Discuss Hardware Combos for new users at the Hardware - Hackint0sh.org; Awesome, thanks icchansan, very helpful.
I haven't run windows with this machine yet, but when ...
-
Awesome, thanks icchansan, very helpful.
I haven't run windows with this machine yet, but when I do I'll post the results in my original post.
For those who are looking to build their first Hackintosh, I would definitely recommend these specs, they worked great for me
-
-
Asus P5W Deluxe
Hey Ich how do you feel about the Asus P5W Deluxe? I see you recomend the P5Q deluxe would the P5W be a similar workable choice? For me this is better as the bang for the buck factor is much better. Are there any guides out there for it that you know of? thanks!
-
-
Hackint0sh Moderator
Array
Yeah that one should work too, theres even guides, google it ;D try and good luck
HP Pavilion Elite m9250f
Snow Leopard 10.6.6, Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) -
How to Install -
Blog -
Hardware Combos -
FAQ by TJ2K7 Macbook Pro 13" iPhone 4
Follow meh:
@icchansan If you just want to support hackint0sh.org with a donation click here 
-
Help
Hey guys!
I'm new to this forum and wondered if you could help me.
I'd like to put up my computer with either leo4all or ipc but i'm not quite sure if it will work. I got 2 different hard drives and would like to install it on the second one.
Here's the rest of my hardware config:
Mainboard: Asus M2N32 SLI Deluxe
Processor: AMD 64 X2 Dual Core 4600+ 2,42 Ghz
Video: NVidia GeForce 7950GX2
HardDrive: 2*250GB 7200rpm
Memory: 2GB DDR2
Power: 550 Watt
Hope you can help me!
Thx
-
-
MSI x58 Pro
First of all, this is a freaking awesome thread! Great information here. Thanks to all!
I'm looking for a little help. I want to build a system similar to reinehc, except with the MSI x58 Pro motherboard (it's cheaper). I noticed that the Platinum board was recommended, but not the Pro. Is there a reason for this? Has anyone had any success with the Pro board? Are there any guides available for the Pro?
I'm a noob to all this, so any help would be greatly appreciated. Thanks.
-
ASUS P5QPL-VM....will it work?
I have specked out the following machine for a 10.5.6 box for running plex/eyetv...
Asus P5QPL-VM Motherboard
Intel Core 2 Duo E7400 Wolfdale 2.8GHz 3MB L2 Cache LGA 775 65W Dual-Core Processor
mushkin 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1000 (PC2 8000) Dual Channel Kit Desktop Memory
ASUS Hybrid TV Card My Cinema-ES3-100/NAQ/FM/AV/RC PCI-Express x1 Interface
Any advice on if this will work? I looked on the HCL and didn't see it.
If this board isn't very compatable, could someone suggest a micro ATX board with HDMI onboard & a tv tuner card?
Thanks a lot everyone...going to build this box this week hopefully.
Last edited by quaid821; 05-11-2009 at 12:18 AM.
-
-
Thanks for the great thread!
Here is my build, but I am still lost as to which video card. Any suggestion for the best compatibility and performance for ~$75?? I've looked ant the HCL and googled... still unsure which would be best.
Gigabyte GA-EP45-UD3P
Core 2 Duo 3.16 E8500
4 Gigs DDR2
-

Originally Posted by
reinehc
So I followed the recommended hardware setup ( the newest one)
This is what I have:
Motherboard: Gigabyte GA-EX58-UD5
Processor: Intel Core i7 920
Video: EVGA 9800 GTX+
Hard Drive: 2x 500GB 7200 rpm
Memory: 6GB RAM DDR3
Power Supply 750
DVDRW Serial ATA
Everything is up and running and seems great. Just wondering if anyone else has built this system and what their geekbench score was...
Mine is: 9696
Does that sound about right or is it slow for this build?? Maybe I've installed something incorrectly, although everything is working and showing up properly?
If you could direct me to the information you used to get a proper installation done on your i7, I would be extremely grateful.
I've been searching here for 30+ minutes and even resorted to a domain limited google search and just can't figure out what distro of osx86 I should be using.
I've tried iDeneb and although it installs, it can not boot.
-
-
Hi, any ideas om using a gigabyte ga-73pvm-s2h motherboard in a hackintosh with a E5200 cpu? Would like to use the on board graphics and firewire.
Searcher the forum but didn't get any hits. Pleas direct me if there is any info.
/KN
-
Hackint0sh Moderator
Array
Beta did you check the HCL? whats the video onboard?
HP Pavilion Elite m9250f
Snow Leopard 10.6.6, Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) -
How to Install -
Blog -
Hardware Combos -
FAQ by TJ2K7 Macbook Pro 13" iPhone 4
Follow meh:
@icchansan If you just want to support hackint0sh.org with a donation click here 
-
Similar Threads
-
By hackint0sh in forum Latest Headlines
Replies: 0
Last Post: 09-05-2009, 12:10 AM
-
By hackint0sh in forum Latest Headlines
Replies: 0
Last Post: 01-07-2009, 08:20 PM
-
By hackint0sh in forum Latest Headlines
Replies: 0
Last Post: 09-09-2008, 07:10 AM
-
By hackint0sh in forum Latest Headlines
Replies: 0
Last Post: 05-22-2008, 06:20 PM
-
By netsrack in forum iPhone "2G" (Rev. 1)
Replies: 1
Last Post: 11-21-2007, 12:47 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks