Results 1 to 6 of 6
Discuss [1.1.2 OTB] HW unlock - worked fine but then a problem with anysim at the Hardware Unlock - Hackint0sh.org; Hi everybody. This is my 3rd 1.1.2 hardware unlock. the first 2 were very smoothly ...
  1. #1
    Newbie Array

    Join Date
    Feb 2008
    Posts
    8
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default [1.1.2 OTB] HW unlock - worked fine but then a problem with anysim

    Hi everybody.
    This is my 3rd 1.1.2 hardware unlock. the first 2 were very smoothly unlocked and worked perfectly.
    My problem with this one is that after i succeeded with the hardware test point, i tried to execute anysim on my now 04.01.13G / 1.1.1 device. I had the "succefull" message from anysim but the cellular carrier signal indicator is not showing any signal. WIFI, bluetooth are working. My modem firmware is 04.01.03G and the CCID number is present in "setting/General".
    Is it possible that i damaged the thin wire on the board while i was connecting the test points with the needle? or if it was damaged the WIFI also shouldn't be working? Because as i mentioned above the wifi is still working.
    it would be really appreciated if somebody can answer me.
    Thanks a lot.

    UPDATE

    I found what was wrong and it worked. Thanks anyway. I will write it bellow soon for people with the same problem as mine. Right now i am assembling my iPhone.
    Last edited by fadytabar; 02-06-2008 at 02:13 AM.



  2. #2
    Newbie Array

    Join Date
    Feb 2008
    Posts
    8
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    As i mentioned in my update, i solved the problem and it was my basebande that was damaged.
    I will write what happened in details and how i solved it, but excuse me for tonight, it's 4:30 AM here and i've been working for more then 6 hours on that dam phone.
    I feel so sleepy and tiered now, till tomorrow then.
    Thanks.

  3. #3
    Newbie Array

    Join Date
    Feb 2008
    Posts
    8
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Hi again,

    What happened with me last night was the following:
    I followed the "How to downgrade bootloader on out of the box 1.1.2" tutorial from iphone.unlock.no with my 3rd phone unlocking and this is when I had that problem.

    The first 2 phones that worked very easily were unlocked by following the "How to hardware unlock the 1.1.2 iPhone firmware with the 4.6 bootloader" tutorial from hackthatphone.com
    Both tutorials are similar except when you finish downgrading your bootloader with the test points. At this stage iphone.unlock.no mentioned to execute this command (bbupdater -f 111.fls -e 111.eep) to repair the baseband I guess.
    The other tutorial doesn’t have this command, instead they tell you to restore to 1.1.2 and then restore back to 1.1.1 to repair back the baseband.

    In brief after I used the first turotial (with the "bbupdater -f 111.fls -e 111.eep") command, anysim didn't work and I had no carrier signal.
    So i switched to the second tutorial and used the restore option and my baseband was flashed and repaired and I continued by jailbreaking and anysim.

    And by the way, never use the WIFI connection to accomplish the hardware unlock tutorial because after the first command that you execute, the WIFI will stop working and you will not be able to communicate with your phone. ALWAYS use the VT100 terminal from within the phone.
    Please if I was wrong I would like for someone to correct me.

    Hope I was clear enough in describing what happened with me and please excuse my bad English.
    NB: to be 100% sure of your unlocking procedure, use the hackthatphone.com tutorial because I used it now to unlock 3 phones and succeeded.


    Thank you and happy unlocking for everybody.
    Last edited by fadytabar; 02-06-2008 at 02:15 AM.

    LF forever

  4. #4
    drg
    drg is offline
    Senior Professional Array

    Join Date
    Oct 2007
    Location
    Canada
    Posts
    479
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    34

    Default

    Quote Originally Posted by fadytabar View Post
    And by the way, never use the WIFI connection to accomplish the hardware unlock tutorial because after the first command that you execute, the WIFI will stop working and you will not be able to communicate with your phone. ALWAYS use the VT100 terminal from within the phone.
    Please if I was wrong I would like for someone to correct me.
    I have it from reliable sources that in 1.0.2 you can do the whole HW unlock over wifi, but you are correct in saying that wifi will cease to function after ienew in 1.1.1.

  5. #5
    Newbie Array

    Join Date
    Feb 2008
    Posts
    8
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    you tryed it on 1.0.2 and you didn't loose the wifi?
    Because the fact that you are sending this command:
    launchctl unload /System/Library/LaunchDaemons/com.apple.CommCenter.plist, you are shutting down the commcenter that is WIFI,Cell signal and maybe bluetooth.


  6. #6
    Senior Professional Array

    Join Date
    Jul 2007
    Location
    Faroe Islands
    Posts
    192
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    16

    Default

    Did you repeat the entire tutorial from hacthatphone.com to get it working or just a 1 or 2 steps?
    Petemag - Running on a 15" MacBook Pro 2.5 GHz and an 8GB iPhone SW unlocked - SW unlocked 45 iPhones and HW unlocked 2 iPhone

 

 

Similar Threads

  1. Replies: 17
    Last Post: 06-23-2009, 07:19 AM
  2. Replies: 3
    Last Post: 01-14-2008, 10:24 PM
  3. Replies: 3
    Last Post: 09-29-2007, 06:58 PM
  4. Replies: 2
    Last Post: 09-18-2007, 06:01 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 03:19 PM.
twitter, follow us!