Warning: Since This solution has been released we have seen an increase of bricked iPhones help request in the forum. This may also result in "greyed wifi" or "greyed Bluetooth", BSD minor major error, corrupted baseband and/or bootloader. Use at your own risk !

[Warning] Use ZiPhone at your own Risk > Big WiFi issue !!!

This guide are for every iPhone versions.
After finishing this guide you are going to have an iPhone with 100% 1.1.3-fuctionality.


PART 1/4


A) PREPARATIONS
Download and install the latest version of iTunes (7.6):
iTunes 7.6 Win - iTunes 7.6 Mac

Remove the PIN-code on your own sim-card using a "traditional" celluar phone.
Put your own sim-card in iPhone.

Before starting:
- use usb-cable directly in iPhone, don't use the iPhone dock (easier using only the cable)
- uninstall ALL applications and Sources in Installer....



B) UPDATE / RESTORE iPHONE to the LAST FIRMWARE-VERSION
There are two reasons for running through an update/restore in iTunes.
First for updating to the lastest baseband (04.03.13_G),
secondly because ZiPhone "demands" that iPhone are "paired" with iTunes.
(for OTB 1.1.3 the restore is for "pairing" with iTunes, it has already baseband 04.03.13_G)

- connect iPhone to the computer w/usb-cable
- start iTunes
- turn on iPhone, wait until iTunes recognize iPhone
- click Check, click OK

Now you must choose one of 3 choices in iTunes (it depends in what condition/firmware the iPhone is in right now)
a) if button Check for Update is active (ie. not dimmed):
- click Check for Update, click OK (if iTunes say that you have the latest version continue nevertheless to the next line)
- click Restore, click Check, click Restore, wait.... continue with B2

b) if only button Restore is active (ie. if buttons Update or Check for Update are dimmed):
- click Restore, click Check, click Restore and Update, wait.... continue with B2

c) if both buttons Update and Restore are active:
- click Update, click Check, wait.... continue with B2

B2 - Finish and quit iTunes
After the update/restore is finished (4-5 min.):
- wait until iTunes recognize iPhone, ignore error messages regarding non-supported SIM-card
- click iPhone's eject-icon in the left panel (in iTunes)
- quit iTunes
iPhone-display is showing "slide for emergency" over a picture of a usb-kabel --> iTunes-icon
- reboot iPhone (hold on/off-button for 5 sec), slide "slide to power off" to the right

-

__________________
iMac 24" * MacBook Pro 17" * iPod Classic 160Gb * iPhone 8Gb * iPhone 16Gb

PART 2/4


C1) RUNNING ZiPHONE in WINDOWS
Hint: right-click download link in the browser and choose "Save As...".

Download ziPhone for Win and extract zip-file to the desktop (folder ziphone).
(replace the $ in the download link with S)

Open folder ZiPhone on desktop.
- connect iPhone to the PC w/usb-cable (it should be that already)
- turn on iPhone (if iTunes is starting then quit iTunes)

Doubleclick ziphoneGUI.exe.

Depending of which version the iPhone
was originally (when you bought it) you have 2 choices (you shall only choose one of them):

a) iPhone that originally was a OTB 1.0.2 or OTB 1.1.1

1) mark/choose Unlock, Activate, Jailbreak
2) click START, wait about 2-3 min. (watch the magic scrolling down the iPhone display)
3) when you see "slide to unlock" on iPhone click Quit
4) on iPhone: slide "slide to unlock" to the right, click Dismiss
5) continue the guide with D.
An OTB 1.0.2 / 1.1.1 are now an activated, jailbroken and unlocked iPhone!!
(Bootloader 3.9 / Baseband 04.03.13_G / Firmware 1.1.3)

b) iPhone that originally was a OTB 1.1.2 or OTB 1.1.3

1) mark/choose Unlock, Activate, Jailbreak, Downgrade bootloader...
2) click START, wait about 2-3 min. (watch the magic scrolling down the iPhone display)
3) when you see "slide to unlock" on iPhone click Quit
4) on iPhone: slide "slide to unlock" to the right, click Dismiss
5) continue the guide with D.
An OTB 1.1.2 / 1.1.3 are now an activated, jailbroken and unlocked iPhone!!
(Bootloader 3.9 / Baseband 04.03.13_G / Firmware 1.1.3)

-

__________________
iMac 24" * MacBook Pro 17" * iPod Classic 160Gb * iPhone 8Gb * iPhone 16Gb

PART 3/4


C2) RUNNING ZiPHONE on MAC
Here you MUST run Leopard (this doesn't work in Tiger)

Download ziPhone for Mac and extract zip-file to the desktop (application ZiPhone).
(replace the $ in the download link with S)

