Page 1 of 2 12 LastLast
Results 1 to 10 of 13
Discuss NO Service - After Unlock at the General - Hackint0sh.org; Hi all, After doing HW & Software Unlock & Activation (Using T-mobile usa sim) I ...
  1. #1
    Rookie Array

    Join Date
    Sep 2007
    Posts
    25
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Question NO Service - After Unlock

    Hi all,

    After doing HW & Software Unlock & Activation (Using T-mobile usa sim) I am still not able to use phone.

    All I get is "no service" showing up in the upper left corner.
    Settings - Carrier leads to Automatic/Manual. No Network name shows up.

    When I select Manual, I get "Network lost - Your selected network is no longer available. You can choose a new network in the phone settings."

    When powering off & on again, I get some bars (showing no signal) on the top left. Then a message pops up "Waiting for AT&T activation - This may take some time".

    Things like WLAN work perfectly.

    I am 100% sure the phone is Unlocked & Activated b/c I unlocked a 2nd phone using the same procedure.

    Infact when I insert my Sim and I have a voicemail waiting, the red message button appears on the phone button, but the singal strength bar changes from 0 bars (No Signa) to the "No Service" message on the top left corner of the phone.

    Anyone any idea, please.. I cannot find a way out. Restored Firmware (1.0.2) a few times and activated again. But seems like no chance.. Help :-(

    Thanks!!



  2. #2
    Newbie Array

    Join Date
    Sep 2007
    Posts
    9
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    I am having the exact same problem. I can restore in iTunes and reactivate and it doesn't complain about my TMobile US sim card, but shows No Service at the top.

  3. #3
    Professional Array

    Join Date
    Sep 2007
    Posts
    63
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default

    Did you guys remember to restart commcenter that you shut down before the unlock?

    launchctl load -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist

  4. #4
    Newbie Array

    Join Date
    Sep 2007
    Posts
    9
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    I did restart mine.

  5. #5
    Rookie Array

    Join Date
    Sep 2007
    Posts
    25
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by Traveller View Post
    Did you guys remember to restart commcenter that you shut down before the unlock?

    launchctl load -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist
    Yes!! Restarted CommCenter


  6. #6
    Rookie Array

    Join Date
    Sep 2007
    Posts
    19
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    had done 6 using free software unlock ..

    only one have this problem ... and tried restore and re-unlock, same thing ....

    anyone??

  7. #7
    Newbie Array

    Join Date
    Sep 2007
    Posts
    9
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    This was posted in another thread, but I'm not sure exactly what he means.
    Well, a bit more digging and I appear to have solved it, at least for my specific problem.... I can't be sure if this applies for anybody else....

    I noticed that my EEP file version was off compared to some of the other information out there, so I grabbed the modem firmware's corresponding EEP file out of the firmware image (ICE3.14.08_G.eep in my case), uploaded it to the iPhone and then ran "bbupdater -e" with the EEP file name to update the EEP file properly.

    As soon as I brought CommCenter back online, I had service, just like that.

    I'm thinking in my case that the rollback and restore must have never properly updated the EEP file back to the 3.14.08 version.

  8. #8
    Rookie Array

    Join Date
    Sep 2007
    Posts
    14
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    i have the same problem. how can i COMPLETELY restore the iphone??

  9. #9
    Rookie Array

    Join Date
    Sep 2007
    Posts
    25
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Has anybody found a solution to this issue?

  10. #10
    Newbie Array

    Join Date
    Sep 2007
    Posts
    5
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default same here

    I have the same problem. I have unlocked like 5 phones, but I have one phone that is not unlocking. I've tried everything: hardware unlock with needles, new free software unlock - nothing helps. Tried to reflash the baseband, to fully restore, tried like 5 times on PC and 5 times on Mac, from the beginning, with the new iTunes, with old iTunes, nothing helps - not hardware, not software. Everything goes perfect, just like in the instruction, but everything stucks on the last commands in minicom:

    AT+CLCK="PN",0,"00000000"

    gives me an ERROR

    and AT+CLCK="PN",2 gives me 1 instead of 0.

    I've tried to exit minicom, to load and unload commcenter, tried to run bbupdater -v again, I've tried the whole process with the SIM card and without it. Nothing helps.

    I saw a couple of people with the same problem here and on the IRC channel. But PRO people aren't willing to help us, probably they think we make some mistake during the process, but I'm a 100% sure there is some problem with some phones, it's hardlocked or something like that... I will really appreciate if somebody can help me...

    What is really sad is that 5 phones I've already unlocked was for my friends, and my own phone is like this, I can't unlock it. Already lost like 5 days fighting with it. Used all guides, steps, tips and tricks from all the instructions, forums, google and nothing helps... Literally every published tip has been used: lockdownd is on it's place, attributes are right, activated the right way, using files from the right firmware, but........ :-(

    One of this 5 phones I unlocked also gave me an ERROR with AT+CLCK="PN",0,"00000000" command, but next command gave me 0 and phone works perfectly. But my phone is just not unlocking... I've almost lost any hope...

    I've also tried new GUI unlock, it says complete and enjoy, but it doesn't work: no signal, no carrier menu. Tried to re-start. Tried to do it with SIM card and without SIM card. PIN-lock is disabled on the SIM-card. Tried to restore phone with iTunes completley, activated phone with independence, installed unlock - didn't work. Tried to activate it with iBrickr too - same thing. Running app with "auto-lock: never".

    IMEI number in the software is the same like in the box, so it was not changed by any software.

    Maybe somebody had the same problem and finally found a solution to it? Please post it here!


 

 
Page 1 of 2 12 LastLast

Similar Threads

  1. [1.1.2 OTB] After unlock I've got No service
    By dinamicart in forum iPhone "2G" (Rev. 1)
    Replies: 8
    Last Post: 02-17-2008, 04:56 PM
  2. [1.1.2 OTB][HW unlock] No service
    By chmielu in forum iPhone "2G" (Rev. 1)
    Replies: 16
    Last Post: 02-01-2008, 02:21 PM
  3. no service/unlock
    By sosa66633 in forum iPhone "2G" (Rev. 1)
    Replies: 2
    Last Post: 11-02-2007, 04:29 AM
  4. Replies: 4
    Last Post: 09-25-2007, 05:35 PM
  5. after unlock say no service
    By jmsb76 in forum General
    Replies: 0
    Last Post: 09-17-2007, 01:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 05:08 AM.
twitter, follow us!