Page 2 of 7 FirstFirst 1234567 LastLast
Results 11 to 20 of 67
Discuss iPhone Hacking in a Nutshell --- [iLiberty 1.1.4] (PWNED: coming soon) at the Genius Bar - HowTos, Guides and Tutorials - Hackint0sh.org; Originally Posted by Locked The corruption occurred to part of the seczone not the secpack. ...
  1. #11
    J to the T. Shaken, not Stirred Array thecompkid's Avatar

    Join Date
    Jul 2007
    Posts
    1,152
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    75

    Default

    Quote Originally Posted by Locked View Post
    The corruption occurred to part of the seczone not the secpack. The secpack is the password to the bootloader that lets you write to the baseband.
    Ok thanks. Ill be sure to correct that later. Postin from my iPhone right now .


  2. #12
    Professional Array

    Join Date
    Nov 2007
    Posts
    70
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default

    Quote Originally Posted by thecompkid View Post
    Ok thanks. Ill be sure to correct that later. Postin from my iPhone right now .
    Dude. You make me jealous. I am getting mine for Christmas assuming 1.1.2 is figured out along with the bootloader. I just hope they don't release another "fix" between now and then. I know on the wiki they said they are close, but I dont know if that includes the new bootloader.

  3. #13
    J to the T. Shaken, not Stirred Array thecompkid's Avatar

    Join Date
    Jul 2007
    Posts
    1,152
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    75

    Default

    Quote Originally Posted by Sesheron View Post
    Dude. You make me jealous. I am getting mine for Christmas assuming 1.1.2 is figured out along with the bootloader. I just hope they don't release another "fix" between now and then. I know on the wiki they said they are close, but I dont know if that includes the new bootloader.
    Welcome, dude. You're coming into the community at a great time seeing as how Apple is releasing the official SDK in February. Believe me, you're not going to regret it, the iPhone is no ordinary phone.

    Just remember, you can only purchase up to two iPhones using a credit card, no cash or gift cards(!), because Apple is intent on maintaining its control over the market. (They do it to stop heavy resellers)

  4. #14
    Professional Array

    Join Date
    Oct 2007
    Posts
    60
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default

    i have the serial # of death listed here (its a replacement week 40 iPhone, my old week 30 worked flawlessly) and it suffers from the negative black issue.

  5. #15
    J to the T. Shaken, not Stirred Array thecompkid's Avatar

    Join Date
    Jul 2007
    Posts
    1,152
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    75

    Default

    Quote Originally Posted by brand1130 View Post
    i have the serial # of death listed here (its a replacement week 40 iPhone, my old week 30 worked flawlessly) and it suffers from the negative black issue.
    If you are suffering from the negative black issue, then you should be able to get a replacement. I am pretty sure at this point that it has little if anything to do with the LCD panel ID. Bring it in and see what they say. Realize that you paid good money for a product that is flawed, because the first thing they are going to tell you is that they see nothing wrong. Just be persistent and they will eventually help you out.


  6. #16
    Senior Professional Array ag_oo7's Avatar

    Join Date
    Oct 2007
    Posts
    474
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    I purchased an unlocked 1.0.2 version from china. I did upgrade to 1.1.1 by mistake and phone get locked. After downgrading to 1.0.2 according to instruction here:
    http://www.hacktheiphone.com/111/iph...1_windows.html
    and unlocking using anysim1.1, I realised the seczone is not corrupted and my IMEI hasn't changed. Now I am too scared to upgrade to 1.1.1 again since I tried every trick when it was on 1.1.1 and coudn't unlock it using 1.1.1 OTB Dev team method and decided to downgrade and unlock. Why upgrading to 1.1.1 by mistake didn't corrupted my seczone and why 1.1.1 OTB method didn't worked for me then?

    What should I do now to upgrade it to 1.1.2 and do I need virginize and then upgrade or don't need virginizing?
    Last edited by ag_oo7; 11-24-2007 at 07:22 AM.

