Hello!

After some great tips, tricks and guides found here and on the wiki - i went ahead and installed Mac OS X 10.5.2 (the Kalyway disc). Installed with no problems (to an old external USB drive from an old IDE DVD drive) and it boots just fine.

My system specs:
Aus P5LD2 SSE3 Motherboard
nVidia XFX 7600 GS 256MB Graphics card
4GB DDR2 667mhz RAM
Intel Core 2 Duo 2.0 Ghz E4400 CPU
Assortment of NFTS formatted drives

Just some problems that need to be fixed:
-Shut down gives a message with a 60-second timer. No matter what i press (even the power button on my computer) nothing happens. Shut down does not work.

-Restart does not work (neither does the restart button on the computer itself)

-Sleep makes the computer go into sleep mode (hard drives shut down, fans stop spinning etc.); but the screen stays on displaying the desktop and it won't come out of sleep mode at all (just a frozen screen - no mouse movement).

-Sound does not work. Under sound settings there is no output or input device detected. I installed the Realtek driver and ALC883 (or something similar) during installation of the Kalyway disc.

-Display Resoultion is stuck on 1024x768. My (LCD) monitor's optimum resolution is 1280x1024, but under system preferences 1024x768 is the only option there is. How can i fix this?

Solutions to the above problems would be much appreciated - sound and display resolution are the most important at the moment.

Thanks very much for any solutions and thanks for the great community!

Extra notes:
My motherboard uses a Realtek sound card (built into the motherboard).
I installed a plain 'nVinject' kext during installation.
I installed the defualt kernel as used in this http://wiki.osx86project.org/wiki/in...ualBoot_10.5.2 guide (think its the sleep kernel).

For Shutdown/Restart/Sleep there some fix, google them, try to update to 10.5.5 to get better support with it

For Video Check here

Try this for Audio

__________________
HP Pavilion Elite m9250f
iAtkos v5i (10.5.8), Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
Macbook Pro 13"
Follow meh: @icchansan

If you just want to support hackint0sh.org with a donation click here

Hello there. . . I'm still having trouble with getting ALC888/3/ whatever to work. The HCL says that I should use ALC888 for my nVidia 630i motherboard. However, I did a Linux Codec Dump and it says I have ALC883.

I've tried installing AppleHDA.kext and patching it with Taruga, as well as what seems like every other option out there. . . right now I'm bout ready to just sing all my songs instead of fussin around with this damn hell ass computer anymore. . . .

What other steps do I have to do in order to get this driver to work?

Thanks!
-Thomas

is a package theres no steps...

__________________
HP Pavilion Elite m9250f
iAtkos v5i (10.5.8), Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
Macbook Pro 13"
Follow meh: @icchansan

If you just want to support hackint0sh.org with a donation click here

OK I'm still not getting audio.

System Profiler info:
Codec Dump
I have 6 ports in the back of my computer, but I'm not sure if I should select ALC883_6ports or ALC883_6ports_Digital. ALC883_3ports is selected by default.

The package should work, right?

Did you drag the dump into the tarugas app? seems like you already have audio, check the system profile, then sound, and check the output, maybe your not using the right output

__________________
HP Pavilion Elite m9250f
iAtkos v5i (10.5.8), Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
Macbook Pro 13"
Follow meh: @icchansan

If you just want to support hackint0sh.org with a donation click here

Yep. That was my question. . . I edited my last post, and you replied while I was doing so. How do I tell which output I need? I did the Taruga patch thingey and it appeared to work, but still no sound.

put some music... and select any of the output, usually is the 1st one... if any of this work, try deleting ALCinject, APPLEHDA, HDAEnabler from the extensions... there guides for this Audio, so weird your getting this issue...

__________________
HP Pavilion Elite m9250f
iAtkos v5i (10.5.8), Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
Macbook Pro 13"
Follow meh: @icchansan

If you just want to support hackint0sh.org with a donation click here

:-( I tried iTunes, and nothing happens when I press Play. I'm going to try to delete all the files you mentioned and reinstall the ALC883Audio.mpkg.

I'll report right back with the results. Thanks so much for your help!

Nope. Still didn't work. I deleted ALCinject, APPLEHDA, and HDAEnabler from the extensions, then reinstalled ALC883Audio.mpkg, using the standard installation (ALC883_3ports) and patched my codec_dump.txt with AppleHDAPatcherv1.20.

Now in System Profiler, it says Ideas?