Hi guys,

Here is another ultimate guide for the benifit of the community Special thanks to conceited software, tauw and all the others who worked on getting this working

Guide: (UPDATED Nov 16th) (Look at step 6 first before doing anything)

What files do I need?

- Jailbreak Software 1.1.2 (NEW VERSION)

- iPhone 1.1.1. firmware file (optional)
- iPhone Firmware v1.1.2 (optional)


1.1.2 Jailbreak (Updated)

**** NOTE: This method currently requires you be on 1.1.1 of the firmware. If you are on 1.1.2
you must downgrade prior to being able to use this jailbreak. ****


Updates:
- Activation/YouTube for iPhones
- Added an automatic fix for SpringBoard crash problem on touches
- PPC support
- Some improvements to crossplatform compatibility



Step 1: Downgrade to 1.1.1 (if required)
*** NOTE: This guide does not guarantee it will work 100%. Also errors 1015 is expected at
the end of the process. Continue reading to understand. ***

1. Download the 1.1.1 ipsw firmware file from Apple. If the downloaded file has the extension
".zip", please remove it and modify it to end up with a filename ending in _Restore.ipsw

2. Reboot your iPhone holding the top (power) and home buttons BUT release the top button 10
seconds into it (right after the screen goes dark) and continue to hold the home button until
iTunes detects the phone in recovery mode. The iPhone screen will appear to be off, but start
iTunes if not started yet .

3. Restore your iPhone by pressing and holding the ‘Shift’ key on windows or ‘option’ key on Mac,
then click ‘restore’ to select the 1.1.1 firmware file you downloaded earlier. The restore should
go through and errors at the end with error 1015. However you will notice that the iphone is in
DFU mode with the connect to itunes screen from 1.1.1.

4. In order to kick the phone out of that mode I just had to launch iNdependence version 1.2.5
and wait a minute or so. If you are using iTunes 7.5 you will have to get a MobileDevice from a
previousv version in order to run Independence.

- If iNdependence is not available or you are on a Windows machine, download a working copy of
iPhuc and issue the following commands:
cmd setenv auto-boot true
cmd saveenv
cmd fsboot

----------------------------------------------------------------------------------------------------

Step 2a: Jailbreak 1.1.1 on Unactivated iPhone
*** NOTE: If your phone has been activated through iTunes, you can proceed to step 2b. ***

1. enter *#307# press call, now use the back button on the top of your screen to remove *#307# ,
now enter 0 , press call, press answer, press hold, press decline. And you get to the contact
list. And thereafter every time you push the homebutton you just slide the "emergency call"
slide, then enter 0 , press call, press hold, press decline.

2. Push contacts, end call and you get called again, this time hit decline and you access one of
menus with favorites, you can edit contacts, do a test ride on keyboard, take photos etc.

3. Now edit a new contact and type in "prefs://11" as web-address and "http://jailbreakme.com" as
an additional URL.

4. When you tap "prefs://11" you can now select your favorite WiFi gateway.

5. Now press the home button and move the slider to the dial-pad.

6. Now you can go back to the contact list by Dialing 0, push call, then answer, then contacts,
then hit the "http://jailbreakme.com" web address you typed in.

7. Scroll down to the bottom, click "Install AppSnapp". Safari will exit and you'll return to your
springboard. Wait for the phone to reboot. You are now jailbroken. and are able to use
Installer.app.

----------------------------------------------------------------------------------------------------

Step 2b: Jailbreaking on iPod Touch or iTunes Activated iPhone

1. Launch Safari

2. Visit http://jailbreakme.com, Scroll down to the bottom, click "Install AppSnapp". Safari will
exit and you'll return to your springboard. Slide to unlock, you are now jailbroken. and are
able to use Installer.app.

----------------------------------------------------------------------------------------------------

Step 3: Prepare your 1.1.1 device for the Update

1. Launch Installer.app

2. Scroll down to Tweaks (1.1.1)

3. Select OktoPrep

4. Click Install

----------------------------------------------------------------------------------------------------

Step 3b: Prevent SpringBoard crash on previous hacked iPod touches

If you have installed MobileMail on your iPod touch, there is a chance an update to 1.1.2 will
render your device inoperable until a restore. This issue can be prevented by switching Auto-Check
off.

