Page 1 of 2 12 LastLast
Results 1 to 10 of 14
Discuss !help! No Wifi Imei Bt + Bbupdate Error at the General - Hackint0sh.org; Please help!!! I had a 1.0.2 iPhone, ran anySIM 1.1.1 and at the end it ...
  1. #1
    Newbie Array

    Join Date
    Oct 2007
    Posts
    7
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Exclamation !help! No Wifi Imei Bt + Bbupdate Error

    Please help!!!

    I had a 1.0.2 iPhone, ran anySIM 1.1.1 and at the end it said failed... since then, I have:

    Symptoms:
    1. no WIFI
    2. no IMEI
    3. no BlueTooth
    4. no Modem Firware version (blank)
    5. dialing keypad is SLOW (until I unload commcenter)
    6. in About it still says 1.0.2

    I have tried:

    1. restore in iTunes v7.3.2 and v7.4.1 (with 1.0.2) but both error 1014 in the end and didn't fix the problem...

    2. unload commcenter (even tried UIctl) and then bbupdater, but bbupdater says "unable to initialize... is the file in use?" everytime

    3. tried ieraser... same problem it reports an error and doesn't continue

    4. even tried the new iunlock with elite's .bin still error about file in use...

    Is there another way???

    I don't have a mac but can i run iBrickr ok (so I can install BSD, terminal and upload/download files)

    PLEASE HELP ME!!!



  2. #2
    Newbie Array

    Join Date
    Oct 2007
    Posts
    7
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    push

    PLEASE HELP ME POOR SOUL...

  3. #3
    Respected Professional Array

    Join Date
    Sep 2007
    Posts
    575
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    36

    Default

    U should Revirginize ur iPhone.

  4. #4
    Professional Array

    Join Date
    Jul 2007
    Posts
    55
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    9

    Default

    Hi,

    Why it happened? There is a bug in anySIM 1.1.1?

    Regards,

    Taguapire.

  5. #5
    Newbie Array

    Join Date
    Oct 2007
    Posts
    7
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Unhappy

    How can I revirginize it?

    I have tried bbupdater -v, and it returns "unable to initialize comm layer (is the file in use?)"

    And this is AFTER i have unloaded (once with Mobile Terminal and once with UIctl)

    iEraser returns similar errer about cannot access file

    I have tried the iunlock with elite's .bin file still no success

    any help please???

    I am not sure if there is a bug in anySIM because my other iphone unlocked ok...


  6. #6
    Newbie Array

    Join Date
    Oct 2007
    Posts
    7
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    push

    Can anyone help please?

    Anyone out there with a similar problem?

  7. #7
    Senior Professional Array bimmerme's Avatar

    Join Date
    Oct 2007
    Posts
    135
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    13

    Default

    Quote Originally Posted by brickman View Post
    push

    Can anyone help please?

    Anyone out there with a similar problem?
    Hey there, not to worry dude. When I bought my iPhone, I thought I'm the most screwed up guy in the world, because absolutely nothing was working. None of the manuals worked the way described and I had the feeling I'm the only one in the world with such a messed up phone.
    I was gonna write a step-by-step guide of what to do in this case, but I'm not very good with writing guides and my English is not that great either (maybe you will after you fix your phone)

    Before I explain what needs to be done, you need to familiarize yourself with things like iNdependance, iBrickr, bbupdater, Terminal, etc. There's a lot of sources on the internet, you have to search and read.

    What you need to do first is to make sure you have 1.0.2, if not - downgrade it using iTunes. iBrickr can help you on this, too.

    1. You will need to install MobileTerminal from iBrickr.
    2. All the files you need to downgrade are here http:// rapid share .com/files/65281362/downgrade-baseband_Folder.zip.html
    3. Use iBrickr to upload the files bbupdater, ICE03.14.08_G.eep, ICE03.14.08_G.fls, ieraser, and secpack to /usr/bin/
    4. Fire up Terminal on your phone, cd to /usr/bin and issue this command to stop the modem service:
    launchctl unload /System/Library/LaunchDaemons/com.apple.CommCenter.plist
    5. Type this in:
    chmod +x bbupdater
    chmod +x ieraser
    6. Run ieraser
    7. After that you can run bbupdater like this:
    bbupdater -f *.fls -e *.eep
    8. Run bbupdater -v
    ...and it should tell you that you have version 3.14
    9. Restart your phone.
    This will update your BB software and it should bring back bluetooth and wi-fi. Just in case go to Setting-General-Reset and hit Reset All Settings
    (My bluetooth and wi-fi did NOT work until I did Reset All Settings, even though the BB upgrade went OK)
    10. Next thing you do is upload the latest version of anySIM to your phone (using again iBrickr) and run it. Everything should work now after anySIM restarts your iPhone.

