Hi,

I new to all the hackintush stuff, and I would like to install os x on
my computer.


I downloaded ISO of leopard (iDeneb v1.3 10.5.5), but it got stacked in the loading screen
(Due to hardware incompability or lack of patch as I understood).


My computer specs' is as the following:

CPU Type
QuadCore Intel Core 2 Quad Q9400, 2666 MHz (8 x 333)
Motherboard Name
Asus P5Q (3 PCI, 2 PCI-E x1, 1 PCI-E x16, 4 DDR2 DIMM, Audio, Gigabit
LAN, IEEE-1394)
Motherboard Chipset
Intel Eaglelake P45
System Memory
3328 MB (DDR2-800 DDR2 SDRAM)
DIMM2: OCZ XTC Platinum OCZ2P8002G 2 GB DDR2-800
DDR2 SDRAM (6-6-6-18 @ 400 MHz) (5-5-5-15 @ 333 MHz) (4-4-4-12 @
266 MHz)
DIMM4: OCZ XTC Platinum OCZ2P8002G 2 GB DDR2-800
DDR2 SDRAM (6-6-6-18 @ 400 MHz) (5-5-5-15 @ 333 MHz) (4-4-4-12 @
266 MHz)
BIOS Type
AMI (11/04/08)
Video Adapter
NVIDIA GeForce 9800 GT (512 MB)
Audio Adapter
Creative CA20K1 X-Fi Xtreme Fidelity Audio Processor
Storage:

IDE Controller Intel(R) ICH10 Family 2 port Serial ATA
Storage Controller 2 - 3A26
IDE Controller
Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20
Storage Controller Marvell 61xx
RAID Controller
Disk Drive ST31000528AS
(1000 GB, 7200 RPM, SATA-II)
Disk Drive ST3500320AS
(500 GB, 7200 RPM, SATA-II)
Disk Drive WDC WD25
00JB-00GVC0 SCSI Disk Device (232 GB)

Network Adapter Atheros
AR8121/AR8113/AR8114 PCI-E Ethernet Controller



I left one partition of 20 GB, not formatted dedicated for the installtion.


My question is which installtion I need to choose, and what else I
need to install, in order to have os x and windows - e.g dual boot.
As I read here for my motherboard I need to install something directly
to the bios - is there a way out of it (Better say: is this operation
risky?).


Thank you for your time

Try following this guide

-_- P5Q PRO & MAC OS X Leopard 10.6 (10A432 ) Retail -_- - InsanelyMac Forum

and dont forget to report back, ima close this thread, search a bit cuz there lots of threads here with the same mobo.