Hi there,

I am so sorry to trouble you all. I have tried installing iAtkos on the abovementioned PC at least 50 times but have not been successful at any rate. It seems like the most successful I've been to is actually the famous "waiting for root device" prompt.

The specifications for my PC are listed here: SR1960AP Specs

But just a summary:
Processor: Pentium D 925 (P) DC 3.0 Ghz - Socket 775
Chipset: ATI Radeon Xpress 200 for Intel Processors
Motherboard: Manufacturer-ECS, Name-RC410-M, HP-Name-Alhena-GL6
Video: nVidia 8600 GT 256MB
Memory: 1GB DDR2 SDRAM
Harddisk: 160GB SATA

I've got a niggling feeling that the issues actually lie with the customization as my research seems to show that my specs do fit the requirements for iAtkos installation. I am also unable to choose AHCI for the SATA controller in BIOS as there is no option for it at all.

Does anyone have experience installing the above and have the correct customization settings please? Would appreciate any help pointing me down the right direction as well. Thanks!

Turned out the problem was with the motherboard. ECS Alhena is NOT supported at all by iAtkos 5i.

Installed iAtkos 5i without ANY issues. Everything works on the fly, sound, ethernet, everything. Only issue was with my DWL-G122 which I just had to install the ralink driver, reboot and viola. Thanks so much for helping icchssan!

Looks nice, I dont think you have AHCI on your BIOS, anyway if you wanna try iAtkos check the official site of the distro to know the basic, then try again, for this system you will need a patched kernel like voodoo or speedstep, for everything else check the site, also try to know everything you can about your own hardware, that way you wont have any problem, good luck

__________________
HP Pavilion Elite m9250f
iAtkos v5i (10.5.8), Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
Macbook Pro 13"
Follow meh: @icchansan

If you just want to support hackint0sh.org with a donation click here

I reckon it means that I should select the Intel SATA without the AHCI? Does the ATI chipset interfere with anything?

Btw, is the website for the Distro this? iATKOS OSx86 Project: Welcome to iATKOS 5i OSx86 10.5.5 / 10.5.6

Can't seem to get it to work honestly. I've got a feeling that my ECS Mobo with Alhena isn't compatible with iAtkos.

Should I just build a new Mobo?

Okay so I've decided to change the Mobo and processor at the same time. Thinking of getting the one you recommended icchansan!

Motherboard: Gigabyte GA-G31M-S2
Processor: Core 2 Duo E2200
Video: Nvidia 7300 GS, 8600 GT
Memory: 2GB RAM DDR2
Hard Drive: 1x300GB 7200 rpm
Power Supply 350/450w

Would the above work smoothly with iAtkos?

Yeah it should work without problem, actually theres guides for that mobo you wont have any problem ;P

__________________
HP Pavilion Elite m9250f
iAtkos v5i (10.5.8), Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
Macbook Pro 13"
Follow meh: @icchansan

If you just want to support hackint0sh.org with a donation click here