Page 1 of 4 1234 LastLast
Results 1 to 10 of 31
Discuss how to ssh if i got no imei no iccid no wifi (=no ip)? please please please at the General - Hackint0sh.org; hi guys help needed. got a brick from a friend, dunno what he did. mistakes, ...
  1. #1
    Rookie Array

    Join Date
    Oct 2007
    Posts
    28
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default how to ssh if i got no imei no iccid no wifi (=no ip)? please please please

    hi guys

    help needed.

    got a brick from a friend, dunno what he did. mistakes, i think.

    no ip no wifi no imei no iccid nothing.

    i succeded to restore to 1.0.2 and to jailbreak

    i install ssh etc, but how can i get to the phone without the ip?

    i need to do a reset, to erase baseband...

    can you point me the steps, a giude or so?

    you guys rock

    db



  2. #2
    Rookie Array

    Join Date
    Oct 2007
    Posts
    28
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    strange.
    i manage to install appz (i.e. ssh) with ibrickr.. but then?

    how to get to ssh and to copy bbupdate to reset the thing?

    deep thanks, again.

    jj

  3. #3
    Professional Array

    Join Date
    Oct 2007
    Posts
    53
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    9

    Default

    Just an idea, take the password off of your wifi network, i noticed on mine when i messed something up with activation and it was only letting me dial emergency numbers it still got onto the wifi and I could ssh

  4. #4
    Rookie Array

    Join Date
    Oct 2007
    Posts
    28
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    thanks for your kind attention.

    too bad, i already checked with ipscanner and in the accesspoint's dhcp list and it'off the network

    in fact he says "repair needed"

  5. #5
    Rookie Array

    Join Date
    Oct 2007
    Posts
    28
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    ok guys. i did it.

    now i have a 1.0.2.
    a bit sluggish, but: jailbraked and activated.

    but...

    1. no sound, no imei, no iccid, no wifi. at all.
    2. i was thinking to do something with bbupdater and baseband but i dunno nothing about that. can you point some indications, please?
    at least, i'd like to end up with a touch since i payed 200€ for this brick...



  6. #6
    Rookie Array

    Join Date
    Aug 2007
    Posts
    18
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by dubmehard View Post
    ok guys. i did it.

    now i have a 1.0.2.
    a bit sluggish, but: jailbraked and activated.

    but...

    1. no sound, no imei, no iccid, no wifi. at all.
    2. i was thinking to do something with bbupdater and baseband but i dunno nothing about that. can you point some indications, please?
    at least, i'd like to end up with a touch since i payed 200 for this brick...

    ... I to hell had the same situation once ... I did the following and it worked like acharm:

    - install Mobile terminal + BinKit+BSD
    -Make sure to upload bbupdater+ieraser to usr/bin directory.
    - Use ibrickr to upload : ICE03.14.08_G.fls + ICE03.14.08_G.eep
    -chmod +x ieraser ,bbupdater using mobile terminal on iphone .
    ... etc

    finally erase the baseband and bbupdate it ...

    I did not go in details as I suppose u know what to do with my hints ...good luck

  7. #7
    Rookie Array

    Join Date
    Oct 2007
    Posts
    28
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    good evening my dear friend.
    thanks for your contributions, this is really a great achivement.

    i can follow up to the upload, then i'm lost
    sorry for the noobness,
    but can you point me somewhere to find the exact nix command to put?

    thanks

    db
    Last edited by dubmehard; 10-21-2007 at 08:13 PM.

  8. #8
    Rookie Array

    Join Date
    Oct 2007
    Posts
    28
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    should i follow this?

    --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    STEP 1
    To prepare, if you haven't already,
    - Download and install Apptap
    Click here for Apptap

    - winSCP (for communication and transfering file between iphone and your pc)
    CLick here to download WinSCP

    -Putty (To execute commands in your iphone from your pc)
    Click here to download Putty

    -Baseband (just remove the -)
    http://r-a-p-i-d-s-h-a-r-e.com/files...flash.rar.html

    Now You will need to install the following items in your iphone using Installer
    a) Community Services
    b) BSD Subsystem
    c) Open SSH

    Once done.