    Now, probably YouTube won't work, so you need to follow the instructions from here:
    http:// limitededitioniphone . com/youtube-not-working-on-your-iphone-steps-to-fix/

    (REMOVE ALL THE SPACES ON THE WEB ADDRESSES)

    It will take lots of patience since Terminal does not support DELETE function and whatever you type you can't go back, but hit return and do it again. I know Terminal is very slow, it will get fixed. Again, lots of patience!
    As I said already, this is not a fool-proof guide to do everything needed step-by-step. You might need to read more in order to get this done. For example, if you don't know how to upload files to /usr/bin with iBrickr, read about it.
    In any case, this is a working solution for bringing your phone back to life. I said at the beginning that I couldn't find info on this problem and what I meant was that all the guides reached a point where you need to ssh to your phone. But how could I ssh when everything was down - bluetooth, wi-fi, phone, EDGE. But I found use of all of them and figured it out.
    I don't insist on this being the *BEST* solution and if anybody else has a better way to do all that, we're all be glad to hear it.
    Good luck and let me know if you get stuck at any step.
    Last edited by bimmerme; 10-26-2007 at 12:28 PM.

  8. #8
    Newbie Array

    Join Date
    Oct 2007
    Posts
    7
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    bimmerme! thanks so much for the help!

    I think I am getting closer but I had these errors while running thru your steps:

    ieraser says "can't write" because the secpack file doesn't match my firmware version

    bbupdated says "failed to initialize comm layer"

    i have entered the launchctl unload command

    any pointers please?

  9. #9
    Senior Professional Array bimmerme's Avatar

    Join Date
    Oct 2007
    Posts
    135
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    13

    Default

    Quote Originally Posted by brickman View Post
    bbupdated says "failed to initialize comm layer"
    "failed to initialize comm layer" means that modem software was not stopped and you didn't successfully run the "launchctl unload" command. As far as I remember launchctl will not output anything, but you'll know if it ran OK if bbupdater gets through.


    Quote Originally Posted by brickman View Post

    ieraser says "can't write" because the secpack file doesn't match my firmware version
    Hm, did you make sure you downgraded to 1.0.2? Downgrading to 1.0.2 is fairly easy task. What we are trying to do here is downgrade the baseband.
    This secpack is the one I used, try it http:// rs25. rapid share. com/files/61914114/secpack40113.bin
    After you download it, rename it to secpack (just plain secpack, no extension) and then upload it to the phone.

  10. #10
    Newbie Array

    Join Date
    Oct 2007
    Posts
    7
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Lightbulb

    UPDATE:

    FIXED!!

    it turns out, that after issuing the "unload" command, it needs 5 - 10 mins to actually unload the CommCenter!

    for those unfortunate souls out there with the "failed to initilize comm layer", just run "bbupdate - v" every 5 mins until it start pinging the baseband!!!

    THANKS TO ALL THOSE THAT HELPED!!

    p.s. special thanks to bimmerme for sending hope over!

    * to admins: this is so far the FIRST solution to the "failed to ini comm" problem (believe me, I have searched and searched), please help spread the word to other out there? you the coolest


 

 
Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 102
    Last Post: 10-29-2009, 01:52 PM
  2. no imei, no wifi, no bluetooth
    By leskov_artem in forum iPhone 3G
    Replies: 9
    Last Post: 06-23-2009, 10:00 AM
  3. Replies: 1
    Last Post: 05-11-2008, 06:53 PM
  4. 1.1.2 no imei, no wifi ->1.1.3 but can't downgrade HELP
    By ernestofriki in forum iPhone "2G" (Rev. 1)
    Replies: 3
    Last Post: 02-09-2008, 01:45 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 02:41 AM.
twitter, follow us!