Results 1 to 6 of 6
Discuss [1.0.2] updating to 1.1.1 at the General - Hackint0sh.org; I do the usual, hit select, choose 1.1.1, update. From there iDemocracy says to boot ...
  1. #1
    Newbie Array

    Join Date
    Dec 2007
    Posts
    8
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default [1.0.2] updating to 1.1.1

    I do the usual, hit select, choose 1.1.1, update. From there iDemocracy says to boot installerapp and choose....1.0.2? I did it anyways, and it didn't work. Now it's stuck in 1.1.1 recovery mode, how do I get it out of it?



  2. #2
    Professional Array

    Join Date
    Sep 2007
    Posts
    52
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    9

    Default

    Quote Originally Posted by RCizzle65 View Post
    I do the usual, hit select, choose 1.1.1, update. From there iDemocracy says to boot installerapp and choose....1.0.2? I did it anyways, and it didn't work. Now it's stuck in 1.1.1 recovery mode, how do I get it out of it?
    I just upgraded my 1.02 old anysim unlocked phone today. Forgot to mention I used the Reverginizer method that was available on installer. What I did was :


    Make sure you have a SIM-card with PIN turned off, and power on your phone (the supplied AT&T card works fine).
    On the activation screen, slide for emergency and dial: *#301# to make the phone call itself. (If the incoming call dialog quickly disappears but it keeps ringing, just dial 0 (remove *#301# first), and it will call itself)
    Answer the call, and tap on Hold
    Phone will call it self again, tap Decline. You will now be returned to the normal dialer.
    Tap on contacts, and tap the + icon to add a new. The only info you are going to add to this contact are two URL's. To add a URL, tap Add new URL. The first URL is prefs followed by a colon: prefs: and the second is jailbreakme.com. Tap Save.
    Your contact now has two "web pages" - tap on the first one (prefs. This will take you to the settings dialog. The reason you want this, is because you need to connect to a Wi-Fi network, so tap on Wi-Fi, and get connected to a network, and make sure the icon on top of the screen is indicating that you are connected. While you are in the settings dialog, you should also set: General → Auto-Lock → Never.
    Now, press the home button, and again, slide for emergency dial 0, Answer the call, Hold and Decline the new call so that you get to the contacts. Tap on your contact (No Name), and this time tap on the other home page, jailbreakme.com
    Safari will launch and show you a webpage. Read through the text, before you Install AppSnapp
    Phone will return to activation screen, but don't panic, just wait.
    Phone should automaticly restart after almost a minute. . If it does not restart withing 2 minutes, click here.
    When the phone starts again, it should no longer say slide for emergency, but rather Slide to unlock It means it was successfull! Activation is now bypassed, and phone prepared for software installation! (If you are going to use an AT&T SIM, you won't need to do the next step.)

    BTW these instructions are from www.iphone.unlock.no Props to them for a very easy process.

  3. #3
    Senior Professional Array

    Join Date
    Dec 2007
    Posts
    144
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    15

    Default

    Just restore, and go to jailbreakme.com

  4. #4
    Newbie Array

    Join Date
    Dec 2007
    Posts
    8
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Restoring/Updating to the 1.1.1 update does nothing, it leaves it in restore mode, is there a way to get out of that, so I can actually function and go to jailbreakme.com? So then I can update jailbreaked'd on 1.1.3

  5. #5
    Board Hero Array gaz919's Avatar

    Join Date
    Sep 2007
    Posts
    1,124
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    65

    Default

    when updating from 1.0.2 to 1.1.1 using carnaval is the best method.

    if the anysim used was older than anysim1.1 then you need to virginise first.

    then just update to 1.1.1 via itunes
    after run carnaval on pc with phone connected and follow the prompts
    finally unlock with anysim1.1 and delete anysim

    do a search for carnaval in unlocking and follow a good guide rather than making new posts

    good luck

    ps ibricker not the new one will get you out of restore mode


  6. #6
    Newbie Array

    Join Date
    Dec 2007
    Posts
    8
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    I didn't do any sim unlocking, so do I just need to update to 1.1.1, and use ibrikr?

 

 

Similar Threads

  1. Replies: 11
    Last Post: 02-27-2011, 12:27 AM
  2. Updating to 4.0 without updating baseband
    By Riku in forum iOS 4.x (iPhone OS 4.x)
    Replies: 6
    Last Post: 02-07-2011, 09:42 AM
  3. Updating 3.0 3GS to 3.1+ without updating baseband?
    By dannylu88 in forum PwnageTool
    Replies: 1
    Last Post: 11-03-2009, 09:29 PM
  4. Updating to 2.0.1 FAQ
    By JSN1 in forum PwnageTool
    Replies: 24
    Last Post: 08-07-2008, 03:55 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 02:07 AM.
twitter, follow us!