Results 1 to 3 of 3
Discuss Help with Ideneb v1.4 10.5.6 at the Installation -; I am very new to this ideneb. I have spent two days reading, installing, reading, ...
  1. #1
    Newbie Array

    Join Date
    Apr 2009
    Post Thanks / Like
    Rep Power

    Default Help with Ideneb v1.4 10.5.6

    I am very new to this ideneb. I have spent two days reading, installing, reading, installing, well you get the picture. I have an HP a6442p pc with all the stock parts. I can not find the proper settings. I have a seperate partition for Vista, and one dedicated to Mac. Can anyone help me?. I can post specs if necessary. Ideneb v1.4 10.5.6

  2. #2
    Newbie Array

    Join Date
    Apr 2009
    Post Thanks / Like
    Rep Power


    Please post specs and I will attempt to help you.

  3. #3
    Newbie Array

    Join Date
    Apr 2009
    Post Thanks / Like
    Rep Power

    Default Specs

    This is the best i can find:
    Motherboard description
    Motherboard manufacturer's name: Asus IPIBL-LB
    HP/Compaq name: Benicia-GL8E
    Socket: 775
    Supports the following processors:
    Intel Core 2 Quad (Yorkfield core) Q9xxx
    Intel Core 2 Duo (Wolfsdale core) E8xxx
    Intel Core 2 Quad (Kentsfield core) up to Q6600
    Core 2 Duo E6x00 (Conroe core) up to E6700
    Core 2 Duo E4x00 (Conroe core) up to E4400
    Front-side bus (FSB)
    800/1066/1333 MHz
    Intel G33
    BIOS features
    Keyboard combination to used to enter BIOS: F10
    System BIOS core brand: Award
    Form factor
    micro-ATX: 9.6 in X 9.6 in
    Dual channel memory architecture
    Four 240-pin DDR2 DIMM sockets
    Supported DIMM types:
    PC2-5300 (667 MHz)
    PC2-6400 (800 MHz)
    Non-ECC memory only, unbuffered
    Supports 2GB DDR2 DIMMs
    Supports up to 8 GB on 64 bit PCs
    Supports up to 4 GB* on 32 bit PCs

    NOTE: *Actual available memory may be less
    Expansion slots
    One PCI
    One PCI Express x16 graphics (for graphics cards)
    Two PCI Express x1 (for cards such as network, sound, tv-tuner)
    Video graphics
    Integrated graphics using Intel GMA 3100
    Also supports PCI Express x16 graphics cards

    NOTE: Either integrated graphics or the PCI Express x16 slot are usable at one time; they are not usable concurrently.
    Serial ATA
    Six SATA connectors:
    Supports 1 SATA-150 or SATA-300 disk drive on each SATA connector
    Speed up to 1.5Gb/sec or 3.0Gb/sec, complying with SATA 1.0 and SATA 2.0 specifications

    NOTE: The faster rate of 3.0Gb/sec requires that both the hard drive and the motherboard support it. If one or the other does not support 3.0 Gb/sec, the PC negotiates down to the slower 1.5 Gb/sec.
    Onboard RAID controller: ICH9R
    Selected Benicia models ship RAID-ready (For Spring 08, only selected CTO models will ship RAID-ready)
    RAID modes supported*:
    RAID 0
    RAID 1

    NOTE: RAID 5 requires three HDDs and RAID 10 requires four HDDs. While this motherboard can support RAID 10, only RAID 0 and RAID 1 modes are supported on computer models using this motherboard.
    Onboard audio
    Audio CODEC: ALC888S
    7.1 channel high-definition audio
    Onboard LAN
    1 Realtek 8111C 10/100/1000 Mb/s (Gigabit Ethernet) Integrated LAN

    NOTE: Gigabit Ethernet is backwards compatible with 10/100 Mb/s network hardware.
    Onboard USB
    USB 2.0
    Twelve ports total
    Four connectors on back panel
    Six headers (four 1x4 and two 2x5 USB headers) support eight additional USB ports/devices

    NOTE: Some USB ports may not be available externally for customer use. For more information, see model specifications.
    Onboard 1394
    Type: IEEE 1394a 400Mb/s
    Agere LFW3227 controller chip
    Two ports total
    One port on back panel
    One header on motherboard supporting one additional port/device
    Back panel I/0
    One PS/2 mouse port (green)
    One PS/2 keyboard port (purple)
    One coaxial SPDIF out
    One coaxial SPDIF in
    One VGA port
    Four USB 2.0
    One 6-pin IEEE 1394a
    One RJ-45 networking port
    Six Stereo-mini audio jacks for:
    Line-in (light blue)
    Microphone-in (pink)
    Line-out (lime)
    Center/Subwoofer-out (yellow-orange)
    Side speaker-out (gray)
    Rear speaker-out (black)
    Internal connectors
    One 24-pin ATX power connector
    One 4-pin ATX power connector
    Six SATA connectors
    One floppy drive connector
    Two 12v fan connectors for CPU fan and PC fan
    One 9-pin header for power button, reset button, power LED, and HDD LED
    Three USB 2.0 headers supporting 6 USB ports or devices
    One IEEE 1394a header
    One SPDIF audio output header
    One 4-pin audio line-input connector (interrupts line input on back panel, Vista capable, requires matching front audio jack module)
    One 9-pin audio header for headphone-out and microphone-in (yellow, Vista capable, requires matching front audio jack module)
    One Intel high-definition Audio/Modem Link (2x8 HDMI connector)
    One jumper for resetting BIOS settings
    One jumper to disable BIOS password checking

    That is from the motherboard specs. I am also running vista on a seperate partition, and please help with any bios settings that i might have goofed. Le tme know if you need more info.



Similar Threads

  1. iDeneb?
    By redman in forum Installation
    Replies: 3
    Last Post: 05-15-2010, 11:01 PM
  2. ideneb 1.3 iso?
    By jitup in forum Installation
    Replies: 1
    Last Post: 04-30-2009, 05:06 PM
    By janisjanis in forum Hardware
    Replies: 10
    Last Post: 04-14-2009, 10:02 AM
  4. help with iDeneb v1.4
    By hypertension in forum Installation
    Replies: 1
    Last Post: 03-03-2009, 07:25 PM
  5. Help with iDeneb 10.5.5
    By royalin in forum Archiv (Leopard)
    Replies: 5
    Last Post: 11-25-2008, 02:29 PM

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012
All times are GMT +2. The time now is 08:12 PM.
twitter, follow us!