Please confirm this:
I dont use Ziphone any more.
But i remember it used to install
OpenSSh when u Jailbreak.

Its the only way to get it to the iPhone
if iLiberty dosent pair.
Could u confirm this please?

Does someone remembers?

Originally Posted by lamanodedios

Please confirm this:
I dont use Ziphone any more.
But i remember it used to install
OpenSSH when u Jailbreak.

Its the only way to get it to the iPhone
if iLiberty dosent pair.
Could u confirm this please?

Does someone remembers?

What do you mean, iLiberty wont pair?
Is the iPhone jailbroken and has OpenSSH installed?
If so, you need to be in a location where the iPhone used to know and connect to the Wi-Fi network, cause you dont have access 8passcode) to make it connect to your local network.
Then you just use PuTTY and
ssh -l root 192.168.1.234
where the IP number is replaced by the one the iPhone is using. Then just
rm /private/var/mobile/Library/Preferences/com.apple.springboard.plist
restart the iPhone and you are set

If the iPhone connects to the Wi-Fi via DHCP you need to find out it's IP first cause you cant use "Settings" on the iPhone.

Start PuTTY and issue
arp -a
The first IP is probably your router and the second is your phone.

If the iPhone is not jailbroken and so has no BSD/OpenSSH/Wi-Fi connection you are stuck with all the methods above. iLiberty would let you install a custom payload with BSD Subsystem and OpeSSH plus take care for the jailbreak before but in order to use OpenSSH you would need to setup Wi-Fi connection before.

In this case it is getting lot more complicate. Thats where you would have to create a custom ramdisk and - again - use iLiberty.

Let me know if OpenSSH is installed on the iPhone and if it has Wi-Fi connection.

U are right.
BUT.

I can not connect to Wifi.
So i am going to use the iPhone Tunnel Suite.
that let me connect to the iphone via winscp or
putty with the usb cable.

But for this i need to install OpenSsh.
Iliberty wont let me because it has the password
and it wont pair (connect with itunes) .

So i think ziphone didnt used to care about this.
I will try to jailbreak with ziphone and it will install
openssh.

If not i will have to use a itunes 7.6

Thanks

So.
It didnt work.

Ziphone installed oPensSsh While it jailbreak.
But. iPhone tunnel Suite wont work
if the iphone dosent pair with itunes.
iPhone is not pairing because.
The iphone has a Password.

And theres no way to connect to Wifi.


So.
Theres no way to do it.

At least i can create a ram disk.
But not clue.

Thanks though!

New Idea!
Do u know if ibooterwin.exe will let me:
rm /private/var/mobile/Library/Preferences/com.apple.springboard.plist ?

What do u think?
I can put the iphone in Restore Mode.

And i think ibooterwin is able to
erase directorys and stuff.

I dont think this is going to work. You have installed OpwnSSH on the iPhone and it is jailbroken. BTW: did you install BSD subsystem aswell?

The question is: did your customer use it at home with his wi-fi access point?
If so, in his enviroment the iPhone would log into his wi-fi - even when passcode locked.
I told you how to find out it's IP number then.
After that you could just ssh into the iPhone and remove the plist.

iBooter wont do the job on its own as far as I know.

Originally Posted by volkspost

I dont think this is going to work. You have installed OpwnSSH on the iPhone and it is jailbroken. BTW: did you install BSD subsystem aswell?

The question is: did your customer use it at home with his wi-fi access point?
If so, in his enviroment the iPhone would log into his wi-fi - even when passcode locked.
I told you how to find out it's IP number then.
After that you could just ssh into the iPhone and remove the plist.

iBooter wont do the job on its own as far as I know.

I thought the same u did.
Go to his home because iPhone will
recognize the Wifi.
To find the ip 192.168.1.1 and look for the iphone name.

Yes Ziphone installed bsd and openssh.

I will try with ibooterwin.
at leat i remember it will let me
turn radio off so it must be able
to erase a diretory..


thanks

Originally Posted by lamanodedios

I thought the same u did.
Go to his home because iPhone will
recognize the Wifi.
To find the ip 192.168.1.1 and look for the iphone name.

As I said, if you are at his home, start the iPhone, start one of his PC's/Macs, start a Terminal session and issue
arp -a
You'll get something like

Code:

my.router (192.168.1.1) at 0:50:7f:xx:xx:xx on en0 [ethernet]
? (192.168.1.229) at 0:1c:b3:xx:xx:xx on en0 [ethernet]
? (192.168.1.231) at 0:21:e9:xx:xx:xx on en0 [ethernet]

229 and 231 are the two iPhones actual in my network, easy to identify via MAC (x-ed out the values ;-)

Yes Ziphone installed bsd and openssh.

Good, you will need BSD and OpenSSH anyway

I will try with ibooterwin.
at leat i remember it will let me
turn radio off so it must be able
to erase a diretory..

As I said, I dont think this is going to work.

The easiest way would be at your customers house, done in a minute.
Have send you a pm.

v.

VolkSpot.
Thanks a lot for everything
I will try to go to his home if he is
not far away. If u dont know i live
in argentina. Buenos Aires is HUGE!

First i will try ibooterwin.exe.
Although
if it dosent work u know.

I dont care if i am able to get the info out.
but please send me ur paypal adress i would
like to send u some dollars.

thanks
hernan

command list:
help this list
script run script at specific address
go jump directly to address
bootx boot a kernel cache at specified address
diags boot into diagnostics (if present)
tsys boot into tsys (if present)
bdev block device commands
image flash image inspection
fs file system commands
fsboot try to boot kernel at /kernelcache
devicetree create a device tree from the specified address
ramdisk create a ramdisk from the specified address
halt halt the system (good for JTAG)
reboot reboot the device
poweroff power off the device
md memory display - 32bit
mdh memory display - 16bit
mdb memory display - 8bit
mw memory write - 32bit
mwh memory write - 16bit
mwb memory write - 8bit
mws memory write - string
crc POSIX 1003.2 checksum of memory
printenv print one or all environment variables
setenv set an environment variable
clearenv clear all environment variables
saveenv save current environment to flash
run use contents of environment var as script
bgcolor set the display background color
setpicture set the image on the display
iic iic read/write
radio Manipulate the radio board.
setbusclock Set bus clock to the given frequency in Hz.
setcorevoltage Set core voltage to the given voltage in mV.
syscfg flash SysCfg inspection
charge Manage the charger chip.
powernvram Access Power NVRAM.
usb run a USB command
chunk chunk a file

Any ideas?
Thats ibooter command list.