  7. #17
    Professional Array

    Join Date
    Apr 2007
    Posts
    60
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    11

    Default

    SRSL WTF?!?!!? I was laughing my ass of when i read that and emagined some pretty girl trying to "haxx0r" her iPhone. You are so funny man! Anyway, great guide. Rep+
    Light is a beautiful thing

  8. #18
    Newbie Array

    Join Date
    Nov 2007
    Posts
    1
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default Must be the dumbest question ever!

    I have an iPhone which was unlocked by a company on Ebay. The version firmware is 1.0.2 but the modem firmware is 04.01.13_G.

    The little I know is that one should jailbreak the phone BEFORE unlocking. Does this mean I shouldn't use something like AppSnapp on my already unlocked iPhone because I got it all backwards?

  9. #19
    Advanced Array

    Join Date
    Mar 2007
    Posts
    31
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Are phones purchased from the Apple store *right now* with 1.1.2 still jailbreakable? i.e. can you still downgrade to 1.1.1, jailbreak, OctoPrep, update, jailbreak again?

    People keep making ominous references to the bootloader changing but there is no discussion of how this is significant.

  10. #20
    Board Hero Array lordofdaflies's Avatar

    Join Date
    Dec 2007
    Location
    INDIA
    Posts
    1,134
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    76

    Default

    Upgrade a 1.0.2 to 1.1.1


    My phone is already unlocked - can i update to 1.1.1?

    Not straight away! The old unlock software's (before anySIM 1.1, except iphonesimfree.com's software) had serious flaws, making the phone unusable in later firmware. Before you update your phone you will need to repair your phone by "virginizing" the phone (baseband) firmware. Below are the ultrasimple instructions

    How to "Virginize" an unlocked phone before update to 1.1.1
    Ignore all long and complex tutorials - I have set up a fully automatic script that will repair the phone so that you can upgrade it.
    1. Set Settings → General → Auto Lock → Never
    2. Make sure Modem firmware is 03.14.08_G. Check this in Settings → General → About.
    3. Start Installer and update it if it asks. Tap on Sources, Edit, and Add http://i.unlock.no/ as a repository.
    4. Make sure you have BSD Subsystem installed, if not, go to System category and install it.
    5. Now, install The Virginizer found in the Unlocking Tools category. This will take about 10 minutes to complete.

    Unlock your iPhone for free - no computer necessary!
    First, thanks to everyone who made this possible. Iphone Dev team who made the sim-unlock application used in the tutorial, Installer.app team, geohot, Iphonesimfree and all others. No need to disassemble your phone anymore, and no need to input commands manually.
    Warning! Firmware version 1.1.2 is now released. If you bought a phone that had 1.1.2 preinstalled (it shows a picture of a cable and the iTunes icon), it is not possible to unlock it. If you did not have this firmware when you bought the phone, i do not recomment to update to this version yet. It's very important that you don't let iTunes restore to 1.1.2 as well, so always select firmware manually by holding Shift/Option key while clicking Restore. Details about restoring/upgrading here.
    This tutorial assumes that your iPhone has firmware version 1.1.1. If you are unsure, here is how to check: On the emergency dial screen dial *3001#12345#* and tap Versions. Firware version should be 04.01.13_G. If it's 03.14.08_G you have v1.0.2 and need to update it to 1.1.1 first. Read here first if you previously unlocked your phone.
    NEW! If you have an unlocked 1.0.2 iPhone, or upgraded to 1.1.1 and have "damaged" imei (0049) you need to repair your phone. I have now put together the ultimate repair solution - this is the absolutely easiest way to repair the phones (virginize). To do so, just add http://i.unlock.no/ as a Source in Installer, make sure BSD Subsystem is installed (else it's in the System category) and install The Virginizer found in the Unlocking Tools category. There's two versions, use the one corresponding to your Modem firmware. Click here for more details. And remember, you got it here first!
    ________________________________________
    Bypass activation and prepare phone for software installation
    1. Make sure you have a SIM-card with PIN turned off, and power on your phone (the supplied AT&T card works fine).
    2. On the activation screen, slide for emergency and dial: *#301# to make the phone call itself. (If the incoming call dialog quickly disappears but it keeps ringing, just dial 0 (remove *#301# first), and it will call itself)
    3. Answer the call, and tap on Hold
    4. Phone will call it self again, tap Decline. You will now be returned to the normal dialer.
    5. Tap on contacts, and tap the + icon to add a new. The only info you are going to add to this contact are two URL's. To add a URL, tap Add new URL. The first URL is prefs followed by a colon: prefs: and the second is jailbreakme.com. Tap Save.
    6. Your contact now has two "web pages" - tap on the first one (prefs. This will take you to the settings dialog. The reason you want this, is because you need to connect to a Wi-Fi network, so tap on Wi-Fi, and get connected to a network, and make sure the icon on top of the screen is indicating that you are connected. While you are in the settings dialog, you should also set: General → Auto-Lock → Never.
    7. Now, press the home button, and again, slide for emergency dial 0, Answer the call, Hold and Decline the new call so that you get to the contacts. Tap on your contact (No Name), and this time tap on the other home page, jailbreakme.com
    8. Safari will launch and show you a webpage. Read through the text, before you Install AppSnapp
    9. Phone will return to activation screen, but don't panic, just wait.
    10. Phone should automaticly restart after almost a minute. . If it does not restart withing 2 minutes, click here.
    11. When the phone starts again, it should no longer say slide for emergency, but rather Slide to unlock It means it was successfull! Activation is now bypassed, and phone prepared for software installation! (If you are going to use an AT&T SIM, you won't need to do the next step.)

