Page 13 of 30 FirstFirst ... 34567891011121314151617181920212223 ... LastLast
Results 121 to 130 of 295
Discuss [Video/TV Output][Effort] Building your own cable and patch IAP at the Hardware - Hackint0sh.org; had a search around apparently an adapter is coming beginning of september for my needs...
  1. #121
    Senior Professional Array

    Join Date
    Jul 2008
    Posts
    147
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    13

    Default

    had a search around apparently an adapter is coming beginning of september for my needs


  2. #122
    Newbie Array

    Join Date
    Aug 2008
    Posts
    7
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Did you pissed off the power's that be?
    Iphone 1.1.2 (OOT) => 2.0.2 Running on MTN in Ghana (West Africa)

  3. #123
    Newbie Array

    Join Date
    Aug 2008
    Posts
    2
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Today, I had been patched another portion of firmware, it's not IAPD.

    It works perfectly with only simple connection of audio ground and composite pin with 1K ohm resistor of accesory indicator. Of course it works for old version video cable.

    According to answer for "Display on TV?", it displays video to ipod or TV until reboot.

    There are no nag message of "It's not made for ipod....." nor quiting after several seconds.

    After some beta testing with my friend, I'll post it. ^^
    Last edited by freedoct; 09-07-2008 at 04:57 AM.

  4. #124
    Advanced Array

    Join Date
    Jan 2008
    Posts
    40
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    news? i cant wait to try this mod myself..

  5. #125
    Advanced Array

    Join Date
    Jun 2008
    Posts
    31
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    one hundred and twenty four posts, over eleven months but finally I can say

    I have a Beta patch!

    I say beta becuase I thought it to be fine, but between apparently burning my serial port (from connectiong it striaght to my computer) (i dont know if i have actually - cause i can still read from the iphone, and if i fryed the controller the whole port shouldnt work...) and working on sending raw HCI commands to the Bluecore 6-ROM Bluetooth chip, I dont know whats happening anymore.

    (yes i am actually working on patching bt next, btw any info drop us a line on david , which is the account name, to the domain: villagepublishing.com.au [guess where the '@' goes... ])

    So anyway, being the tempremental little bitch the iphone is, once i have played a video without the cable in, and plug the cable in it doesnt output to TV, i have to GDB the process, and do something I did like 6 months ago

    DO NOT BE ALARMED, A RESTORE WILL PROBABLY FIX THIS,

    but in light of this, i will not release a patcher file, but rather call on two (2) Beta testers.

    You must surfice all these requirements:

    1. (optional) have an iPhone 3G AND dock (NOT THE UNIVERSAL ONE, the iphone 3G one)

    2. an iphone 3G running 2.1

    3. a non-apple certified cable that, when you plug it in says "this accessory is not made to work for iphone would you like to turn on airplane blah blah blah (if i see that msg one more i will throw my iph @ a wall )

    4. (optional) a home made tv-out cable that says the same msg when plugged in

    happy β testing!

    ps β testers will get a new iapd file, not the patcher file.


  6. #126
    Supporter Array jeffdak's Avatar

    Join Date
    Aug 2007
    Location
    Ecuador
    Posts
    239
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    19

    Default

    Would you post the schematick for the homemade tv-out cable?

    thx in advance
    Iphone 8Gb unlocked (3 of them, old versions all)
    Thanks Dev(dream) team

  7. #127
    Advanced Array

    Join Date
    Jun 2008
    Posts
    31
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    i dont know it - my cable (ebay fake) has a freakin chip in it it self, but im pretty sure it is trying to minic apple (but obviously fails) im pretty sure the old iPOD cables will work - and hence you could follow their schematic (you just need the right value resistor (tv out value is iduuno...?) on the ipod accessory pin)

    any beta testers...?

  8. #128
    Rookie Array

    Join Date
    Sep 2008
    Posts
    10
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default Beta Testers

    Hello,

    I would be happy to do some beta testing for you. I have an iPod touch with a homemade dock (currently audio and battery charging work, but there are obviously no video signals). I am running jailbroken firmware 2.1, and am familiar with and comfortable about the risks hacking the iPod. Unfortunately, I don't have a commercial (non-Apple) cable.

    Cheers
    Last edited by thebigone; 09-19-2008 at 06:57 PM.

  9. #129
    Rookie Array

    Join Date
    Sep 2008
    Posts
    10
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    @bigfishman

    Charging is relatively simple to do - you just need to provide a voltage over the two USB data pins to signal the iPod to actually accept the input voltage. Use a voltage divider with relatively high value resistors (I used 1M IIRC) to cut the 5V input voltage down to about 2.5v, and plug both USB data pins to this. You can then put 5V power at the USB Power pin, and GND to USB GND, and it will start to charge.

    Note that on my tests, I used a 5v voltage regulator (1A max) plugged into a wall wart to provide me with the power. I need to check current, but the regulator seemed to get a bit hot after about 30 seconds, which makes me think it is pulling all available current. Tonight I will check what current is passing through, and perhaps put in a series resistor to bump it down to the USB standard of about 500mA or so.

    Of course, the standard disclaimers apply: this worked for me, but may blow up your iPod, do this at your own risk, etc etc etc.

    I can post a schematic if my description is not sufficient.

    Cheers

  10. #130
    Senior Professional Array

    Join Date
    Jul 2008
    Posts
    147
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    13

    Default

    thats for your description a schematic would be superb. thanks


 

 

LinkBacks (?)

  1. 05-14-2012, 09:45 PM
  2. 03-08-2010, 04:22 AM

Similar Threads

  1. TV Output patch on ipod touch 2g dont work
    By fedegil69 in forum Hardware
    Replies: 0
    Last Post: 04-26-2009, 04:19 PM
  2. MacNN: Scosche debuts iPhone audio/video output cable
    By hackint0sh in forum Latest Headlines
    Replies: 0
    Last Post: 01-29-2009, 05:20 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 03:09 PM.
twitter, follow us!