So I've been trying to install and so far install is succesful but it does not boot to the Mac Os.

Also from my other post on the other section I posted by mistake.


Originally Windows 7 was already preinstalled.

I downloaded iDeneb v1.6 10.5.8 lite edition for the Hp Touchsmart Tx2z Tablet Laptop I then used a program called Easus Partition Manager and created a unformatted partition I then rebooted everything worked fine got to my windows os. I then download and burned the iDeneb v1.6 lite disk and booted it then entered it did the setup by disk utilities and selecting the partition clicking erase and renaming. I then select the partition I made continue to install and installed

iDeneb Main System
iDeneb OSx86 Components 10.5.8 Ready
Bootloader
Chameleon v2
Kernel
9.8.0 Kernel Qoopz (or) 9.5.0 Kernel Voodoo
iDeneb x86 Essential Patches
AppleDecrypt
PS/2 Drivers
Apple PS/2 Old
Drivers
Audio
AppleAzaliaAudio
Network
Wireless
Broadcom Wifi
System Management
VoodooBattery Manager
Cleanup

I then continued on which then I finished but the problem is now that when I allow it to restart it goes to the boot screen but nothing is there screen is blank with the _ cmd line blinking. I also tried booting the disk again but it goes back to the setup. I can't boot either Windows or Mac and I am trapped with a boot screen if it isn't possible to install Mac is there a way to get back to Windows or am I missing a step. If anyone could help I'd really appreciate it.

I also tried typing -s and then mount -uw / but they say locked or not writable.

*I have booted into windows finally luckily but if anyone is able to help step by step tutorial for my Tx2z I'd really appreciate it.*

I've an touchsmart 600-1210de
I installed iatkos l2 and windows 7 (dual boot)
It was bootes succesfully.
Only touchscreen does not work!

Any idea?

hi,

start your pc with the ideneb cd inserted in the drive

go to boot option and boot from the cd

you will be seeing the screen saying to "press any key to boot from cd"

dont press anything wait for sometime it will boot to mac os

if it doesn't press enter after it shows boot:

it boots to osx

after u enter into ur os

goto terminal and type the command
"fdisk -u/dev/disk0"

press enter

enter ur password if prompts and restart ur system

it should now boot without cd