For some reason my ethernet keeps flaking out on me? I've had this ethernet installed for quite some time and I really had any issues until I did a reinstall? When I copy files over the network, it just craps out and stops copying and i have to reboot?

Any ideas would be greatly appreciated. I downloaded the skge.zip file using OSx86 tools, but that didn't seem to fix the problem?


Output from my LSPCI:
Last login: Mon Dec 22 10:47:41 on console
leopard:~ krogers$ lspci
00:00.0 Host bridge: nVidia Corporation Unknown device 0070 (rev c1)
00:00.1 RAM memory: nVidia Corporation Unknown device 007f (rev a1)
00:00.2 RAM memory: nVidia Corporation Unknown device 0075 (rev a1)
00:00.3 RAM memory: nVidia Corporation Unknown device 006f (rev a1)
00:00.4 RAM memory: nVidia Corporation Unknown device 00b4 (rev a1)
00:01.0 RAM memory: nVidia Corporation Unknown device 0076 (rev a1)
00:01.1 RAM memory: nVidia Corporation Unknown device 0078 (rev a1)
00:01.2 RAM memory: nVidia Corporation Unknown device 0079 (rev a1)
00:01.3 RAM memory: nVidia Corporation Unknown device 007a (rev a1)
00:01.4 RAM memory: nVidia Corporation Unknown device 007b (rev a1)
00:01.5 RAM memory: nVidia Corporation Unknown device 007c (rev a1)
00:01.6 RAM memory: nVidia Corporation Unknown device 007d (rev a1)
00:02.0 PCI bridge: nVidia Corporation Unknown device 007e (rev a2)
00:04.0 PCI bridge: nVidia Corporation Unknown device 007e (rev a2)
00:05.0 PCI bridge: nVidia Corporation Unknown device 007e (rev a2)
00:06.0 PCI bridge: nVidia Corporation Unknown device 007e (rev a2)
00:07.0 PCI bridge: nVidia Corporation Unknown device 007e (rev a2)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a2)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a2)
00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a2)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1)
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GT] (rev a1)
06:0c.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)

