Mac OS X Leopard on Toshiba NB205 Netbook - Page 18

zachs94 · #**171** (**permalink**) 07-27-2009, 07:53 PM

Quote:

Originally Posted by thebreezer

Yes I have updated to 10.5.7 but no Trackpad icon...The changes in the bios settings for the sleep problems seem to work...Thanks!!!!

I have had the same problem after reinstalling osx multiple times. Voodoops2 also shows "ApplePS2SynapticsTouchpad not found"

cannontrane · #**172** (**permalink**) 07-27-2009, 08:23 PM

Quote:

Originally Posted by iulus

Hey wingzero,

thanks for this awesome guide. after reading this guide for several days now and doing some of my own researched i finnaly used it and i got osx86 installed on my nb205. i used a usb flash drive cause i do not have an external optical drive and did not want to buy one just so i could use it once and never touch it again. i read here that some people are wondering how to boot from a usb flash drive. however and my disclaimer i take no credit for the guide i used. it was just a guide i found using our old friend google. here is the guide on how to prepare ideneb to boot from a usb flash drive using windows Installing from USB flash/key/thumb drive...using Windows only tools - InsanelyMac Forum again it is not my guide and i take no credit for it. i am probably a little late on posting this cause i see that someone has posted their boot-132 bootable usb drive, oh well.

my experience thus far. i have not finnished my install yet cause i do not have wifi yet and i did all the installation at a friends house and once i got to the last part of your guide were you would install system updates via internet i stopped there and decided to finish at home. i did not install your ethernet fix yet and i have yet to install those updates. however i do have a wifi usb drive that i bought a long time ago for whatever reason. its a netgear WG111v3 found the driver for it online and installed it. osx does recognize it but when i tried to connect to my network i forgot my pass key for my network. i have it written down somewhere on my pc but my power supply went kabloie today so i dont have access to it right now. so i cannot comfirm that this actually works. ill post my results later to help some folks out.

another thing is the sleep function but i think i read on here how to fix that and will post later if it worked.

another problem i have is that when i click on my mac the screen goes blue and than asked me to log in as if i have rebooted the system. i see some pics on here of some folks showing that they got ideneb working and showing there my mac window and i was wondering why does my system goes blank and (as far as i know) reboot? and does installing the system updates in your last step fix that? i know its not a big thing and its not going to kill me if it doesnt work. but i was just wondering if this is normal, are others having this problem,and is there a fix for this?

also there is no track pad config (or whatever you call) in preferences. i click keyboard and mouse but i only get to config the keyboard and not the track pad. i would like to slow the cursor down just a little.

@cannontrane: i was just wondering if you swapped out your wifi chip in order to get wifi to work? just like our man wingzero swapped the atheros for a brodcomm? if so, did you use the brodcomm like wingzero? or did you use another chioset? if so, what?

Hey, I'm glad you are making progress. I haven't swapped out the chip just yet (so no wifi at the moment or bluetooth) - I'll post my guide for you, cause it may help!

This is the one I ordered, but haven't received it yet: Apple Airport Extreme Wifi Mini PCI-E Card 802.11n - eBay (item 220446598982 end time Aug-01-09 08:46:30 PDT)

cannontrane · #**173** (**permalink**) 07-27-2009, 08:35 PM

Single Boot OSX 10.5.7 on Toshiba NB205 with Chameleon 2.0 RC1 Bootloader
Guide by CannonTrane

**NOTE** This guide should also work well for Retail DVD install. Only thing that changes is a manual install of Chameleon.**

**DISCLAIMER** ATTEMPT AT YOUR OWN RISK. FOR EDUCATIONAL PURPOSES ONLY **

Big thanks to wingzero619 for making his guide on installing iDeneb 1.3 - without him, this would not be possible. Also thanks goes to everyone involved in creating BOOT132 & the iDeneb install method, as well as anyone responsible for the links at the end of this guide.

What you need:
1- NB205-SlimBuild-Preboot.iso http://www.mediafire.com/file/t2omkt...ld-Preboot.iso
2- Blank CD
3- iDeneb v1.5 on DVD
4- Toshiba NB205 (mine is a NB205-N310/BN)
5- If you want Wifi, you have to replace the mini pci card

Begin:
-------
Ensure you are plugged in for power.

0) BIOS Settings
----------------
Disable USB Sleep & Charge
Set SATA Controller to Compatibility mode
Turn on Legacy USB

1) Booting to iDeneb 1.5
-------------------------
Burn NB205-SlimBuild-Preboot.iso to CD
Insert CD into USB CD/DVD Drive connected to NB205
Press F12 to select boot to CD, press enter
Wait for Init.img to load
Press F8
Press Esc
Switch CD out with iDeneb 1.5 DVD
Press enter (or type 9f then press enter)
Press F8
Type "-v -f" and press enter
Watch and wait (or grab some coffee!)

2) iDeneb 1.5 Setup (in all 1024x600x32 Glory!)
------------------------------------------------
Once setup is up and running, launch a Terminal Window and type the following:

Code:

sudo -s
diskutil unmountDisk /dev/disk0
exit

Close Terminal
Open Disk Utility
Clik on your Hard Drive then click the Partition tab
Partition the Hard Drive with one partition and make it use GUID (under Options)
Name the partition.
Mine looks like this:

Code:

GUID || OSX 149.05GB ||

Apply the Partition
Close Disk Utility and continue with setup
Select your new Mac OS Partition and click Continue
Click Customize
Set the following Customizations:

Code:

Fix
 Firewire Remove
 VoodooBattery Manager
 VoodooPower with GeneralCPUMControl
 VoodooUSBEHCI
Kernel
 9.7.0 Vanilla
Chipset
 ICHX Fixed
Wireless
 BroadcomWifi
Video
 Intel GMA950

Since Chameleon is a default setting, we do not have to select a bootloader. Technically, you don't have to select the Vanilla kernel either.

