Ok, u have Windows, an unlocked 1.0.2 iPhone and u want to have an unlocked 1.1.1 iPhone? This is guide for YOU!

Proceed at your own risk!

Also proceed only if U have an unlocked 1.0.2 iPhone with ANY method except IPSF, and u need to have SSH, and BSD Subsystem installed(if U dont have it ,install it via Installer) + I reccomend STRONG Wi-Fi SIGNAL! If U get disconnected while executing commands bad things can happen!

CONNECT IPHONE via USB or dock to PC! And Good Luck from Croatia!




1. ::Virginize your iPhone::

How to "Virginize" your phone(from i.unlock.no)

Run Installer on your iPhone. Update Installer to latest version, tap on Sources, Edit, and Add http://i.unlock.no/ as a repository. Make sure you have BSD Subsystem installed, if not you'll find it in the System category. Then install Virginize Script found in the Unlocking Tools category. This will take about 3-5 minutes to complete. Warning: This script is not well tested so i give no warranty. Only use if you never updated to 1.1.1 before! (that means, don't use if your baseband firmware is 04.01.13_G).


2. ::Updating to 1.1.1 and unlocking::

By now U should have an Virgin 1.0.2 iPhone. Open iTunes and update iPhone to 1.1.1. When its done u will be at the activation screen,good.


::Jailbreaking 1.1.1::

This is the easiest method for now i think, watch HOW TO video below(Thanx to Mark) - http://www.youtube.com/watch?v=-l2T9dlhhxc




3.::Unlocking 1.1.1::

1. Launch Installer,update Installer, install Community Sources, install BSDSubsystem and then install OpenSSH.

2. Press the Sources button at the bottom of the Installer. Then press the Edit button

3. Press Add, then enter i.unlock.no then presss OK. Installer will refresh its sources list. Press Done

4. Press Refresh. Now you'll see the folder Unlocking tools is associated with the i.unlock.no website.

5. Press the Install button and scroll down to the Unlocking tools folder and press it. Now press AnySIM

6. Press the Install button on the top right corner.

7. Press the Home button to relaunch the SpringBoard. You need to do this after every application you install. You should now see the anySIM application icon. Tap on it to run it,when it finish, Boom! U're unlocked!

8. To remove anySIM launch the Installer. Press the Uninstall button at the bottom. A list will appear showing all the packages you have used Installer to put on your iPhone. Press AnySIM. At the next screen press the Uninstall button in the top right corner.




::YouTube::

AppSnapp was updated so YouTube should working now after jailbreakme.com, if its not working try this:

I enabled YouTube like on 1.0.2. Download this three files http://r_apidshare.com/files/4905491...iles1.zip.html

upload them(overwrite orginals,make backups just in case) via WinSCP to /private/var/root/Library/Lockdownd

Reboot....if its not working for U, try find another way in forum.

thanx to all....

__________________
..::First unlocked 1.0.2 iPhone in the World ,with SuperSim!, now having 3G 3.0 16GB::..

Thanks for posting this, because it will help a lot of people. Is this really necessary though-- all this "virginizing" stuff? I've worked hard to get my phone the way I like it. Am I seriously going to have to start from scratch and re-unlock everything EACH time apple releases an update?

Isn't there some way I can just apply a modified update file that obviates the whole virginizing process? Please?

Whne I type "launchctl unload -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist" in Putty why does it say no Such Process?

U made a mistake somewhere, i can confirm that this is working, i unlocked 4 iphones following this, thats why i share it.

__________________
..::First unlocked 1.0.2 iPhone in the World ,with SuperSim!, now having 3G 3.0 16GB::..

./bbupdate -e ICE03.14.08_G.eep -f ICE03.14.08_G.fls

I typed that and it gives me No SUCH FILE or directory : ./bbupdater


what am i doign wrong?

Do you think steps 1 and 2 will be available in a 1-click app somewhere next week or so? It seems to me that most of those commands could be made into an app, as the "official" IPSF does almost the same thing, right?

So that way people that aren't in a hurry to get to 1.1.1 could wait a bit longer and they'd only have to do the activation and unlock steps, right?

Sassha,

Please a simple question. If I have a "unknown unlock method 1.0.2" then went to 1.1.1 updated bricked and locked ... what's the next recomended step for me? Re-Virginze it to 1.0.2 ( http://hackint0sh.org/forum/showthread.php?t=12052 )and then follow unlock method here ( http://hackint0sh.org/forum/showthread.php?t=11920 )or just downgrade to 1.0.2 and do your method? It is not that I'm not confident on your method but I don't know what method was used to unlock my phone, I received as a gift...

Your method looks a very easy!!

Thanks

This is a little bit confussing for me... is it revirginezed AND unlocked? how is that?

OK, this is my third time doing this and its doing the same thing.

I copied "flash" folder using WinSCP

I type cd /flash

the type:
launchctl unload -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist

it says no such Process

then i typed
./ieraser

it did its thing...

then it said waitng for next step

i Typed "./bbupdate -e ICE03.14.08_G.eep -f ICE03.14.08_G.fls"

it said "No SUCH FILE or directory : ./bbupdater"

Now phone doesn't work
My wifi works
what do I do?

UI followed Step by Step so far.

Tell me where I made a Mistake?

I need help ASAP

I rebooted the iphone
NOW it's Just Stuck on restore mode.
I followed your instructions step by step.
I already posted in above exactly what I did.
So I don't understand what mistatke i made that you claim i made.
I opnly did what you posted.

What do I do now?

any suggestions?

Do you even know?