Results 1 to 2 of 2
Discuss Issues Samsung N130 at the Installation -; Hey there, I have sucessfully installed Kalyway 10.5.2 on my Intel based Samsung N130. Great ...
  1. #1
    Newbie Array

    Join Date
    Dec 2009
    Post Thanks / Like
    Rep Power

    Default Issues Samsung N130

    Hey there,

    I have sucessfully installed Kalyway 10.5.2 on my Intel based Samsung N130.
    Great experience - thanks to all developers =)

    I still have these problems:
    - no connection to internet (no lan/no wlan)
    --> would a wlan stick like this one work without problems:
    Digitus WLAN Adapter USB2.0 Stick 54MBit: Elektronik
    --> do you know better ones
    - sound (I think I know how to fix it)
    - USB works only if it has been plugged while booting
    --> will it automatically fix if i connect to Internet and update?!
    - 800*600 Automatically detected Screen Resolution is not the right one
    - and some other problem, which are not interesting for me...

    Hope anybody can help me,
    thanks Lisa

  2. #2
    Newbie Array

    Join Date
    Sep 2009
    Post Thanks / Like
    Rep Power


    I don't know if the N130 is exactly like the N120, but this worked for my video (from either this or InsanelyMac forum--I can't remember which)

    You can also boot into OS X at this time first if you want to setup your account first then follow the steps below

    So now that OS X is installed when the mini reboots and you see the Chameleon boot loader. press any key to enter setup.
    now type -s you should see boot: -s on the bottom left hand side of the screen, now press enter and it should boot you into single user mode.
    with you get the command prompt it will look like this:
    :/ root#
    now type /sbin/fsck -fy and press enter
    after it does its thing type: /sbin/mount -uw / and press enter
    don't forget that / after -uw or you will not have write access.

    Do Exactly as I say or you will hate life =)
    Type: cd System/Library and press enter
    Type: rm -r Extensions.mkext and press enter
    Type: cd Extensions and press enter
    Type: rm -r AppleIntelGMA*.* and press enter
    Type: rm -r AppleIntelIntergrated*.* press tab and it will fill in the rest for you and press enter
    Type: shutdown -r now
    This will remove the kext cache and all of the Intel Graphic drivers because they do not work correctly (stuck at 800x600) and the system should now reboot. If all went well you should be at the screen to enter in all of your info and user account =)

    Once you are at the desktop of OS X you can now install the video drivers from the Display Package I put together (I take no credit for the actual Drivers)
    here is the link again:
    * ( 353K ) Number of downloads: 1437

    and OSXTools OSXTools 1.0.150

    You can download them directly or download them on another computer and put the files on a flash drive, just make sure to copy them to the Desktop to make things easier.
    Once you extract The Display Package to the Desktop you should have these folders:

    Now Start OSXTools and click install kexts
    browse to the dir First and select all (3) kexts
    and click install.
    After the kexts instal with will pop up asking to reboot DO NOT REBOOT!!!!!!!!!!!!!!!
    if you reboot you will have to go into single user mode again and remove all the files again SO DO NOT REBOOT YET! CLICK CANCEL
    Now open the folder Second and click on GMA950.pkg and a setup window will pop up.
    click continue, click install put in your password if you have one and proceed. after the install you can now reboot.

    Once you reboot you should be back at the OS X desktop but now with working 1024x600 resolution! you can now enable Quartz.

    Enable Quartz
    To enable Quartz open OSX86 Tools and click the Enable/Disable Quartz GL button. It will tell you the current status. If its disabled, feel free to enable it by clicking the button that says "Enable Quartz GL". after Quartz is enables the system will need to rebooted.

    You should now be fully working on OS X 10.5.7
    You can also update from the Software Update by click on the apple logo on the top left.
    Make Sure you UNCHECK AirPort Utility Software Update or you will be left without a Wireless Connection! if you wind up updating AirPort Utility Software Update you will have to track down the BCM43xx kext and reinstall it. but make life easy and uncheck AirPort Utility Software Update.
    My ethernet is the Marvell Yukon 88E8056 I believe, so I had to find the AppleYukon2.kext and that worked. I switched to an Airport Extreme card from eBay for wireless.

    Hope this helps.



LinkBacks (?)

  1. 04-05-2010, 02:46 PM

Similar Threads

  1. External monitor issues, Samsung N110
    By Twimfy in forum Kernel / Kext (Driver) Support
    Replies: 5
    Last Post: 03-04-2013, 11:52 PM
  2. iAtkos v5/v7 and netbook Samsung N130
    By salvadiaz in forum Installation
    Replies: 1
    Last Post: 12-24-2009, 04:55 PM
  3. Samsung N130 netbook Distro
    By anubis_sg1 in forum Distributions
    Replies: 1
    Last Post: 12-24-2009, 04:53 PM
  4. Issues Samsung N130
    By magicsailor in forum Installation
    Replies: 0
    Last Post: 12-07-2009, 12:08 PM
  5. MacNN: Samsung adds N130, N140 netbooks
    By hackint0sh in forum Latest Headlines
    Replies: 0
    Last Post: 09-04-2009, 03:40 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012
All times are GMT +2. The time now is 02:58 AM.
twitter, follow us!