Click Install
OPTIONAL: Click Skip (to cancel verification of install media)
Wait for the installer to finish.
Click Restart

3) Booting up to OSX
--------------------
Boot up like normal from the hard drive. You should see the Chameleon 2.0 Bootloader screen and the computer should boot up fine to the fresh install. Now it's time to install the remaining Kexts to Chameleon to gain full functionality.

For this, we will need to go into the Terminal

Make sure the Boot CD is on the Drive before doing this.

Type:

Code:

sudo -s
ENTER YOUR PASSWORD THEN PRESS ENTER
mkdir /Volumes/EFI
mount_hfs /dev/disk0s1 /Volumes/EFI
cp -f -R -p -v /Volumes/ToshNB205Boot1/Extensions /Volumes/EFI/Extra
rm /Volumes/EFI/Extra/Extensions.mkext
umount -f /Volumes/EFI
rm -rf /Volumes/EFI
exit

Reboot!
Make sure you boot from the hard drive. If everything went ok, you should load into OSX without issues.

You can also go back into the BIOS and Turn Off Legacy USB

WORKS:
--------
Video Works
Dual Monitors Works
WebCam works, but not in Photo Booth (ok in iChat and Webclient of Gmail)
Ethernet Works
Audio Works, headphone automatic sensing does not. To switch between the built-in speakers & headphones, use the Settings in OSX to select the output device.
Microphone works.
TimeMachine Works.
Touchpad Works.
Sleep works. (As long as you made the BIOS settings changes for Legacy USB and Sleep & Charge)
All USB Ports work.
SD Card reader works.
Battery meter works.

DOESN'T WORK:
-------------
Wifi does not work because the NB205's Atheros AR9285 chip is not yet compatible with OSX.
Bluetooth does not work.

Links for more Info:
--------------------
Boot132: New modified BOOT-132 allows you to boot retail DVDs - InsanelyMac Forum
Boot132 to USB: [How To] Create bootable USB with BOOT-132 loader - InsanelyMac Forum
Wingzero619's Guide: http://www.hackint0sh.org/forum/f181/77504-4.htm
Et Cetera Blog https://www.joshuaochs.com/Home/Et_C...-_Drivers.html

calic0 · #**174** (**permalink**) 07-27-2009, 09:02 PM

can confirm there is a nice speed increase with system running much more fresh when I took old 1GB chip replaced with 2GB.

@cannontrane Great work mate! Nice post. With your method see if what the Video Mirroring is like -- as yet I can get it to work.

cannontrane · #**175** (**permalink**) 07-27-2009, 09:30 PM

Quote:

Originally Posted by Riblowski

Nope, not that, pretty familiar with the usual symptoms. I tried the excellent guide here and had a nice working system bar the trackpad. However wanted a more vanilla and less hacked solution.

As for sleep/wake, the laptop wakes immediately after sleeping as someone else mentioned. Still tracking it down...

Try my guide in the thread for Boot 132. It's probably a kext that you are missing, or that you are missing the dependencies for.

jeff000 · #**176** (**permalink**) 07-27-2009, 09:44 PM

Hi,

Cannontrane, I am attempting to use your install method but the file that you posted that needs to be downloaded, I cannot download it as it says the limit has been reached. Is there any way I can get it?

Thanks.

FireEmblemPride · #**177** (**permalink**) 07-27-2009, 09:55 PM

Hi,

This is my first post. I'm ready to turn my Toshiba NB205 into a hackbook since I'm able to borrow an external DVD drive from a friend.

My only question is: will being a Japanese model affect this process in anyway, particularly regarding the keyboard?

Thanks.

cannontrane · #**178** (**permalink**) 07-27-2009, 09:59 PM

Quote:

Originally Posted by jeff000

Hi,

Cannontrane, I am attempting to use your install method but the file that you posted that needs to be downloaded, I cannot download it as it says the limit has been reached. Is there any way I can get it?

Thanks.

New link: http://www.mediafire.com/file/n3nmmg...205Boot132.iso

jeff000 · #**179** (**permalink**) 07-27-2009, 10:01 PM

Quote:

Originally Posted by cannontrane

New link: http://www.mediafire.com/file/n3nmmg...205Boot132.iso

Thank you so much. I will give my results when I'm done installing.

cannontrane · #**180** (**permalink**) 07-27-2009, 10:13 PM

Quote:

Originally Posted by thebreezer

Yes I have updated to 10.5.7 but no Trackpad icon...The changes in the bios settings for the sleep problems seem to work...Thanks!!!!

Use OSX86 Tools to install this Kext.

VoodooPS2Trackpad.kext.zip

It may be different than the one you are using right now.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Leopard on a Toshiba nb100?	afontcu	Installation	12	09-29-2009 01:31 AM
Leopard on Toshiba Laptop?	Gearstix	Distributions	1	06-19-2009 08:45 AM
Toshiba Qosmio	grandlorie	Installation	0	04-30-2009 09:27 PM
Ilike to instal leopard and vista dualboot together in one HDD, on my TOSHIBA L300	MAC_IS_A_PC_TOO	Installation	1	04-23-2009 04:57 PM
Help, how to install Leopard on Toshiba A200 (Model. A200-1GB)	trompeteandos	Installation	3	01-20-2009 12:23 AM