    Unlock the SIM-lock
    1. Open installer, and install the update if prompted.
    2. Go to sources and tap Edit and Add
    3. Add this URL: http://i.unlock.no
    4. Tap Done and then Refresh
    5. Go to Install (at bottom) and scroll down to the Unlocking Tools category and install AnySIM
    6. When installed you can press the home button, and you will find a new AnySIM icon on your home screen. Launch it and follow the instructions.
    7. The unlocking process will take about 5-10 minutes, in the end it should say it was successful!
    8. To clean up your phone, launch Installer and uninstall AnySIM. Then go to Settings → General → Auto-Lock and set it to a prefered value.
    Congratulations, you are done!

    A few tweaks
    If you want to enable the International menu, install Enable International menu which is found in the Unlocking Tools category. This will let you choose keyboards, and set your phone to use your prefered regional settings, like date and phone number formatting. Be alerted though - it looks like Apple haven't finished this feature completely yet (which is probably why it's deactivated) so there may be some issues. In my case Fahrenheit and Celsius is mixed up in the Weather application for instance!
    By default, the EDGE settings found in Settings → General → Network → EDGE are not saved when phone is restarted. To fix this, install EDGE Settings fix which is found in the Unlocking Tools category..
    If YouTube does not work ("You must first connect to iTunes..."), try to install YouTube activation which is found in the Unlocking Tools category. Also make sure that the phone has correct date.
    If you for some reason need to deliver your phone to Apple (service etc.), i recommend that you revert the unlock first so that they (hopefully) can't see it's been unlocked. Install OneSIM which is found in the Unlocking Tools category, and tap on the new icon it creates to run it. After you are done, do a restore in iTunes.


 

 
Page 2 of 7 FirstFirst 1234567 LastLast

LinkBacks (?)

  1. 02-04-2009, 02:38 PM

Similar Threads

  1. downgrade 3GS 4.1 pwned to 4.0.1 pwned
    By tschensie in forum PwnageTool
    Replies: 2
    Last Post: 11-10-2010, 09:47 PM
  2. Replies: 0
    Last Post: 07-19-2008, 05:40 PM
  3. [pwned] dead at pwned reloaded
    By gnomo in forum iPod Touch 1G
    Replies: 17
    Last Post: 04-19-2008, 04:14 PM
  4. Should I use iLiberty now or wait for PWNED?
    By jbloggs in forum General
    Replies: 12
    Last Post: 04-12-2008, 07:03 PM
  5. [iLiberty+] What are the fixes/enhancements in iLiberty+ 1.3?
    By jbloggs in forum iPhone "2G" (Rev. 1)
    Replies: 8
    Last Post: 04-09-2008, 07:37 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 09:21 AM.
twitter, follow us!