Page 1 of 2 12 LastLast
Results 1 to 10 of 11
Discuss Need help with Dell Inspiron 6000 instalation at the Installation - Hackint0sh.org; I have tried installining with iDeneb v1.6, and had no luck. i can install but ...
  1. #1
    Professional Array

    Join Date
    May 2010
    Posts
    95
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    8

    Default Need help with Dell Inspiron 6000 instalation

    I have tried installining with iDeneb v1.6, and had no luck. i can install but then i just get a blue screenhelp me out? I was told to post here. apparently its my graphics. DJ, you said you would give me the list of kexts and what i need, can you tell me how to install the kexts as well? thanks a ton...

    You said I needed to get iatkos 5i. I found the torrent for it, but noone is seeding! What do I do?
    Last edited by redman; 05-27-2010 at 05:16 AM.



  2. #2
    Senior Professional Array Dj Osiris's Avatar

    Join Date
    Jan 2010
    Posts
    439
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    43

    Default

    Umm...I'm sorry bkribbs I can't offer much help with torrents because of forum rules. However should you Go0gle "iATKOS v5i" I'm sure you will find many places . About Kext installation I'm sorry I really don't have much time to post more than the list for your board, but perhaps ratvn can help you with the manual commands should you need them. Here is the Kext to try for your install:

    iATKOS v5i

    iATKOS v5i Main System
    Bootloader
    PC EFI V9
    X86 Patches
    Decrypters
    AppleDecrypt
    SMBIOS driver
    SMBIOS Enablers
    SMBIOS - EFI Air
    SMBIOS for X86
    AppleSMBIOS-27 6th rev. MacBook
    Kernel
    9.5.0 kernal voodoo
    ACPI
    APIC driver
    Disabler.kext
    OHR
    Remove Thermal kexts-> Drivers
    VGA
    Graphics Update
    Intel
    GMA950
    GMA950 b
    System
    Intel AHCI SATA or SATA/IDE
    Speedstep
    Intel Speedstep b
    Laptop Battery
    NTFS-3G
    Network
    Broadcom 440x


    After you have selected the above options and your install is complete. You will need these two Kext installed to get your card working hopefully with QE/CI. GMA950 kext file should be put into S/L/E (System/Library/Extensions )and OpenGL.framework should be put into S/L/F (System/Library/Frameworks).


    Download


    Enjoy


    .
    Last edited by Dj Osiris; 05-27-2010 at 05:41 AM. Reason: Corrected info

  3. #3
    Professional Array

    Join Date
    May 2010
    Posts
    95
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    8

    Default

    Actually, I can't find it. It appears to be dead. None from any sites are working.

    Wow. I am about to be super pissed. Could someone please try to download it just to see if someone is seeding? I am pretty sure my f(&*ing ISP has blocked my torremt ports...

    EDIT- Apparently, mu linux live cd torrent doesnt work. idk. but can someone instruct me very detaildly on the installation of kexts? and when to do so?
    Last edited by redman; 05-27-2010 at 10:03 PM.

  4. #4
    Professional Array

    Join Date
    May 2010
    Posts
    95
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    8

    Default

    Quote Originally Posted by Dj Osiris View Post
    Umm...I'm sorry bkribbs I can't offer much help with torrents because of forum rules. However should you Go0gle "iATKOS v5i" I'm sure you will find many places . About Kext installation I'm sorry I really don't have much time to post more than the list for your board, but perhaps ratvn can help you with the manual commands should you need them. Here is the Kext to try for your install:

    iATKOS v5i

    iATKOS v5i Main System
    Bootloader
    PC EFI V9
    X86 Patches
    Decrypters
    AppleDecrypt
    SMBIOS driver
    SMBIOS Enablers
    SMBIOS - EFI Air
    SMBIOS for X86
    AppleSMBIOS-27 6th rev. MacBook
    Kernel
    9.5.0 kernal voodoo
    ACPI
    APIC driver
    Disabler.kext
    OHR
    Remove Thermal kexts-> Drivers
    VGA
    Graphics Update
    Intel
    GMA950
    GMA950 b
    System
    Intel AHCI SATA or SATA/IDE
    Speedstep
    Intel Speedstep b
    Laptop Battery
    NTFS-3G
    Network
    Broadcom 440x


    After you have selected the above options and your install is complete. You will need these two Kext installed to get your card working hopefully with QE/CI. GMA950 kext file should be put into S/L/E (System/Library/Extensions )and OpenGL.framework should be put into S/L/F (System/Library/Frameworks).


