If you got ERROR and +CLCK = 1 at the last step. Do not try anymore

**glen.tw** · 09-09-2007 08:13 AM

Originally Posted by linusmax

the SMS Incoming Work ? My Iphone with same your problem is unlocked also if reply error but is unlocked. SMS Incoming don't work.

BOOOHH

LinusMax

Hi linusmax,

Did this error happen at your 1st attemp to unlock iPhone, or just like me, at 2nd/3rd attemp to unlock a relocked iPhone. "bbupdater -f ICE03.14.08_G.fls" to relock the iPhone.

**deki** · 09-09-2007 01:31 PM

same problem here. tried everything. 10 times. still getting error at the end. :-(

**linusmax** · 09-09-2007 02:43 PM

Hi Glen.tw. I do unlock for second ....after 1.02 lock the phone, changed IMEI and clear AT provider referrer.

**zebrum** · 09-09-2007 02:44 PM

try it without the sim in

**Hollanders1** · 09-09-2007 04:15 PM

May sound silly, but are you including the ' ?
And use upper case only;

'AT+CLCK="PN","00000000"

**glen.tw** · 09-09-2007 04:27 PM

Originally Posted by linusmax

Hi Glen.tw. I do unlock for second ....after 1.02 lock the phone, changed IMEI and clear AT provider referrer.

Yeah, when I "bbupdater -f ICE03.14.08_G.fls" to relock the iPhone. The IMEI has changed to 0049*** and it doesn't accept any SIM card, even super-sim one.

This is my 4th iPhone unlocked. The first 3 just work fine. This 4th iPhone does not ring of incoming call in standby mode. So I tried to relock and unlock again. See if I can fix no ring issue. No luck, even worst.

Thank you for your information.

**gtech** · 09-09-2007 07:10 PM

alright so i had the same problem and i finally got it to work. My error msg was the following:

AT+CLCK="PN",0,"00000000"
ERROR
AT+CLCK="PN",2
+CLCK: 0

I was getting no network and couldnt receive or send calls. In order to fix it I did the following things...now im not sure what fixed it but it sure workes now
- I did the following command
launchctl unload -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist
- I uploaded the file lockdownd in the /usr/libexec/
- I uploaded the file termcap and ICE03.14.08_G.fls that I found in the Geohack package to /usr/bin/
- I did the following command
launchctl unload -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist
- I used the yourtube click and activate program.it was giving me no sim card errors
- I then went back in putty and did the following command
launchctl load -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist

put sim card back in and there is was...signal and everything....hopefully this will work for other ppl aswell

**winwrc** · 09-09-2007 08:20 PM

- I used the yourtube click and activate program.it was giving me no sim card errors

where found this software¿

**Sher** · 09-10-2007 01:04 AM

hey gtech, thanks for the solution. just a few questions...

- I uploaded the file termcap and ICE03.14.08_G.fls that I found in the Geohack package to /usr/bin/

are you just uploading these files or you upload the termcap and ice file then run ICE using bbupdater -f

**Tamagochi** · 09-10-2007 07:09 AM

If you got ERROR and +CLCK = 1 at the last two commands. Do not try anymore.
It means that you have used up the number of trials to unlock the phone.
And the phone has been Hard-locked FOREVER! Do not waste more time. Get new one and unlock, the price is now 200$ less.
Sorry to say the truth.