Results 1 to 5 of 5
Discuss Iphone Unbricked Method at the General - Hackint0sh.org; Got this from http://www.djjeffa.com/vb/showthread.php?t=10201 some guy on this forum claims that he got around the ...
  1. #1
    Professional Array

    Join Date
    Sep 2007
    Posts
    75
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    11

    Default Iphone Unbricked Method

    Got this from http://www.djjeffa.com/vb/showthread.php?t=10201 some guy on this forum claims that he got around the baseband problem that we are all having by following the method below


    well, i will post the step.. it work for SOFTWARE and HARDWARE BRICK, it work for me and another ppl using Orion007 method for upload file to baseband.

    when you have NO SERVICE and u have a succesfully unlock follow this:



    for request of the people download link: http://rapidshare.com/files/55123388/eepfiles.zip.html

    be carefull, file 3.12 is for firmware 1.0.0 and 3.14 for firmware 1.0.1 and 1.0.2
    u need to use the file who correspond to your firmware.



    1 first unload commcenter with this command
    launchctl unload -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist

    2.enter to minicom and type
    AT+CLCK="PN",0,"00000000"
    it say error.... is OK!!

    3.type AT+CLCK="PN",2 it say 0, (this show u have unlocked iphone)

    4. run bbupdater -v

    5.upload to the baseband this file ICE03.14.08_G.eep using this command
    bbupdater -e ICE03.14.08_G.eep

    6.restart the iphone and load the commcenter with this command
    launchctl load -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist

    7.enjoy your unbricked iphone!!!... and unlocked of course!


    Orion007 Pd: You get the .eep file from the apple 1.0.2 full restore image



    pd2: if u have this error

    Error: Baseband bootloader is too old; update to 1.8 or later and try again

    follow this step:
    bbupdater -f ICE03.14.08_G.fls (it locks again the iphone)
    restore....
    when u have the screen activation with the world back and it say incorrect sim but u have the at&t sim dont worry, activate it and do all the steps for unlock it again...

    when u have it unlocked
    follow the guide unbricked iphone

    IF U DONT HAVE THIS ERROR DONT UPLOAD THE FLS BECAUSE IT LOCK THE IPHONE AGAIN.

    and ppl remember LOAD THE COMMCENTER if u dont do it u NEVER have signal even is u reboot the iphone u need to load because it dont load automatically.


    THANKS TO THE DEV TEAM, GEOHOT, ORION007 AND ALL THE PEOPLE IN UNDERNET #IPHONE.UNLOCK



  2. #2
    Newbie Array

    Join Date
    Sep 2007
    Posts
    8
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    after part 4 I get the following error:

    =====================================
    # bbupdater -e ICE03.14.08_G.eep
    Preparing to flash using /dev/tty.baseband at 750000 baud
    Please reset target
    Resetting target...
    ProcessDetailUpdated: Boot-loader is active
    ProcessDetailUpdated: EBL version: 3.9_M3S2 3..9
    ProcessDetailUpdated: Boot mode is: CC
    ProcessDetailUpdated: Baud rate set to 750000
    ProcessDetailUpdated: Get flash id.
    ProcessDetailUpdated: CFI stage 1
    ProcessDetailUpdated: Flash ID is: 88620089
    ProcessDetailUpdated: CFI stage 2
    ProcessDetailUpdated: Boot process finished
    ProcessOutlineUpdated: Reading SW version data
    Error: couldn't retrieve version information: File not found.
    Upgrade from

    Downloading EEP
    ProcessOutlineUpdated: Start downloading from file ICE03.14.08_G.eep.
    ProcessDetailUpdated: Sending sec-pack.
    ProcessDetailUpdated: Load region 0
    ProcessDetailUpdated: Sending end-pack.
    ProcessDetailUpdated: Checksum OK.
    ProcessDetailUpdated: Verify OK
    ProcessOutlineUpdated: Process time was 1787 msec.
    Resetting target...
    Done
    #
    =====================================

    Please help!

  3. #3
    Advanced Array

    Join Date
    Sep 2007
    Posts
    39
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    My iPhone is unlocked and working, but I have "no wi-fi" issue. A tried to make bbupdater -e ICE03.14.08_G.eep, but it gave me "Error: Baseband bootloader is too old...". So how do you think - will full restore with unbricking by this method then help me to restore wi-fi? And I tried to launch minicom trough mobileterminal, but it gives me nothing on my AT commands, but it gave ok on his own first long command.

  4. #4
    Rookie Array

    Join Date
    Aug 2007
    Posts
    12
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Exclamation

    I got the same error:
    # ./bbupdater -e ICE03.14.08_G.eep
    Preparing to flash using /dev/tty.baseband at 750000 baud
    Please reset target
    Resetting target...
    ProcessDetailUpdated: Boot-loader is active
    ProcessDetailUpdated: EBL version: 3.9_M3S2 3..9
    ProcessDetailUpdated: Boot mode is: CC
    ProcessDetailUpdated: Baud rate set to 750000
    ProcessDetailUpdated: Get flash id.
    ProcessDetailUpdated: CFI stage 1
    ProcessDetailUpdated: Flash ID is: 88620089
    ProcessDetailUpdated: CFI stage 2
    ProcessDetailUpdated: Boot process finished
    ProcessOutlineUpdated: Reading SW version data
    Error: couldn't retrieve version information: File not found.
    Upgrade from ПЮ/ to ЛЩЪ/

    Downloading EEP
    ProcessOutlineUpdated: Start downloading from file ICE03.14.08_G.eep.
    ProcessDetailUpdated: Sending sec-pack.
    ProcessDetailUpdated: Load region 0
    ProcessDetailUpdated: Sending end-pack.
    ProcessDetailUpdated: Checksum OK.
    ProcessDetailUpdated: Verify OK
    ProcessOutlineUpdated: Process time was 1731 msec.
    Resetting target...
    Done
    #

    Any ideas ?

  5. #5
    Senior Professional Array

    Join Date
    Sep 2007
    Posts
    481
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    32

    Talking

    Hi guys, this is my first post. Just want to share something about the AT+CLCK="PN",0,"00000000" error.

    I unlock my phone using iUnlock when it was first released. I have the same error when I run that AT+CLCK="PN",0,"00000000" command and got a 0 when I ran the 2nd command AT+CLCK="PN",2.

    Even though it says no service.. all I did was that I restore my iphone and after restore, the phone was unlocked and fully functioning up till today.


    So, do I need to run the ICE03.14.08_G.eep file again? I really don't have any problem with my iphone now but would like to correct anything not done correctly the first time.


 

 

Similar Threads

  1. Can the iPhone 4 be unbricked?
    By RudeBoi in forum iOS 4.x (iPhone OS 4.x)
    Replies: 1
    Last Post: 08-20-2011, 07:01 PM
  2. Confused between Unlocked and Unbricked
    By iphonehcs in forum Redsn0w
    Replies: 1
    Last Post: 10-29-2009, 05:54 PM
  3. [Input Method] (Chinese) handwriting input method for iPhone coming soon! Demo here
    By smoothdvd in forum Free Toolchain Software (Cydia App's)
    Replies: 5
    Last Post: 05-08-2008, 05:41 PM
  4. Iphone Unbricked Method (No Service)
    By dave1985 in forum General
    Replies: 29
    Last Post: 01-31-2008, 02:36 PM
  5. Iphone Unbricked Method (No Service)
    By dave1985 in forum General
    Replies: 3
    Last Post: 09-13-2007, 02:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 09:22 AM.
twitter, follow us!