- connect iPhone to the Mac w/usb-cable (it should be that already)
- turn on iPhone (if iTunes is starting then quit iTunes - don't close)

Depending of which version the iPhone
was originally (when you bought it) you have 2 choices (you shall only choose one of them):

a) iPhone that originally was a OTB 1.0.2 or OTB 1.1.1

(gui is showing "Unlock (Only for 4.6 BL)", this is a bug in the gui, it works also for 3.9 BL)
1) mark/choose Jailbreak, Activate, Unlock
2) click START, wait about 2-3 min. (watch the magic scrolling down the iPhone display)
3) when you see "slide to unlock" on iPhone click Quit
4) on iPhone: slide "slide to unlock" to the right, click Dismiss
5) continue the guide with D (quit iTunes - configuration takes place under E2).
An OTB 1.0.2 / 1.1.1 are now an activated, jailbroken and unlocked iPhone!!
(Bootloader 3.9 / Baseband 04.03.13_G / Firmware 1.1.3)

b) iPhone that originally was a OTB 1.1.2 or OTB 1.1.3

1) mark/choose Downgrade 4.6 BL to 3.9
2) click START, wait about 2-3 min. (watch the magic scrolling down the iPhone display)

THEN continue with this:


3) mark/choose Jailbreak, Activate, Unlock
4) click START, wait about 2-3 min. (watch the magic scrolling down the iPhone display)
5) when you see "slide to unlock" on iPhone click Quit
6) on iPhone: slide "slide to unlock" to the right, click Dismiss
7) continue the guide with D (quit iTunes - configuration takes place under E2).
An OTB 1.1.2 / 1.1.3 are now an activated, jailbroken and unlocked iPhone!!
(Bootloader 3.9 / Baseband 04.03.13_G / Firmware 1.1.3)

-

__________________
iMac 24" * MacBook Pro 17" * iPod Classic 160Gb * iPhone 8Gb * iPhone 16Gb

PART 4/4

D) INSTALL NECESSARY APPLICATIONS
If you don't see the Wi-Fi icon on the statusbar then do the following:
- click Settings-icon on iPhone, click Wi-Fi,
-- click the name of your Wi-Fi network, write password, click Join
-- click home-button

- click Installer-icon on iPhone (if asked update Installer)
- click Sources-icon, click Refresh (upper left), wait a little...
- if Update-icon has a red number,
-- click Update-icon, click Update All, wait a little..., click OK
- click Install-icon, scroll down and click Sources,
-- click Community Sources, click Install, click Install, wait a little..., click OK
(if you don't see Community Sources here, then it's already installed)
- click Install-icon, scroll down and click System,
-- click BSD Subsystem, click Install, click Install, wait a little...
--- notice the warning regarding the password change, click OK, wait a little...
-- scroll down and click System
-- scroll down and click OpenSSH, click Install, click Install, wait.., click OK
- click home-button, slide "slide to unlock" to the right
- reboot iPhone (hold on/off-button for 5 sec), slide "slide to power off" to the right
- turn on iPhone (hold on/off-button for 2 sec)



E) SUPPLEMENTARY WORK AFTER 113 UPGRADE
E1) Set correct timezone
- click Settings-icon on iPhone, click General,
-- click Date & Time, click 24-Hour Time/OFF to ON,
-- click Set Automatically/OFF, click Time Zone,
-- click X (upper right), write & click the name of the capital of your country
(now time/date will be set automatically)
-- click Set Automatically (ON)
-- click Time Zone (under Calendar), click X (upper right),
-- write & click the name of the capital of your country
- click home-button

E2) Link iTunes Store-account with iPhone
- connect iPhone to the computer with usb-cable
- start iTunes, wait..., write the name for your iPhone
-- iTunes: untick "Automatically sync contacts, calendars...", click Done
- iTunes: untick "Options / Automatically sync when this iPhone is connected"
- iTunes: untick all sync-options in all categories (tabs)
- iTunes: return to the Summary-category/tab, click Apply
- iTunes: click iPhone's eject-icon in the left panel
- quit iTunes



F) MAKE SPACE: MOVE the FONT folder
Moving the Font folder for releasing more space on the system partition is essential.
After moving the Font folder, you will have more enough space to install
plenty applications, so it shouldn't be necessary to move the Application folder.
(this source is from Norway using some norwegian language, but I'll guide you...)

