If you are downloading leo4all v3 (10.5.2) then you need this one NVInstaller v.41 (10.5.0 - 10.5.2 kexts)

About the BIOS, if you follow the guide everything gonna be ok, as you can see in this list someone with the same computer already did it with my tuto

Read the comments there and you'll find a solution for BAD BIOS MOD, you can always do it on DOS or with USB LIVE XP

I flash it mine like 3 or 4 times, 1st time was with another BIOS 5.23, then I go back with the original one, 5.17 from HP then I got my own BIOS MOD, you can do it too, macnut is the hardware section he can help you with that, but you can always try with mine, its not a big deal XD

__________________
HP Pavilion Elite m9250f
iAtkos v5i (10.5.8), Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
Macbook Pro 13"
Follow meh: @icchansan

If you just want to support hackint0sh.org with a donation click here

Hi icchansan,

I hope you (or someone else) can help me.
You replied in my post here:

http://hackint0sh.org/forum/showthread.php?t=56160

So, you know my errors and issues when trying to boot Leopart iDeneb 10.5.5 in my computer, and also my PC specifications.

I was reading your post and you said you successfully installed Leopard 10.5.5 and everything working, however my motherboard and other components are different.

I have some questions:

1. What is the latest version for Leo4all and JAS? (10.5.5)?
2. If yes.. can you give me a clue on where to find them and get them?
3. Most important... a guide step by step for any of these two distros?

Well.. I'll be waiting for your (or any) response.

Thanks

1.- Latest JaS is 10.5.4, Latest Leo4all for intel is 10.5.2
2.- To find them google, your favorite torrent site or Rapidshare/
3.- Here there some guides, but they dont work for everyone as you can see, cuz the hardware, so you have to read alot and google can help you too.

Good Luck with that and keep trying, maybe your doing something wrong

__________________
HP Pavilion Elite m9250f
iAtkos v5i (10.5.8), Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
Macbook Pro 13"
Follow meh: @icchansan

If you just want to support hackint0sh.org with a donation click here

Hi ICCHAN

Thank you for your wisdom.

Another question before proceeding is about the dual boot. I have watch you video on youtube, and I see that when you want to boot OSX, you juste press <esc> and choose the right drive. You don't need any special dual boot when OSX is installed on a drive different of your Vista drive. So basically, now I have flashed my bios , yes computer still working , is follow your instruction and that's all, no need to do any dual boot if I'm installing OSX on the secondary drive. My master boot record of my vista drive, the first drive, won't get changed since I'm installing on a secondary drive?

By the way, you said the ISO MD5 checksum for LEO4all V3 is
48b3bea091a9247238b6534098e102f9 and I have seen this MD5 too.

Mine is 9d5a50fc18efeb41636ce42801fd45f3 instead
the torret is called "Leo4All-10.5.2 Universal AMD/INTEL[SSE2/SSE3]"

Did I get the right one right? There's so many, It was difficult to choose.

Again thank you very much for your help.

Yeah, I tried to dual boot like you and like everyone else in my 1st try... of coz in dat time I didnt know about easyBCD or grub stuff, so I screw vista, had to reinstall everything again and lost info, I was really MAD cuz there was useful info kekeke, anyway~ This is how is my system rite now:

1st HDD - 2 Partitions
Partition 1 -> 455 GB for Vista
Partition 2 -> 10 GB for HP Recovery

2nd HDD - 2 Partitions
Partition 1 -> 80 GB for Leopard
Partition 2 -> 385 GB for My Crap

And like you see in the video I just press ESC key and choose my secundary disk and dats it, this dont touch your Vista.

But you can always try in the main disk dual boot with easyBCD, everybody in this thread have dualboot but me XD

About your leopard, I believe that one is Leo4all v1

Tip: Just type leo4all v3 on google and you'll get lots of sites, or just go to piratebay lol, good luck

__________________
HP Pavilion Elite m9250f
iAtkos v5i (10.5.8), Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
Macbook Pro 13"
Follow meh: @icchansan

If you just want to support hackint0sh.org with a donation click here

I have installed leo4all, but the keyboard just doesn't work anymore. Didn't find anything about it on others threads. The mouse works but only if I put on a usb port.

