1.1.2 OOB

Cut everything like planned, only very difficult to insert

finally got it in and F**CK, can't get it out anymore.

Of course, no sim recognized.

Help, I'm begging you.

First, remain calm or otherwise you'll do silly things and damage your phone (been there).
The best way to get it out is to use a thumbtack or similar, insert it into the hole and gently push and wiggle the tray out. Just make sure you're applying enough pressure; preferably hold the phone in both hands and push it against your desk (with the thumbtack in the hole and between the phone and your desk, obviously). Works every time for me.

Use one of these bad boys, with the smallest drill-bit

Got it. Had to damage the case a little bit though.

Apparently, the turbosim was crooked ?!? good thing i had 2

Now my phone works, but i can't dial anything, only calling from my favorites and don't get a ring when someone calls

oh well

what country are you in?

Originally Posted by Thermoboy

Got it. Had to damage the case a little bit though.

Apparently, the turbosim was crooked ?!? good thing i had 2

Now my phone works, but i can't dial anything, only calling from my favorites and don't get a ring when someone calls

oh well

did you install and run iWorld ?

Hi guys.

I'm in Reunion Island (French island in the Indian Ocean) - carrier : Orange

iWorld fixed everything, thanks for your great support (french forum suck...)

just happen the same to me and I have tried clips, thumbtacks, a small scissor...nothing works...I just order iphone tools so I can open it up but since the simtray can not be remove and all guides say that it is the first thing to remove to open up the iphone I do not know what to do. I can not bring it to an apple store to get it repair right?

Originally Posted by jgfrugone

just happen the same to me and I have tried clips, thumbtacks, a small scissor...nothing works...I just order iphone tools so I can open it up but since the simtray can not be remove and all guides say that it is the first thing to remove to open up the iphone I do not know what to do. I can not bring it to an apple store to get it repair right?

OK Relax.

You do need a Thumbtack as someone else suggested - or something thin AND strong AND easy to push HARD.

But, we found that at the same time as PUSHING something in the release hole - you should try and hold the combined SIMs IN against the SIM Tray. (So you don't break / damage the piggy-back SIM device or the chip mounted on it.

We found that a VERY THIN mechanics BRASS feeler gauge worked very well for this.

We first had this problem with week 47+ iPhones and 2nd Generation devices and early HyperSIMs.

No problems anymore with 3rd and 4th generation devices.

A3 Australia

To make sure that ur turbo sim is properly inserted just put double adhesive tape behind the sim and the frame.cute a small piece of tape and stick both ends of ur sim and Turbosim to make it more stable.i've en-counter same probs.before.