Discuss iATKOS v7 on Abit AA8 at the Installation - Hackint0sh.org; I read in this page HCL 10.5.8 - OSx86 that my motherboard does indeed work ...
iATKOS v7 on Abit AA8
I read in this page HCL 10.5.8 - OSx86 that my motherboard does indeed work with OS X and this was the method to do it. I tried installing it with all the drivers selected that I had. I selected all the correct ones and I'm not sure what to do now because when my machine boots it goes through the Chameleon boot menu and then the apple logo comes up and the hard drive stops spinning and the machine hangs. I know it can be done from the post on Wikipedia and I am using iATKOS to install OS X. I am using a 64 bit hyperthreaded processor. It's a Pentium 4 650 running at 3.4 GHz. I am trying to figure out why it hangs. Here is the typed list of hardware that appears under the hardware button in the menu.
8086:244e Intel Corp 82801 PCI Bridge
104c:8024 Texas Instruments TSB43AB23 IEEE-1394a- 2000 Controller (PHY/Link)
10ec:8169 Realtek Semiconductor C. RTL-8169 Gigabit Ethernet
8086:2640 Intel Corp 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge
8086:2658 Intel Corp 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI
8086:2659 Intel Corp 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI
8086:265a Intel Corp 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI
8086:265b Intel Corp 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI
8086:265c Intel Corp 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
8086:266f Intel Corp 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller
8086:2652 Intel Corp 82801FR/FRW (ICH6R/ICH6RW) SATA Controller
8086:266a Intel Corp 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller
8086:2668 Intel Corp 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller
8086:2585 Intel Corp 82925X/XE PCI Express Root Port
1002:5b72 ATI Tech RV380 [Radeon X600]
1002:5b62 ATI Tech RV380 [Radeon X600 (PCIE)]
8086:2584 Intel Corp 82925X/XE Memory Controller Hub
I tried wiping the 40 GB HD I have with MBR or GUID and it didn't fix anything. Do I have incompatible RAM? Am I missing something? Is my Bios not set up right?
This is an earlier thread from the forum infinitemac.com
Getting OS X Snow Leopard to work with ABIT AA8 Duramax
I have read up on how it seems fairly easy (at least compatible) to modify my existing hardware to boot OS X 10.6.
I have an AA8 Duramax and I just updated the bios to the newest one because the old one was five years old. It has a 64 bit Intel Pentium 4 (3.4 GHz) with hyperthreading. If possible I would like to boot a 64 bit Snow Leopard and also have hyperthreading work. This is the chipset it has.
Intel 925X / Intel ICH6R Express Chipset.
It also has SSE2 and 3.
It also has an ATI X300? (Windows actually doesn't know, it names three different cards) but it is a 256 MB Dual Dvi card and I was wondering if it would work with OSX as well. If not, no worries.
I also have 4 GB of RAM installed and three hard drives at my disposal (the one I want to put the OS on is a 40 GB 7200 RPM Western Digital).
I already loaded the Snow Leopard ISO onto an 8 GB cruzer flash drive and am now ready to edit the files on it so it will boot on my desktop. I also have a Macbook Pro with Snow Leopard and I've done all my work on that thus far. I have a liquid cooling kit on it and I was wondering how OS X does with overclocking?
Anyway I would just like to know for starters what to do now that I've successfully loaded the flash drive and I was curious if anyone has done this on a P4 or with this board.
Thanks guys, look forward to your advice.
By doublekid in forum Hardware
Last Post: 08-30-2010, 07:32 PM
By whoinow in forum Installation
Last Post: 04-12-2009, 05:03 AM
By mitro in forum Hardware
Last Post: 05-16-2006, 01:31 AM
Last Post: 05-13-2006, 12:56 PM
Last Post: 05-13-2006, 12:55 PM