Page 30 of 33 FirstFirst ... 102021222324252627282930313233 LastLast
Results 291 to 300 of 330
Discuss [Tutorial] How to testpoint downgrade bootloader and unlock OTB 1.1.2 at the Hardware Unlock - Hackint0sh.org; So heres how i downgraded to 102. It was jailbroken on 112. I put it ...
  1. #291
    Professional Array

    Join Date
    Dec 2007
    Posts
    93
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    11

    Default

    So heres how i downgraded to 102. It was jailbroken on 112. I put it in restore mode, downgraded to 111. From there it was obviously still in restore mode, so I just tried click restore to 102 now. Didnt work, got error 2003. So I took it off the plug, plugged it back in, tried again, said Error 1 now. So that obviously doesnt work.

    What I did then was opened up iBrickr, kicked it out of restore mode.
    Then once it got to the activate screen, I opened up iTunes again, let iTunes recognize the phone so I got to that "Click continue to start activation" or whatever, then since I still had iBrickr open, I like iBrickr put it in DFU mode. Then restored it down to 102.
    And poof it worked. Of course it says Error 1013, but thats fine, just let iBrickr kick it out of restore mode.
    From there on just jailbreak/activate it like i said. With iBrickir/activation.bat(PAYCAY).


  2. #292
    Newbie Array

    Join Date
    Feb 2008
    Posts
    2
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    hi im new to this hacking iphone thing....and i need to downgrade from 1.1.2 to 1.1.1

    ummm i was reading http://iphone.unlock.no/bootloader_downgrade.htm

    and it said that i need to physicly open my iphone and dont do it unless i know wat im doing.....wat does it mean by physivly open it??

    it says it in the first paragraph on that site.

    i could rly use any1s help...thx

  3. #293
    Newbie Array

    Join Date
    Feb 2008
    Posts
    1
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Hi, I have same problem - no wi fi, need repair, but ... I can not downgrade to 1.0.2, Itunes says " waiting for Iphone" .
    Any ideas?
    P.S. Phone is really slow, if I try to dial something in emergency dial screen, it reacts after 5 seconds if I press any button.

  4. #294
    Rookie Array

    Join Date
    Feb 2008
    Location
    Italy
    Posts
    16
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by ernisrx View Post
    Hi, I have same problem - no wi fi, need repair, but ... I can not downgrade to 1.0.2, Itunes says " waiting for Iphone" .
    Any ideas?
    P.S. Phone is really slow, if I try to dial something in emergency dial screen, it reacts after 5 seconds if I press any button.
    same situation... no way

  5. #295
    Rookie Array

    Join Date
    Jan 2008
    Posts
    18
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    to all who have "waiting for phone" when downgrade to 102 - you have iphone w48+, this phone can't down to 102, one way to unlock this phone (if you don't have wifi), place comm board to other activeted 111 or 102 and retry the unlock process
    sorry for my english


  6. #296
    Rookie Array

    Join Date
    Dec 2007
    Posts
    16
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by p01s0n View Post
    same situation... no way
    I also!!!!!!!!!!! Guys please!! Help!!!! us!!!

    I don't know what to do....

  7. #297
    Professional Array Gstar's Avatar

    Join Date
    Jan 2008
    Location
    Germany
    Posts
    92
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    11

    Default

    hi guys,

    you are all able to restore to 1.0.2. i did it many times.
    put the phone in dfu mode. connect to itunes and start the retore with the shift-key-trick to select the firmware. if itunes says error(1) and the restore stops just close itunes and the ituneshelper.exe in the tastwindow. then start ibirckr and select restore to 1.0.2. your display turn white and your phone is now prepared for restoring. now open itunes again and retsore while ibrickr is running. after the restore close both programs. then open itunes again and it gives you the "wrong sim card" message. close itunes. open ibrickr and click "free my phone". once it is jailbreaked the activation screen appears and you can activate it with pagacy. thats it. after that you install the pxl file system via ibrickr and follow the instruction from ibrickr during this process. now you are able to install the needed apps. first the bsdsubsystem. then the other apps. when i installed i used the pxl-file-method because all files have the correct permissions and are put in the correct dir especially the bbtools.pxl. you can find the pxl files here: http://iphone.exploit.org/ . the bbtools.pxl is in the gezzuzz thread.

    this works 100%.
    good luck.

  8. #298
    Senior Professional Array

    Join Date
    Jul 2007
    Location
    Bergen, Norway
    Posts
    174
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    16

    Default

    Quote Originally Posted by Gstar View Post
    when i installed i used the pxl-file-method because all files have the correct permissions and are put in the correct dir especially the bbtools.pxl.
    So you used the PXL i linked to previously in this thread? And it installed OK?

  9. #299
    Advanced Array

    Join Date
    Jan 2008
    Posts
    33
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by ernisrx View Post
    Hi, I have same problem - no wi fi, need repair, but ... I can not downgrade to 1.0.2, Itunes says " waiting for Iphone" .
    Any ideas?
    P.S. Phone is really slow, if I try to dial something in emergency dial screen, it reacts after 5 seconds if I press any button.
    If you turn on silent switch, the key pad will run smooth. However, your iphone doesn't have baseband, the emergency call won't work anyway. If possible, follow _hydra_'s comm board reflush way.

    I have tried all the software way to restore to 1.0.2. None of them worked like they were claimed.

  10. #300
    Advanced Array

    Join Date
    Jan 2008
    Posts
    33
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by Gstar View Post
    hi guys,

    you are all able to restore to 1.0.2. i did it many times.
    put the phone in dfu mode. connect to itunes and start the retore with the shift-key-trick to select the firmware. if itunes says error(1) and the restore stops just close itunes and the ituneshelper.exe in the tastwindow. then start ibirckr and select restore to 1.0.2. your display turn white and your phone is now prepared for restoring. now open itunes again and retsore while ibrickr is running. after the restore close both programs. then open itunes again and it gives you the "wrong sim card" message. close itunes. open ibrickr and click "free my phone". once it is jailbreaked the activation screen appears and you can activate it with pagacy. thats it. after that you install the pxl file system via ibrickr and follow the instruction from ibrickr during this process. now you are able to install the needed apps. first the bsdsubsystem. then the other apps. when i installed i used the pxl-file-method because all files have the correct permissions and are put in the correct dir especially the bbtools.pxl. you can find the pxl files here: http://iphone.exploit.org/ . the bbtools.pxl is in the gezzuzz thread.

    this works 100%.
    good luck.
    I used you way, still stuck on "Waiting for iPhone". Looks like it's NOT 100% works.


 

 

Similar Threads

  1. Replies: 0
    Last Post: 07-18-2008, 06:35 AM
  2. Replies: 101
    Last Post: 02-27-2008, 06:27 AM
  3. [Tutorial] How to Downgrade Your Bootloader - with Software Only!
    By TatesMan in forum iPhone "2G" (Rev. 1)
    Replies: 14
    Last Post: 02-16-2008, 10:54 AM
  4. 1.1.2 Unlock (Via Downgrade) Tutorial Up
    By pspsully in forum iPhone "2G" (Rev. 1)
    Replies: 21
    Last Post: 11-11-2007, 06:36 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 09:11 PM.
twitter, follow us!