- Go to General->Mail->Auto-Check. Set it to Manual.

If you forget to do this step and update, proceed with the jailbreak in step 5 (even though
SpringBoard is unusable) and we will fix it for you.

----------------------------------------------------------------------------------------------------

Step 4: Update to 1.1.2

1. Connect your device to your computer

2. Launch iTunes

3. Choose your device

4. Click Update
- If update still shows 1.1.1 as being the newest version, you may download the 1.1.2 from an
Apple download server and shift-click (PC) or option-click (Mac) on "Check for update" and
select the update you downloaded.

- DO NOT CLICK OR SHIFT-CLICK RESTORE: That will wipe the changes OktoPrep made.

5. Wait forever for your device to update

----------------------------------------------------------------------------------------------------

Step 5: Jailbreak your iPod Touch or iPhone

WARNING: If your iPhone is unactivated, it will be factory "hactivated" for you and YouTube enabled.
If this is not desired behavior, activate your iPhone with iTunes before proceeding.

1. Close iTunes

2. Connect your device to your computer

3. On Windows, double click on windows.bat, on Mac, double click on jailbreak.jar

4. Follow the on screen instructions.

----------------------------------------------------------------------------------------------------

Step 6: Unlocking 1.1.2

Note:

# This version of anySIM works only with 4.02.13_G baseband version and can be run on 1.0.2, or 1.1.1 jailbroken systems

* The only way your baseband will be 4.02.13_G while you're running 1.0.2 or 1.1.1 is if you updated then downgraded firmware.


1) Start at 1.0.2 or 1.1.1 or 1.1.2, do a fresh 1.1.2 RESTORE
This will load the new baseband firmware.

2) Now, RESTORE (downgrade) first to 1.1.1 and then to 1.0.2.
This will not alter the baseband firmware, so it will still be the 1.1.2 version

3) Now on 1.0.2, jailbreak and install anySIM 1.2.1u

4) Run anySIM 1.2.1u to unlock the phone. Although you are running fw 1.0.2 with a 1.1.2 baseband, the phone will work.

5) Now RESTORE to 1.1.1 again

6) Do a jailbreakme.com and use installer to fetch and run OktoPrep

7) Now do an UPDATE (not restore) to 1.1.2.

If you restore instead of updating then oktoprep is wiped out and you need to redo the steps.

8) Run the UPDATED jailbreak software.


DO NOT RUN anySIM 1.2 under 1.1.2. It will not work properly and you risk corrupting your baseband.

Enjoy!

__________________

All my guides: http://www.haklabs.com/

Frequently Asked Questions :

1. when i click on windows.bat, the terminal opens and closes.

Install Java Runtime

2. How do I activate the phone if I am not on ATT?

the new jailbreak software does this automatically.

__________________

All my guides: http://www.haklabs.com/

Hey

Im going to try this out soon!

also, dont you mean prefs://1F and not prefs://11


Whats the guarantee this will work assuming that 1.2 is not part of Dev's Team but the Elite ones?

I have unlocked my v1.1.1 phone this way so it will work for you as well.

Going to upload some screenshots soon (of the phone).

__________________

All my guides: http://www.haklabs.com/

its official iphone 1.1.2 jailbreak is here
http://www.tuaw.com/2007/11/11/1-1-2...ware-released/

Download the software @ the top of the guide and follow the instructions!!!

Correct

__________________

All my guides: http://www.haklabs.com/

But that guide function on uk iphone?

I thought this only worked with activated on iTunes?

no news on UK versions

__________________

All my guides: http://www.haklabs.com/

What's the definition of activated on iTunes?

Does that mean jailbroken?

And when you mean unlocked does that mean if i update my US bought iPhone that is unlocked right now with AnySim. It will actually be SIM unlocked too, so I can carry on using it as a phone?


Thanks for the help