Greek Translation: http://www.y3k.gr/2008/01/iphone-112-otb-unlock_18.html

Thank you guys!

Some guys should read, read, read, read this forum and other forums an hopefully they won´t talking so much BS anymore...

And btw. AnySim won´t work with the new found secpack as you do not need baseband 4.02.13 which was shipped with 1.1.2OTB but you need baseband 4.03.13 included in firmware 1.1.3 to be patched. So first you need FLS file from 4.03.13 to unlock 1.1.2OTB!!!
If you updated a 4.6 bootload incidentally you need to wait for firmware 1.1.4 with secpack from hopefully with new baseband than.

To get NOR, find it by googleing or find a friend with old bootloader 3.9 and make a nor dump by yourself!


..may 50 cent to that

Originally Posted by friedo72

Some guys should read, read, read, read this forum and other forums an hopefully they won´t talking so much BS anymore...

And btw. AnySim won´t work with the new found secpack as you do not need baseband 4.02.13 which was shipped with 1.1.2OTB but you need baseband 4.03.13 included in firmware 1.1.3 to be patched. So first you need FLS file from 4.03.13 to unlock 1.1.2OTB!!!
If you updated a 4.6 bootload incidentally you need to wait for firmware 1.1.4 with secpack from hopefully with new baseband than.

i guess this goes on me... did you actualy LOOK at anysim source and what is shiped with it?

ill give you a hint:

http://devteam-anysim.googlecode.com...am/anySIM.app/

(if you go 1 folder up you have whole source)

what anysim does is writes only PATCH (not whole baseband) at certain address in CURRENT baseband. To write this patch on 4.6 you need higher version of secpack then current baseband, how files are named is irrelevant, what matters is what BL gets and if it accepts it or not... i read about they added some additional check at bootup so this might break at boot, but it should work in theory....

http://**********.com/files/84724249..._M3S2.rar.html

here you can grab the bootloader 3.09

Originally Posted by SoLoR

ok someone with to many 1.1.2 OOBs try this (THIS MAY BRICK YOUR PHONE):

jailbreak etc etc

install anysim 1.2.1u, inside you will find 04.02.13 secpack and REPLACE it with the one from gorgehotz package (04.03.13 version) keep name from anysim ofc. Then run anysim in airplane mode and post results

edit: this MIGHT be easy way for software unlock

I will do it as I have many iphones in stock.
Tell me in detail and all software needed to do this? I will try it!!!!!!!

Originally Posted by SoLoR

i guess this goes on me... did you actualy LOOK at anysim source and what is shiped with it?

it wasn´t against you as you give tips based on some things and might work...
but here are so many people posting before really reading about their problems but writing really BS instead!!

ps.:
anysim makes a nor dump erases whole baseband and replace it with patched nor...
with bl4.6 you aren´t able to make a nor dump so you have to use ready *.fls in this case it would better to put patched 4.03.13 fls because it will be able to run under 1.1.3 too!

Meanwhile this hardware unlock stuff is not for n00bs, it can't get more simpler...wait some more time for a software unlock.

Originally Posted by jamesdoherty

is this the file i need for step 3?

http://www.unlockthatiphone.com/BOOT03.09_M3S2.fls

ya i would like to now to if this is the file could someone with more experience confirm this?

Your are awesome guys!

I'll post my results soon.


EDIT: Works great!

Flawless victory! Cheers..

If someone can get all the links for necessary files, I will add them to my original post.