Hy Hackint0sh.org,

Many many many days on searching my paradise and i almost find it but...

I ] Components:

1) THINKPAD R40 2723-E5G:
Lenovo Support & downloads - Overview - ThinkPad R40

2) CPU = Intel Pentium M 705 1.5Ghz
_L1 32Ko+32Ko
_1024L2
_MMX, SSE, SSE2
_Speedstep 3rd generation

3) GPU = ATI Radeon Mobility 7500 AGP 32Mo

4) 2 x 512Mo DDR400

5) LAN Intel Pro 10/100

6) WLAN Intel Pro 802.11b/g

7) Audio = Soundmax AC97


II ] Config OSx86:

1) XxX_OS_x86_10.4.11_Install_Disc_rev2 (f***ing hard to find which one to use...)

2) Boot: -v -x = OK

3) Graphical interface, trackball+touchpad = OK

4) Partitioning HFS+ journalised = OK


III ] Personal Config choices:

1) PC efi Bootloaders = efi v8 MBR* (maybe here is the problem...)

2) X11 = ALL
3) Apple software updates = ALL
4) Base install combos = SSE2
5) 8.9.1 Kernel, no efi supported+patches*
6) Optional kernels = 8.9.1 Universal Apr01+Apr23+Jul08*
7) Optional patches = ALL
8) ATA/USB = ICH8*+Generic EHCI+IOPCIFamily.kext/IOPCCard.....
9)Graphic drivers = SSE2 DVDPlayer patch*+ATI Radeon 7500 AGP+AGPGart full
10) Audio = Generic AC97 Audio
11)Network LAN + WLAN = Intel82562EZ*,AppleIntel8255x.kext*+Intel iwi2200(Wless)
12)Miscellanous = ALL
13) System addons = ALL

-*= maybe wrong choice i guess...


IV ] Install went fine, reboot


V ] Nothing!!! Black screen!!! F**K!!!
Bootloader? Must i use GUID instead EFI?
If anyone knows, just tell me...
I really worked hard to reach this point but...
So be patient, i'm a Mac NOOB...
If i use GRUB, is it possible to boot MacOSx86?
It seems to be 2 partitions on the HDD (1 EFI fat32+ 1 HFS+) after the install.
Do i need to reinstall an EFI bootloader on the first partition and after, to install GRUB on MBR?
Is my personnal config wrong? Kernels?

Thank you all anyway...

[G.R.K] a french homeless...

Please anyone,

just tell me about my config...
Any advises would be appreciate...

Or do i must stuck my fingers deep in my ass?

I understood that in the OSx86 world, nobody helps you until you proove that you really try hard before...

So, i tried iATKOS, LEO4ALL, Kalyway, Myz, iDeneb, etc... and i finally found XxX_OSx_10.4.11 which seemt to be the one i needed...
Then i searched the way to configure it... ALL BY MYSELF!!!
Without asking anyone...

So please, just tell me if i must helpmyself alone?
Just say "F**k you and i will understand what it means here...

Thanx anyway

1) XxX_OS_x86_10.4.11_Install_Disc_rev2 donc:
- Boot: -v -x = OK
- Graphical interface, trackball+touchpad = OK
- Partitioning HFS+ journalised = OK

2) Personal Config choices:

- PC efi Bootloaders = efi v8 GUID
- X11 = ALL
- Apple software updates = ALL
- 8.9.1 Kernel, no efi supported+patches*
- Optional kernels = NONE
- Optional patches = ALL
- ATA/USB = IGeneric EHCI
- Graphic drivers = ATI Radeon 7500 AGP+AGPGart full*
- Audio = Generic AC97 Audio
- Network = Intel iwi2200(Wless)
- Miscellanous = ALL
- System addons = ALL

-*= Wrong choices?...


3) Install went fine, reboot


4) F8, MacOSx, boot...

5) Everything apparently OK until:

AGP : Device is in legacy mode, setting AGP v2 mode 4
panic(cpu 0 caller 0x001A496B) : Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x00000038, CR3: 0x01da0000, CR4: 0x000006e0
EAX:.........................etc.................. .....(si besoin est, je peux les noter tous)
.................................................. .................................................. ...................
.................................................. .........................................DS: 0x00000010

Debugger called: <panic>
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x14c5bc78 : 0x128d08 (0x3cc480 0x14c5bc9c 0x131ec5 0x0)
.................................................. ...............................................
.................................................. ...............................................
.................................................. ...............................................
.................................................. ...............................................
.................................................. ...............................................
.................................................. ...............................................
.................................................. ..............................................) Backtrace terminated-invalid frame pointer 0x0

Kernel version:
Darwin Kernel Version 8.9.1: Thu May 3 02:38:46 UZT 2007; made by ToH:xnu-792.18.15/BUILD/obj/RELEASE_I386


And then i've got a static prompt and nothing more happens
Another kernel?

Please, answer me