Hi,

Trying to install my first OSx86, downloaded Leo4All, iAtkos, Kalyway and JaS.

None of them even get into the installing screen.

Tried to mess with my BIOS options to see if I coud get any further but didn't suceed.

If anyway can give me some pointers I would appreciate it.

Here's my config:

Asus P5Q3 Deluxe Wifi Ap
Intel Core 2 Quad Q9550
4 gb DDR Patriot 1066
500 gb HD Sata II
ATI Radeon HD 4870

Thanks!

With that mobo you should be able to get the installation, whats the error? did you change your SATA Support to AHCI and enable XD BIT, try to disable onboard stuff like lan and audio, and try again.

if you can get the installation try with those distros this:

cpus=1

PPL report success with ideneb but I dont know if they MOD the BIOS, and report back if you have any issues

Hi,

Thanks for the tips. I tried installing with AHCI and using cpus=1 and it worked.

Now it's installed.

After that I couldn't boot in, so I fixed the boot with Vista CD and then installed easybcd, created a boot for macos and now I see the two options.

Then I try to boot into MacOS, if I don't use cpus=1 I get stuck.

If I use cpus=1 then I see the Apple and the write screen, with the icon rotating but it didn't leave in about 10 mins so I decided to boot back into Vista.

Any ideas?

Thanks!

Aja you put ur sata as AHCI, what about enabling XD Bit in the BIOS?

Hey,

Thanks again for helping me. I get the same result using AHCI and XD Bit in my bios as I get with normal configuration, except that when I turn AHCI on I can't boot vista so I have to turn it off to boot Vista.

I took a picture of my screen when I do -v cpus=1



Any ideas?

Thanks!

Yeah you have to change to AHCI between OS, did you customize your installation? and what distro did you use?

Icchansan,

I just did a plain install. Figured I'd give that a try before I started customizing.

The one that worked with cpus=1 was iAtkos 5i

I also have Kalyway, Leo4All v3 and JaS 10.5.4

Should I try to reinstall customized? Which distro?

Thanks

Yeah customize your Installation

Uhh,

Ok customized with everything I thougnt "could" be connected to my hardware, installation was ok but I'm stuck at the same point again (the screenshot I sent earlier).

I'm running out of ideas...

Any help?

Thanks

Did you install acpiplatform? in the customize sometimes say, acpi fix or something like that, i dont have iatkos v5 to check, try installing this with all ur stuff and good luck, post back if there any progress