Hello,

Currently I am trying to install iPC_OS86x_10_5_6_Universal_PPF5_Final on my windows 7 HP G56-129wm laptop. So far I have partitioned my harddrive and burned the ISO as a disk image on a DVD. But when I try to boot from the DVD it just flashes a cursor and nothing happens.

I'm a total newb at this so any help would be appreciated,

Here are my specs.

CPU
Intel Celeron 900
Code Name: Penryn
Package: Socket P (480)
Technology: 45nm
Specification: Intel(R) Celeron(R) CPU 900 @ 2.2GHz
Family 6 Model 7 Stepping A
Ext. Family 6 Ext. Model 17 Revision RO
Instructions: MMX, SSE (1,2,3,3S), EM64T

Clocks (core #0)
Core speed 2194.7
Multiplier: x 11.0
Bus Speed 199.5MHz
798.1 MHz

Cache
L1 Data 32KBytes 8-way 64-Byte line size
L1 Inst. 32 KByes 8-way 64 Byte Line size
Level 2 1024 KBytes 4-way 64 Byte Line size

Selection Processor #1 Cores 1 Threads 1

Motherboard
Manufacturer: Hewlett-Packard
Model 1605, 90.07
Chipset Intel GL40 Rev. 07
Southbridge Intel 82801IM (ICH9-M)

Bios
Brand Hewlett Packard
Version F.03
Date 07/07/2010

Memory:
General:
Type: DDR2 Channels #: Dual
Size 3072 Mbytes DC Mode Symmetric

Trimmings
Dram Freq: 399.0MHz
FSBram 1:2
CAS# Latency (CL) 6.0clocks
RAS# to CAS# Delay (tRCD) 6 clocks
RAS# Precharge (trp) 6 clocks
Cycle Time (tRAS) 18 clocks

Memory Slot Selection
Slot# 1 DDR2
Module Size 2048 MBytes
Max Bandwidth: PC2-6400 (400MHz)
Manufacturer: Hyundai Electronics
Part Number: HYMP125S64CR8-S6
Serial Number: 167335B7
Correction: None
Week/year: 33/10

Memory Slot Selection
Slot# 2 DDR2
Module Size 1024 MBytes
Max Bandwidth: PC2-6400 (400MHz)
Manufacturer: Micron Technology
Part Number: 8HTF12864HZ-800J1
Serial Number: 8EC86019
Correction: None
Week/year: 26/10

Timings Table JEDEC #1 JEDEC #2 JEDEC #3
Frequency 266 Mhz 33 Mhz 400 Mhz
CAS# Latency 4.0 5.0 6.0
RAS# to CAS# 4 5 6
RAS# to Precharge4 5 6
tRAS 12 15 18
tRC 16 20 24
Voltage 1.80V 1.80V 1.80V

Graphics:
Display Device Selection
Mobile Intel(R) 4 Series Express Chipset
GPU
Revision: 7