- click Settings-icon on iPhone, click General, click Auto-Lock, click Never
- click home-button
- click Installer-icon on iPhone
- click Sources-icon, click Edit (upper right), click Add (upper left)
-- write http://install.ifon.no, click OK, wait a little..., click Done (upper right)
- click Install-icon, scroll down and click iFon Public Beta,
-- click "Jeg er Beta Tester hos...", click Install, click Add to Queue
-- click "Flytt Font Mappen", click Install, click Install
-- click Yes, click Yes, click OK, wait a minute..., click OK
- click Uninstall-ikon, click "Jeg er Beta Tester hos...",
-- click Uninstall, click Uninstall, click Yes, click OK
- click home-button, slide "slide to unlock" to the right
- reboot iPhone (hold on/off-button for 5 sec), slide "slide to power off" to the right
- turn on iPhone (hold on/off-button for 2 sec)



G) SOLVING PROBLEMS

Help, after running ziPhone iPhone still shows "slide for emergency"
Run ziPhone again, but this time mark/choose ONLY these 2 choices:
Activate and Jailbreak


Help, I have problem with Mail, it doesn't work as it should
- click Installer-icon on iPhone,
- click Install-ikon, scroll down and click iClarified,
-- scroll down and click Syncfix, click Install, click Install, wait a little...
- click home-button, slide "slide to unlock" to the right
- reboot iPhone (hold on/off-button for 5 sec), slide "slide to power off" to the right
- turn on iPhone (hold on/off-button for 2 sec)


Help, Wi-Fi doesn't work
- click Installer-icon on iPhone,
- click Install-icon, scroll down and click Utilities,
-- scroll down and click BossPrefs, click Install, click Install, wait a little...
- click home-button, slide "slide to unlock" to the right
- click BossPrefs-icon on iPhone,
- WiFi: click ON (ie. you turn it off), wait a little, click ON again


Help, EDGE doesn't work
- click Installer-icon on iPhone,
- click Install-icon, scroll down and click Utilities,
-- scroll down and click BossPrefs, click Install, click Install, wait a little...
- click home-button, slide "slide to unlock" to the right
- click BossPrefs-icon on iPhone,
(if gui shows that Wifi is off, even if you see the Wi-Fi-icon on the statusbar: click ON)
- Edge: click ON (ie. you turn it off), wait a little, click ON again
If you now wish that EDGE shall always be turned off: click ON (ie. you turn off to OFF)


Help, I have 300Mb under Other in iTunes
This is a bug in the latest version of iTunes - nothing to worry about.


Help, iTunes don't let me continue - nagging about wrong SIM-card
- put the sim-card that came with iPhone in the iPhone
- put your sim-card in iPhone before you start running ziPhone.


Help, iTunes showing error (1603)
Restart computer and start over.


Help, there are no sound coming out of iPhone
- click Settings-icon on iPhone, click General,
-- scroll down and click Reset, click Reset All Settings, click Reset All Settings
iPhone will reboot automatically.
After this you must log on to your Wi-Fi network again.


Help, it seems like iPhone is not fully jailbreaked
- click Installer-icon on iPhone
- click Sources-icon, click Edit (upper right), click Add (upper left)
-- write http://i.unlock.no, click OK, wait a little..., click Done (upper right)
- click Install-icon, scroll down and click Unlocking Tools,
-- scroll down and click ZiPhone iBrickr Fix, click Install , click Install, wait a little...
- click home-button, slide "slide to unlock" to the right
- reboot iPhone (hold on/off-button for 5 sec), slide "slide to power off" to the right
- turn on iPhone (hold on/off-button for 2 sec)


Help, I don't get any signal from my provider - calling doesn't function
First try this:
- click Settings-icon on iPhone, click General,
-- scroll down and click Reset, click Reset All Settings, click Reset All Settings
iPhone will reboot automatically.
(after this you must log on to your Wi-Fi network again)
It that didn't solve your problem:
If you have an older iPhone OTB 1.0.2 (or OTB 1.1.1)
and don't know or are unsure what earlier unlocking method that was
used for unlocking your iPhone (ie. older versions of anySIM, unlock.app, ....),
then you must virginize your iPhone following this guide:
How to "Virginize" the iPhone to repair the baseband?


Now there is no need to use a x-simcard (StealtSIM, TurboSIM, ....)



-

__________________
iMac 24" * MacBook Pro 17" * iPod Classic 160Gb * iPhone 8Gb * iPhone 16Gb

Great, another guide........

What's with the Donate button????

__________________
3G 16

donate????? wtf....

__________________
- n+ unlocked phones

Can't a guy ask for a little money for making a guide, I see nothing wrong with it.

I don't think this forum was meant for that, correct if i'm wrong!?

__________________
3G 16

Don't see why not.. Good job, nice guide..

putting a paypal button is pretty lame.
he did great with the guide but then to ask for donations is pathetic.
he gets 2 thumbs down