    STEP 2
    1. Connect to your Iphone (Using winSCP)
    Quote:
    IP Address: Check your current WiFi settings on your iPhone.
    (If you have trouble, try issuing a static IP.)
    Login Name: root
    Password: dottie
    Connection Type: SCP
    Port: 22
    If this is your first time connecting, it may take a minute or so. If a dialog pops up asking to Abort after 15 seconds, ignore it. If you get an error about a groups command, ignore this as well.

    Navigate to the /usr/bin directory of your iPhone (the root directory, not /var/root/ or /private/var/root).

    Drag-and-drop the extracted contents to your iphone
    bbupdater
    ICE03.14.08_G.eep
    ICE03.14.08_G.fls
    Before pressing the Copy button, press More >> to reveal more options. Check the box next to "Set permissions" and make sure the textbox has this text:

    rwxr-xr-x
    You can also enter the Octal code of 0755

    2. Now connect to your Iphone (Using Putty )
    Quote:
    IP Address: Check your current WiFi settings on your iPhone.
    (If you have trouble, try issuing a static IP.)
    Login Name: root
    Password: dottie
    Connection Type: SCP
    Port: 22
    ,
    Navigate to the root directory of your iphone by typing /. then execute
    "launchctl unload -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist "

    3. Now type cd /usr/bin then hit enter, then type chmod +x bbupdater and hit enter then type ./bbupdater -f *.fls -e *.eep and hit enter

    4. Now navigate again to the root directory of your iphone by typing /. then execute
    "launchctl load -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist "

    STEP 3
    1. Download ipsf, the version doesn't really matter (attached with zipped file above)
    a. Connect to your Iphone (using winSCP)
    Quote:
    IP Address: Check your current WiFi settings on your iPhone.
    (If you have trouble, try issuing a static IP.)
    Login Name: root
    Password: dottie
    Connection Type: SCP
    Port: 22
    b. copy SimFree.app to /Applications
    c. Navigate to the /Application/SimFree.app directory
    d. Execute the command "chmod +x bbsimfree kill rm sh"

    2. Change your DNS server in Wi-Fi settings of your iphone to 129.21.116.152 (required)

    3. Run IPSF
    a. it will say invalid token/error update token, this is normal
    b. if it says something else, that isn't normal

    4. Go to
    Quote:
    http://129.21.116.152:49973/seczones/(your imei).bin
    in your PC Internet Explorer after IPSF finishes
    a. use your real imei, not 0049..., example http://129.21.116.152:49973/seczones...5000012345.bin
    b. this file is your restored seczone, file size is 4096 bytes at time of writing.

    5. original geohotz gloader contain a bug which prevent it from work, it was corrected by guest184 and simple proggy is generated to the personal gloader.
    a. cmd and change the dir to where you have saved the file you downlaoded.. "example: for me it was C:\iphone\revirginizer"
    b. Then type "geomaker (your_imei).bin",
    c. You will receive "(Your_imei).bin_loader" - THAT IS YOURS LOADER.

    STEP 4
    Now time to restore seczone. further instructions situable only for fw ver 1.0.2.
    i assuming that you installed bsd subsystem and openssh packages.

    a. Connect to your Iphone (using winSCP)
    Quote:
    IP Address: Check your current WiFi settings on your iPhone.
    (If you have trouble, try issuing a static IP.)
    Login Name: root
    Password: dottie
    Connection Type: SCP
    Port: 22

