Hi There,
I realy need to help about the install iDeneb 1.4 MacOs 10.5.6
I tried many times with many combination of iDeneb install config, i have gigabit main board and i saw in the wiki this main board compitable with current install version (iDeneb 1.4 MacOs 10.5.6),

when setup completed successfuly Leopard can't load itself during the loading operating system, during the load after three minutes block icon shown. please look at the image



And my machine configuration is


3Com Wireless ethernet (108 Mbs)
Graphic processor NVidia GeForge 9500 GT
22 Hi-performance Acer new generation LCD monitor.
MS/MS-Pro, SD/MMC, SM/xD-Picture card reader.
Pinacle DC10 Plus video capture card

Processor(s)
Number of processors 1
Number of cores 4 per processor
Number of threads 4 per processor
Name Intel Core 2 Quad Q6600
Code Name Kentsfield
Specification Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Package Socket 775 LGA
Family/Model/Stepping 6.F.B
Extended Family/Model 6.F
Core Stepping G0
Technology 65 nm
Core Speed 1600.1 MHz
Multiplier x Bus speed 6.0 x 266.7 MHz
Rated Bus speed 1066.7 MHz
Stock frequency 2400 MHz
Instruction sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T
L1 Data cache (per processor) 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache (per processor) 4 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache (per processor) 2 x 4096 KBytes, 16-way set associative, 64-byte line size

Chipset & Memory

Northbridge Intel P35/G33/G31 rev. 10
Southbridge Intel 82801GB (ICH7/R) rev. A1
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 3072 MBytes
Memory Frequency 333.3 MHz (4:5)
CAS# Latency (tCL) 5.0 clocks
RAS# to CAS# (tRCD) 5 clocks
RAS# Precharge (tRP) 5 clocks
Cycle Time (tRAS) 15 clocks
Command Rate (CR) 2T

System

System Manufacturer Gigabyte Technology Co., Ltd.
System Name G31M-S2L
System S/N
Mainboard Vendor Gigabyte Technology Co., Ltd.
Mainboard Model G31M-S2L
BIOS Vendor Award Software International, Inc.
BIOS Version F5e TD
BIOS Date 05/14/2008

Memory SPD

Module 1 DDR2, PC2-5300 (333 MHz), 2048 MBytes, Crucial Technology
Module 2 DDR2, PC2-5300 (333 MHz), 1024 MBytes, Crucial Technology

i realy need yours help and suggestions.
What am i doing wrong ? What should i do ?

Regards