well i will post the this method using Orion007 method for upload file to baseband:

when you have NO SERVICE and u have a succesfully unlock follow this:

1 first unload commcenter with this command
launchctl unload -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist

2.enter to minicom and type
AT+CLCK="PN",0,"00000000"
it say error.... is OK!!

3.type AT+CLCK="PN",2 it say 0, (this show u have unlocked iphone)

4. run bbupdater -v

5.upload to the baseband this file ICE03.14.08_G.eep using this command
bbupdater -e ICE03.14.08_G.eep

6.restart the iphone and load the commcenter with this command
launchctl load -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist

7.enjoy your unbricked iphone!!!... and unlocked of course!

the link: http://davedave85.blogspot.com/

i forget, i test it with 2 iphone one software unlock and the another hardware unlock the both succesfully unbricked, and more ppl into irc can fix it.
i hope it can fix you bricked iphone

where do you get the .eep file?

i cant post it because is copyright files, but i can have from your firmware
into your firmware u need to do this step for have the file

dd if=694-5259-38.dmg of=ramdisk.dmg bs=512 skip=4 conv=sync

then mount ramdisk.dmg and navigate for search the file.

i dont remember if 694-5259-38.dmg if the right file but into the image u have two files try both ; D

You get the .eep file from the apple 1.0.2 full restore image. There are many tutorial around for mounting the image and getting files out of it. Just find that .eep file and reflash the baseband eeprom and you should be all set. I know there were several phones that were unbricked last night using this method. This will fix bricked phones that used the SW or HW unlock.

Ive tried this but i get the following error:

# bbupdater -e ICE03.14.08_G.eep
Preparing to flash using /dev/tty.baseband at 750000 baud
Please reset target
Resetting target...
Retry attempt 1
Resetting target...
Retry attempt 2
Resetting target...
Retry attempt 3
Resetting target...
Retry attempt 4
Resetting target...
Retry attempt 5
Resetting target...
Retry attempt 6
Resetting target...
Retry attempt 7
Resetting target...
Retry attempt 8
Resetting target...
Retry attempt 9
Resetting target...
Retry attempt 10
Error: Baseband bootloader is too old; update to 1.8 or later and try again


Any suggestion?

yes i have the same issue, i do this...
bbupdater -f ICE03.14.08_G.fls (it locks again the iphone)
restore....
when u have the screen activation with the world back and it say incorrect sim but u have the at&t sim dont worry, activate it and do all the steps for unlock it again...

when u have it unlocked
follow the guide unbricked iphone

and thats all.... ; D

Originally Posted by dave1985

well i will post the this method using Orion007 method for upload file to baseband:

when you have NO SERVICE and u have a succesfully unlock follow this:

1 first unload commcenter with this command
launchctl unload -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist

2.enter to minicom and type
AT+CLCK="PN",0,"00000000"
it say error.... is OK!!

3.type AT+CLCK="PN",2 it say 0, (this show u have unlocked iphone)

4. run bbupdater -v

5.upload to the baseband this file ICE03.14.08_G.eep using this command
bbupdater -e ICE03.14.08_G.eep

6.restart the iphone and load the commcenter with this command
launchctl load -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist

7.enjoy your unbricked iphone!!!... and unlocked of course!

the link: http://davedave85.blogspot.com/

Didn't work for me, any idea ?

Error performing request
No Network Service

ehem.. what the hell is "the Orion007 method"???

can you explain it a bit better?

tnx in advance...