Hello
I have installed iDeneb 10.5.4 but I can't make it run
after installation and rebooting it only says those 3 lines
I have access to Linux and I can mount iDeneb partition to read-only or to read-write access through force command
If some additional info is needed I will try to get it

Thank You for advance

iSubaru :iphone:

EDIT #1
I figured out I should have added some more fixes like Kernel or nVidia fix but it didn't changed things... still error as above I have tried with naming partition Leopard but still no effect...maybe there is something like start disk for Mac OS??? (like there was start disk for Windows???)

EDIT #2
Oh yeah I should have post my params
CPU - AMD Athlon X2 Dual Core 4600+
RAM - 1024-256 MB
VGA - nVidia nForce with 256 MB from RAM
Sound - I have integrated AC97 sound thing but turned off and Sound Blaster PCI from old times (working )
HDD - I'm trying to install this on ATA HDD where I gave about 40 GB of space for him
Keyboard and Mouse are not that standard but connected to USB are working fine
Internet - RT73 USB Wi-Fi card

Anything else???

Sorry for double posting but I got some progress...but only some
Finally it started as should but...
It shows animation with "Welcome" in many languages, then asks for pressing two buttons on keyboard to identify it, then asks for choosing country and keyboard, then asks for transferring data from other Mac... I choose 4th option "not now" and after about 10-15 seconds of waiting it goes to animation and starts everything over...
Is there a way to skip it or make it go properly??? I tried choosing some countries but no results...

Thank You for advance once again

iSubaru :iphone:

Ok some new info...
I tried some toturial with set of fixes:
Audio - none
Chipset - AppleNForceATA
Kernel - 9.2.0 Sleep (in fact I tried almost all...)
Network - none (tried with RT73 also)
Fix - AppleSMBIOS Mac Pro
Video - NVinject 0.2.1 256 MB

It lead me to hang only...
with option -v -f on booting it says that he couldn't update something through network : success! (o_o)
and without those options it loads...loads...loads...and says that I have to restart computer...
Still no ideas??? I bet You know something I don't
I don't expect ready-to-go solve because I know it can be difficult but maybe at least some advice???

Thank You for advance

iSubaru :iphone:

Maybe u have to try with another distro, I have the same wifi, you can get the file in my tuto, good luck. Try with JaS or ideneb

__________________
HP Pavilion Elite m9250f
iAtkos v5i (10.5.8), Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
Macbook Pro 13"
Follow meh: @icchansan

If you just want to support hackint0sh.org with a donation click here

I can try... but it's not that easy for me to grab another 4 GB file - I don't have cosmic internet plus my provider is stupid because it "reboots" line every 24 hours so I gain other IP so direct downloading will fail and Torrents will go forever
Maybe there is still hope for me???
I have iDeneb v1 10.5.4 so if trying than I guess JaS...
Wait a sec...JaS is probably only for INTEL :/
I have AMD CPU

Oh AMD, then try Kalyway or leo4all well about your problem with torrent with can resume your download but it gonan take sometime XD

__________________
HP Pavilion Elite m9250f
iAtkos v5i (10.5.8), Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
Macbook Pro 13"
Follow meh: @icchansan

If you just want to support hackint0sh.org with a donation click here

Torrents are OK but it can take "some" time... I'm trying with Leo4all maybe it will go as should... I hope I will not have to collect all possible versions to make one go

Thank You for help I will post info when I will download it and try to install muhehehe

Best regards

iSubaru :iphone:

EDIT #1
Heheh 3% left...now it goes as slow as turtle...don't know why...but probably it will finish today

OK~ I have finished ^_^
Let's see it's Leo4all v4 10.5.4
Oh and this is prepared for AMD CPU only
It has Kernels for EFI and NON-EFI CPU
I have AMD Athlon x2 4600+ if that matters (but probably yes)
Should I make photos of avaiable patches???

Thank You for advance

iSubaru :iphone:

__________________
Booting Signature...Done
Booting :iphone: ...Done
Starting console ...Done
Starting freedroidRPG ...Done

Let's hack some bots :hack:

Good to hear that, yeah you make a tuto, about how to, this can help other users

__________________
HP Pavilion Elite m9250f
iAtkos v5i (10.5.8), Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
Macbook Pro 13"
Follow meh: @icchansan

If you just want to support hackint0sh.org with a donation click here

OK First thing that makes me confused is does my CPU is EFI or NON-EFI...how can I check it??? I have access to Linux and Windows through Virtual Machine if that matters
Plus which patches should I pick up??? I have SoundBlaster card RT73 USB Wi-Fi adapter nForce Graphic card...what else???

Thank You for advance

iSubaru :iphone:

__________________
Booting Signature...Done
Booting :iphone: ...Done
Starting console ...Done
Starting freedroidRPG ...Done

Let's hack some bots :hack: