on home build using ideneb v1.6 10.5.8 dvd

I've done a successful install using commands -x -v cpus=4 busratio=15, ran install, made partition on fresh HD as ahci sata and ran dvd on ide dvd player.. anyways, i followed the directions on the wiki.osx86project site to the tee for my setup as far customization

my setup is as follows:
AMD Phenom II x2 550
Gigabyte GA-MA785GM-US2H F5 Bios
SATA Seagate 500gb 7200rpm 12mb cache set AHCI in bios
Zotac 8400GS 512MB Video Card
TP-Link TL-WN851N pci card

Customizations are:
Bootloader: chameleon RC2
Kernel: Voodoo 9.5.0
OpenHaltRestart
ps/2 Drivers:
Voodoo PS/2
Fixes:
IOUSBFamilyFix
Seatbelt Fix
VoodooUSBEHCI

Chipset:
AppelATIATA

Video:
NVidia Enablers
NVinject
512mb

if any of these are incorrect for any of the following please let me know..

as far as the problem, after installation was complete i restarted and booted with busratio=15 as noted on osx86 wiki site.. I got to the grey apple screen, (now the first time) the screen loaded for about 10-15mins and then went black, 5 mins later the welcome video came on and then proceeded to the language and registration screen, i continued to the name screen, that's when i realized my keyboard wasn't working (which is odd cuz it worked prior to the registration screen, its not usb)... i couldn't continue so i restarted the pc and plugged in a usb keyboard and re-enabled it in bios.. then i would boot with busratio=15, grey apple screen 10-15mins then black... no video, no language, no registration... just black screen then monitor goes into stanby after a while...

can anyone please help me solve this issue.. its driving me nuts!

please let me know of any info u may need for u to assist me..

thanx in advance!!
Mike