Well, the iPhone Dev Team and Iphone Elite Team has done it again, now together. A working jailbreak for 1.1.3 is finally here.

This jailbreak, like the 1.1.2 jailbreak, comes as an upgrade. This means you need to have a 1.1.1 or 1.1.2 jailbroken phone already, before you can begin.

Right now there's only a Windows iBrickr-based version of the image creator .
Here's how you do it:
- Start with a 1.1.1 or 1.1.2 jailbroken phone with Installer.app installed.
- Plug in your phone via USB to your computer.
- Download, extract, and run iBrickr Special 1.1.3 jailbreak edition ( http://devices.natetrue.com/iphone/ibrickr-jb113.zip )(ibrickr.exe in the archive).
- iBrickr will determine what firmware you are running on your phone and make sure you can run the update.
- iBrickr will then guide you through the process of obtaining and modifying the 1.1.3 firmware (make sure to read everything thoroughly).
- iBrickr will upload the new firmware image to your phone. Note that this only puts the file on your phone and does not modify it at all, yet.
- When iBrickr finishes (should take about 10 minutes), it will tell you to go to Installer and install the "1.1.3 soft upgrade" package. Do that.
- When the installer finishes (this should take another 10-15 minutes), your phone should reboot with a fresh activated 1.1.3 firmware.


Props to everyone on the Dev Team, including (in no particular order): netkas, NerveGas, asap18, bgm, Bugout, bushing, chris_, dinopio, drudge, Fred_, gray, MuscleNerd, natetrue, pr3d4t0r, roxfan, Turbo, Zf[strike], np101137, pumpkin, and kroo, along with many contributors who wish to remain anonymous.

And props to planetbeing, who was the first person with a 1.1.3 jailbroken iphone, and Zibri, by whom this method was largely developed. Additionally to Shaun Erickson, who packaged the Installer half of the upgrade, and runs most of the application packaging for the iPhone. He's looking for a job too - hire him!


Now you may be wondering how this jailbreak works. Here's a breakdown:

- iBrickr grabs the 1.1.3 iPhone firmware image and extracts, decrypts, and decompresses the disk image.
- Then it applies a patch, jailbreaking the disk image and activating it, and also installing Installer.app.
- It uploads this new modified image to the phone, as 113_upgrade_image.bin.
- The "1.1.3 soft upgrade" app flashes the phone with the image and reboots.
- You have a perfect, jailbroken, upgraded 1.1.3 phone, with all your settings and music intact!

If u meet Zibri, say him big thanks for all his hard work on 1.1.3 jailbreak.


[EDIT]
There is a tutorial for this with pictures.
PC:
http://www.iclarified.com/entry/index.php?enid=604

Mac:
http://www.iclarified.com/entry/index.php?enid=606
[/EDIT]

Please can someone make a FAQ with the answers of all interesting questions. Cheers.

What about the unlock?

__________________
hardware unlocked

Great! Thank u all! I will try it tommorow, also test with my SuperSim. Thank u again.

will test it out as soon as i get home...in 1 hour! thanks upgrading from 1.1.1 to 1.1.3

Thanks so much to you all!

__________________
If you found a friend, you found a treasure.

Just to confirm, i just follow the instructions in the thread and i can update my jailbroken OTB 1.1.2 phone. Phoning and wifi will work?

If a software unlock for 1.1.2 comes out will i be able to go back to 1.1.2 as i really want to unlock the phone, thats more important than the extra things 1.1.3 adds.

Any news on a 1.1.2/1.1.3 software unlock netkas?

Thanks alot guys for all the hard work, will try this thing out as soon as I know if it works with StealthSim.

I won't forget to donate for all the hard work!

Thanks again!

__________________
// smash

reports from #iphone confirm that 1.1.2 anysim unlock sticks... should be the same for 1.1.1 anysim 1.1

if u have unlocked 1.1.1 or 1.1.2 it will still unlocked

__________________
iPhone 4GB [1.0.2 OTB]
3.0.1 Bootneutered and Redsn0wed

3 observations:

1. this deletes all your 3rd party apps and JUST installs Installer.
2. EDGE setting wont stick at all, meaning i can type in optus.wap and it'll crash the settings.app
3. HyperCard still works!

other than that - seems to work ok