    Transfer all the file using Winscp on your iphone (better make some dir like /usr/u)
    314fls_correct,314secpack,eeprom.eep,
    bbupdater,iUnlock, (Your_IMEI).bin_loader (not .bin from server, but generated loader)
    Before pressing the Copy button, press More >> to reveal more options. Check the box next to "Set permissions" and make sure the textbox has this text:

    rwxr-xr-x
    You can also enter the Octal code of 0755

    b. Now connect to your Iphone (Using Putty )
    Quote:
    IP Address: Check your current WiFi settings on your iPhone.
    (If you have trouble, try issuing a static IP.)
    Login Name: root
    Password: dottie
    Connection Type: SCP
    Port: 22
    Then execute this command using Putty and rest of all the commands below:
    /bin/launchctl unload -w/System/Library/LaunchDaemons/com.apple.CommCenter.plist

    that will unload commcenter

    c. now execute:
    ./iUnlock 314secpack (Your_IMEI).bin_loader

    that will write seczone loader to phone.

    d. now execute:
    ./bbupdater -v

    You WILL GET ERROR "CAN'T PING TARGER", THAT IS NORMAL !!!! MOST IMPORTANT THAT SECLOADER ARE RUN AND RESTORED SECZONE

    e. to be sure, execute again ./bbupdater -v

    f. Finally, write patched firmware in phone by executing:

    ./iUnlock 314secpack 314fls_correct

    g. now execute:
    ./bbupdater -v

    it MUST show correct version !

    h. And finally, just to be sure:

    execute:
    ./bbupdater -e eeprom.eep

    that will write correct eeprom.

    i. now execute:
    /bin/launchctl load /System/Library/LaunchDaemons/com.apple.CommCenter.plist

    OR
    reboot your phone now - it is VIRGIN and UNLOCKED with gray's "ignore mnc/mcc" method (used in anysim11)


    ------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    is it the same to run these commands through mobile terminal rather than through ssh?

    thx for yur precious advise

  9. #9
    Rookie Array

    Join Date
    Oct 2007
    Posts
    28
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    thanks anyway to the author of this thread

    http://www.hackint0sh.org/forum/showthread.php?t=12052

    another point:

    is the content of the baseband.rar correct for my status?

    1.0.2. with no sound no wifi no imei no iccid ( is that something working out there? )

    even if it would pop up with no phone functions, i'd be happy too, but wifi and sound have to work..

    guys, your support is great

  10. #10
    Rookie Array

    Join Date
    Aug 2007
    Posts
    18
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by dubmehard View Post
    good evening my dear friend.
    thanks for your contributions, this is really a great achivement.

    i can follow up to the upload, then i'm lost
    sorry for the noobness,
    but can you point me somewhere to find the exact nix command to put?

    thanks

    db
    As long as u r new to this ...then, sorry to say u will not get it to work...instead read more all over the threads. this method is for advanced geeks.
    But one thing I tell more : what is applicable in normal Terminal ,SSH ..etc in normal way is also applicable with this method ... so go a head and read more ..u will not loose , u will gain alot of knowledge ...

    dont lose hope ... so this is the beginning of the road :

    http://www.hackint0sh.org/forum/show...=ICE03.14.08_G

    follow the steps ...and instead of making SSH to the phone : do the commands from the phone with mobile terminal .

    good luck .. and tell us the results.


 

 
Page 1 of 4 1234 LastLast

Similar Threads

  1. Replies: 52
    Last Post: 08-12-2008, 09:52 AM
  2. [1.0.2] [1.0.2 OTB] No wifi+bt+imei+iccid. HELP
    By cisco_tech in forum iPhone "2G" (Rev. 1)
    Replies: 9
    Last Post: 02-28-2008, 07:19 PM
  3. [1.0.2] [1.1.1 OTB] Can't reflash. No wifi+bt+imei+iccid. Question
    By singularidad in forum iPhone "2G" (Rev. 1)
    Replies: 8
    Last Post: 02-27-2008, 07:49 PM
  4. [1.1.2 OOTB] No WiFi after HW unlock, but IMEI/ICCID works
    By [idkfa] in forum iPhone "2G" (Rev. 1)
    Replies: 0
    Last Post: 01-29-2008, 11:36 PM
  5. Replies: 0
    Last Post: 12-06-2007, 07:36 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 11:14 PM.
twitter, follow us!