Output from my DMESG:
leopard:~ krogers$ sudo dmesg
Password:
g fails
pci10de,7f: family specific matching fails
pci10de,70: family specific matching fails
HUB0: family specific matching fails
XVR3: family specific matching fails
XVR4: family specific matching fails
SAT2: family specific matching fails
IDE0: family specific matching fails
MIP4: family specific matching fails
XVR0: family specific matching fails
XVR1: family specific matching fails
XVR2: family specific matching fails
SMB0: family specific matching fails
USB0: family specific matching fails
USB2: family specific matching fails
pci10de,272: family specific matching fails
pci10de,270: family specific matching fails
pci10de,7d: family specific matching fails
pci10de,7c: family specific matching fails
pci10de,7a: family specific matching fails
pci10de,79: family specific matching fails
pci10de,78: family specific matching fails
pci10de,76: family specific matching fails
pci10de,b4: family specific matching fails
pci10de,6f: family specific matching fails
pci10de,7f: family specific matching fails
pci10de,70: family specific matching fails
HUB0: family specific matching fails
SAT1: family specific matching fails
VT86: family specific matching fails
pci10de,7b: family specific matching fails
HUB0: family specific matching fails
SAT1: family specific matching fails
SAT2: family specific matching fails
IDE0: family specific matching fails
MIP4: family specific matching fails
XVR0: family specific matching fails
display: family specific matching fails
XVR1: family specific matching fails
XVR2: family specific matching fails
XVR3: family specific matching fails
XVR4: family specific matching fails
SMB0: family specific matching fails
VT86: family specific matching fails
USB0: family specific matching fails
USB2: family specific matching fails
AZAD: family specific matching fails
pci10de,272: family specific matching fails
pci10de,270: family specific matching fails
pci10de,7d: family specific matching fails
pci10de,7c: family specific matching fails
pci10de,7b: family specific matching fails
pci10de,7a: family specific matching fails
pci10de,79: family specific matching fails
pci10de,78: family specific matching fails
pci10de,76: family specific matching fails
pci10de,b4: family specific matching fails
pci10de,6f: family specific matching fails
pci10de,7f: family specific matching fails
pci10de,70: family specific matching fails
Matching service count = 1
skgeosx::probe(ethernet)
skgeosx::start(ethernet) <1>
skgeosx: SKGE for OSx86 v0.2e ---- M.Musashi (c)2007
skgeosx: VendorID:11ab DeviceID:4320 Rev:13
skgeosx: board is Yukon-Lite
skgeosx: registerWithPolicyMaker
skgeosx: setPowerState state 1
skgeosx: board is built-in
Apple16X50ACPI1: Identified Serial Port on ACPI Device=UAR1
Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200
NVDANV40HAL loaded and registered.
AZAD: family specific matching fails
NVDANV50HAL loaded and registered.
AZAD: family specific matching fails
AZAD: family specific matching fails
display: family specific matching fails
NVDA::probe(display)
------------------------------
NVKush: By DiaboliK
NVKush: GeForce 7600 GT Detected
NVkush: a DiaboliK Joint
------------------------------
NVDA::start(display) <1>
NVDA::start(display) <1> failed
AZAD: family specific matching fails
display: family specific matching fails
AZAD: family specific matching fails
ALCinject: Starting.
ALCinject: Setting built-in=<data not shown>
ALCinject: Setting layout-id=<data not shown>
ALCinject: Setting PinConfigurations=<data not shown>
AZAD: family specific matching fails
dsmos: Initializing...
dsmos: Hook and decryption contexts set!
dsmos: Starting...
skgeosx: Ethernet address 00:18:f3:9f:e7:36
skgeosx: Enabled!
skgeosx: setMulticastMode on
skgeosx: setMulticastMode off
skgeosx: link speed now 100 Mbps, full duplex.
skgeosx: setMulticastMode on
LSPCIUserClient: Client successfully started.
LSPCIUserClient: Client successfully closed
LSPCIUserClient: Client successfully started.
LSPCIUserClient: Client successfully closed
LSPCIUserClient: Client successfully started.
LSPCIUserClient: Client successfully closed
leopard:~ krogers$

And We have to guess whats your LAN Chipset rite?

__________________
HP Pavilion Elite m9250f
iAtkos v5i (10.5.8), Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
Macbook Pro 13"
Follow meh: @icchansan

If you just want to support hackint0sh.org with a donation click here

Onboard LAN
LAN Chipset Marvell 88E8001
Max LAN Speed 10/100/1000Mbps

Try installing this: Marvell 88E8001

__________________
HP Pavilion Elite m9250f
iAtkos v5i (10.5.8), Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
Macbook Pro 13"
Follow meh: @icchansan

If you just want to support hackint0sh.org with a donation click here

So far its working but I keep getting these message and doing xfers on the LAN are extremely slow. Thanks, let me know if there is something else i need to change?

skgeosx ERR: handleRxInterrupt() - err code: 1
skgeosx ERR: handleRxInterrupt() - err code: 1
skgeosx ERR: handleRxInterrupt() - err code: 1
skgeosx ERR: handleRxInterrupt() - err code: 1
skgeosx ERR: handleRxInterrupt() - err code: 1
skgeosx ERR: handleRxInterrupt() - err code: 1

Ok, after transferring files for awhile this quit on me. I'm trying to basically move a file from one server to another and it quits on me. it will move small files but not anything of size. Also, once it quits I can't seem to get it back online without a reboot. But i don't know the OS X equivalent of /etc/init.d/networking restart?

Im not really familiar with this kext, maybe some bugs, if it doesnt work for you, you will need to buy a new one to get better support

__________________
HP Pavilion Elite m9250f
iAtkos v5i (10.5.8), Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
Macbook Pro 13"
Follow meh: @icchansan

If you just want to support hackint0sh.org with a donation click here