    Download


    Enjoy


    .
    I'm lost. I downloaded that link you gave me. But I don't know where the files are that you are talking about, as there is almost a maze of folders/files. Could you point them out to me? And there are like 5 appleintegradedframbuffer.kexts in there. and i dont see OPENGL.framework in there.

    what was I supposed to select under systm? i hit intel sata, as I cant enable AHCI in bios.

    also, how do i go about updateing this to 10.5.8? can i use apples system updater?

    and how do I use my wireless card? when I go to settings, it says there isnt an airport installed?

    and should I give apple my registration with my adress and everything?

    and can i get my PCMCIA slot to work?
    Last edited by redman; 05-28-2010 at 03:40 AM.

  5. #5
    Professional Array

    Join Date
    May 2010
    Posts
    95
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    8

    Default

    Ok guys. I have it installed. Here are my questions.

    Should I send in my registration and stuff as it isn't a mac?

    The video kexts you pointed me to here? Can you explain where those are and how to use them? Or would this work? http://www.kexts.com/view/88-gma950.html

    How can I enable my wireless card? Will this work? http://code.google.com/p/iwidarwin/

    How can I enable the PCMCIA slot?

    How can I enable the USB ports? Would either of these help? http://rapiddigger.com/download/inst...5-zip-4149357/ http://www.filestube.com/34e837ec5fa...xt-10-5-5.html

    edit. USB ports now work.

    The trac pad seems to lag a bit. What can I do?

    And, how can I get my laptop to correctly sleep?

    Thanks for all you have done so far.

    Oh, and if whatever needs to be done requires an install, that is fine. I screwed it up last night trying to mount the wireless thing, and now it wont boot. So I am going to reinstall and make a small partition for my music anyway.
    Last edited by redman; 05-28-2010 at 10:23 PM.


  6. #6
    Professional Array

    Join Date
    May 2010
    Posts
    95
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    8

    Default

    Hey. I just reinstalled. I really need wireless. Help?

  7. #7
    Professional Array

    Join Date
    May 2010
    Posts
    95
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    8

    Default

    Come on. Help me out! Your leaving me hanging...

  8. #8
    Professional Array

    Join Date
    May 2010
    Posts
    95
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    8

    Default

    I now have wifi working, but only with open networks.

    How do I do this? I'm trying to get the PCMCIA slot working

    As root, type "dmesg | grep PC"; you should see something being found

  9. #9
    Professional Array

    Join Date
    May 2010
    Posts
    95
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    8

    Default

    Ok guys heres an update. I used the iwidarwin drivers for my 2915abg card. It sucked. So, I swiped my moms old PCMCIA linksys card and it works. I got the PCMCIA slot working obviously too. I also just got the video card up and running. I still need help with:

    -webcam. I have a intel cs330, which supposedly works. But I don't know where to find the kexts.

    -sleep. Is there a way to make it sleep correctly? So I can close it, and not have to turn it back on when I reopen it?

    -battery. Battery life sucks to. I get 45 freaking minutes... How can I improve that?

    -heat. It seems to run pretty hot. How can I fix that?

    Thanks so much!
    Last edited by redman; 05-31-2010 at 07:56 PM.

  10. #10
    Professional Array

    Join Date
    May 2010
    Posts
    95
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    8

    Default

    Bump. Help with this please!:

    -battery. Battery life sucks to. I get 45 freaking minutes... How can I improve that?

    -heat. It seems to run pretty hot. How can I fix that?

    Thanks so much!

    PS- People that want a good webcam, XBox live cams work flawlessly!


 

 
Page 1 of 2 12 LastLast

Similar Threads

  1. Snow Leopard on Dell Inspiron 6000
    By dennischan in forum Installation
    Replies: 0
    Last Post: 12-02-2010, 06:27 AM
  2. Install 10.6 on Dell Inspiron 6000
    By redman in forum Installation
    Replies: 0
    Last Post: 10-23-2010, 06:15 PM
  3. Dell Inspiron 6000 Hackintosh
    By liftop in forum Installation
    Replies: 0
    Last Post: 08-24-2010, 11:08 PM
  4. Dell Inspiron 1525 Instalation, Help!!
    By Mn0R in forum Installation
    Replies: 3
    Last Post: 02-04-2009, 06:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 02:41 PM.
twitter, follow us!