I had trouble installing on the customize section. When I choose to installe third party drivers, the dvd test doesn't passed. When i don't choose third party then the dvd test passed.

I need the keyboard to install the wireless, video card and the sound.

Drive nuts. It worked fine on the install process. I was able to enter all the information. What's wrong?

__________________
HP Pavilion Media Center m8407c
Leo4all 10.5.2, keyboard and mice PS2, Nvidia 8500gt, 4 gig ram, Intel Q6600 core 2 duo quad, USB wifi zydas (retail brand from office depot) ALC888 sound driver.

if your keyboard is PS/2, you have to install this, using kext helper, cuz you need to enter your password, open virtual keyboard, good luck

__________________
HP Pavilion Elite m9250f
iAtkos v5i (10.5.8), Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
Macbook Pro 13"
Follow meh: @icchansan

If you just want to support hackint0sh.org with a donation click here

Hi guru Icchan

I've downloaded leo4allv3 it was the same checksum that you have gave me. I've install it and keyboard ps2 and mouse ps2 is working. I launch the NVinstaller_v41, it installs what it has to install but then ps2 support gone. I think is the kext acpisomething that's been replaced. Did this happen to you too?

I'm crazy close now

__________________
HP Pavilion Media Center m8407c
Leo4all 10.5.2, keyboard and mice PS2, Nvidia 8500gt, 4 gig ram, Intel Q6600 core 2 duo quad, USB wifi zydas (retail brand from office depot) ALC888 sound driver.

Hello,

I fixed the ps2 issue. I have to choose netKas kernel 9.2.2 on the nvinstaller and ps2 is still supported.

Something is weird thoug, you memory speed is 800 mhz, mine is 677. I know that I have 800 mhz memory, don't know what I did wrong that it didn't take 800 mhz.

Next step the wireless, I have usb wireless from Zydas.

Keep you informed. When I get internet on the mac OSX I will make print screen and posted on the forum.

Good bye

__________________
HP Pavilion Media Center m8407c
Leo4all 10.5.2, keyboard and mice PS2, Nvidia 8500gt, 4 gig ram, Intel Q6600 core 2 duo quad, USB wifi zydas (retail brand from office depot) ALC888 sound driver.

Hi everyone,

LEO4all v3 is finnaly installed and all is working very well.

Here's some capture screen of my hackint0sh

Heres the about this mac
http://picasaweb.google.ca/fanfaron/...00878610333682

The sound, it doesn't say alc888, but the sound is working fine. I didn't try the suround thoug, neither the microphone. I used the kext that ICCHAN mentionned on the tutorial. Before applying this kext I did get sound but the system did not recognized any high definition audio.
http://picasaweb.google.ca/fanfaron/...00879995516466

The hardware overview
http://picasaweb.google.ca/fanfaron/...00880257109890

The graphic, I used nvinstaller_41. As you can see on the capture screen. It doesn't say that I have the 8500gt card, just nvidia. Anyway it works fine. Don't know how to fix that. Also the mirror function is not supported don't know why, And don't know what's the mirror function.
http://picasaweb.google.ca/fanfaron/...00884249424306

All memory are supported, but only at the speed of 667. I thought I had 800. I think when I first installed leo4all v1, it says 800. But it's working fine like that and it's pretty fast.
http://picasaweb.google.ca/fanfaron/...00882472631810

My usb wireless is recognized and the software for this usb comes with the distribution. It's the Wlan with the ZD logo on the utility folder.
[http://picasaweb.google.ca/fanfaron/...01343569113490
http://picasaweb.google.ca/fanfaron/...01342828433042

I didn't install on dual boot. I have two Hard Drive, I just installed on the seconde drive and I tell the bios to boot this drive first. I did go with bios MOD.

If you have HP m8407c, it will work. All the instructions are on this thread, thank you ICCHAN.

Why the IMG tag is not working


[IMG]http://picasaweb.google.ca/fanfaron/...00878610333682[/IMG]

__________________
HP Pavilion Media Center m8407c
Leo4all 10.5.2, keyboard and mice PS2, Nvidia 8500gt, 4 gig ram, Intel Q6600 core 2 duo quad, USB wifi zydas (retail brand from office depot) ALC888 sound driver.