Hi all,

Has anyone got tiger or leopard working with this specs? I already tried, kalyway 10.5.2 (keeps rebooting the pc) and iatkos 5i freezes @ the first grey screen. Any1?

Asus P4P800 Deluxe
Intel Pentium 4 Hyp. 3.0

thnx,
fiko

43 views and no reactions?! come on guys.
need some help here !

Can you tell us your FULL specs?

Hi,

thnx for your reaction! here are my specs.

- Processor: Intel Pentium 4, 3000 MHz (15 x 200)
- Motherboard: Asus P4P800 Deluxe (5 PCI, 1 AGP, 1 WiFi, 4 DDR DIMM, Audio, Gigabit LAN, IEEE-1394)
- Motherboard Chipset: Intel Springdale i865PE
- Memory: 2048 MB (DDR SDRAM)
- Bios type: AMI (10/14/04)(1019.005)
- GPU: RADEON 9600 SERIES (128 MB)
- Sound: Analog Devices AD1985 @ Intel 82801EB ICH5 - AC'97 Audio Controller [A-2/A-3]
- Network: 3Com Gigabit LOM

cheers,
fiko

Ok looks pretty nice, check if you have AHCI or IDE Support in the BIOS, Disable onboard thingys like lan and audio.

Download a distro like iatkos 5i or kalyway and good luck

Originally Posted by icchansan

Ok looks pretty nice, check if you have AHCI or IDE Support in the BIOS, Disable onboard thingys like lan and audio.

Download a distro like iatkos 5i or kalyway and good luck

@icchansan:

Hi, ik tried almost every disk outthere. Almost all of them seem to install succesfully. But there is one problem, Leopard wont boot... After a succesful installation, it doest boot into the OS.

Any ideas?

thnx,
fiko

Did you customize your installation? how? can you tell me what are you selecting? and what distro did you test so far?

Originally Posted by icchansan

Did you customize your installation? how? can you tell me what are you selecting? and what distro did you test so far?

The last one i used was iatkos 5i.I installed the latest PC_EFI and i didnt choose any kernel. i left almost everything blank actually. Also it seems to have some problem with the USB HUB. i am using a sata harddisk. Any ideas ?

I see, well your installing Vanilla, but your system dont support it, so you have to choose a Patched Kernel like Modbin or Speedstep, try with this and good luck

Originally Posted by icchansan

I see, well your installing Vanilla, but your system dont support it, so you have to choose a Patched Kernel like Modbin or Speedstep, try with this and good luck

I tried the Jas 10.4.8, it boots from dvd and i typed -v. It gives me this error:

USB Notification: The EHCI Root Hub Stimulation"@ 0xfd000000 has caused an overcurrent condition, and it keeps repeating the same error. No further progress.

Any ideas ?

thnx