[1G - NOT 3G] "Unlock" your iPhone with SuperSim - Page 62

freeknow · #**611** (**permalink**) 12-11-2007, 01:39 PM

Quote:

Originally Posted by nts1986

it's working on 1.1.2 ?

like Sassha says, yes OTB 1.1.2

freeknow · #**612** (**permalink**) 12-11-2007, 01:41 PM

Quote:

Originally Posted by tassador

is it possible to know what type of sim do i have? i got iz 5 yr. ago and it stores up to 10 sms and 100+ contact numbers...i'm assuming it's v1

google is your friend try search the name of your mobile operator or try to extract the ki like explained on the first page of this post!

xjustx · #**613** (**permalink**) 12-12-2007, 10:10 AM

anybody got this to work with a regular serial phoenix programmer ?

Cheff · #**614** (**permalink**) 12-12-2007, 04:18 PM

Hey, i have a little problem here trying this. I took the SIM, my carriers SIM

(looks like this)

Anyway, i tried to get imsi and icc id with woron, i can't it says "Simulator is ready". and does nohting else....
And if i search KI, i only get 0's, once i got something else like this "00 00 00 00 00 00 0B 0C 0C 0C 0C 0C 0C 0C 0C 0A" (changed a few) but basically it. and if i used anohter app, i got ICC and IMSI (16 numbers... not 18) SIM-EMU says it has to be 18... I have USB reader (velleman Super GSM Reader) and SIM-EMU says " no card inserted" tho it is.. can someone help?

And another question, can i i use some old SIM, or a pay-by-go sim, to create a superSIM. or do i need a really blankone like Silvercard?

Nightlord · #**615** (**permalink**) 12-12-2007, 07:25 PM

Hi,

Does this work with a regular SIM-EMU 6.00 or 6.01?

I'm asking this because I have 2 Silvercards at home, one with SIM-EMU 6.00 and the other with SIM-EMU 6.01.

I already have the IMSI, ICC and Ki of my SIM card. I also have a SIM Master (http://ucables.com/ref/SIM-MASTER) which I used to extract those codes. I think I'll be able to get the IMSI of the O2 sim (I'm planning to buy an UK iPhone) with these device and SIM-BACKUP software.

Do I need anything else? Can I input all those codes directly on the SIM-EMU menu on a regular phone instead of using "Sim-Emu 6.01 Configurator v2.1"?

Thank you,

freeknow · #**616** (**permalink**) 12-13-2007, 10:16 AM

Quote:

Originally Posted by xjustx

anybody got this to work with a regular serial phoenix programmer ?

you've to use a serial programmer, and yes it's working!
follow the first page of this post!

freeknow · #**617** (**permalink**) 12-13-2007, 10:21 AM

Quote:

Originally Posted by Cheff

Hey, i have a little problem here trying this. I took the SIM, my carriers SIM

(looks like this)

Anyway, i tried to get imsi and icc id with woron, i can't it says "Simulator is ready". and does nohting else....
And if i search KI, i only get 0's, once i got something else like this "00 00 00 00 00 00 0B 0C 0C 0C 0C 0C 0C 0C 0C 0A" (changed a few) but basically it. and if i used anohter app, i got ICC and IMSI (16 numbers... not 18) SIM-EMU says it has to be 18... I have USB reader (velleman Super GSM Reader) and SIM-EMU says " no card inserted" tho it is.. can someone help?

And another question, can i i use some old SIM, or a pay-by-go sim, to create a superSIM. or do i need a really blankone like Silvercard?

try using a phoenix programmer or a smart mouse programmer both serial!!

no, you can't use an old sim or anything else to create a super sim,
they are not writable the way a silvercard is!
you need a silver (16F876/7 + 24C64) or green card (16F876/7 + 24C128) or green card 2 (16F876/7 + 24C256)!

freeknow · #**618** (**permalink**) 12-13-2007, 10:45 AM

Quote:

Originally Posted by Nightlord

Hi,
Does this work with a regular SIM-EMU 6.00 or 6.01?

I'm asking this because I have 2 Silvercards at home, one with SIM-EMU 6.00 and the other with SIM-EMU 6.01.

i believe there's no problem with 6.00 or 6.01, try, at least update to 6.01!

follow these instructions!

Quote:

Originally Posted by Sassha

1. Download & extract - http://www.rapid_share.com/files/474..._u1.rar(Remove dash "-")
1.a Put your Silvercard in programer
2. Run Sim-Emu 6.01 Configurator v2.1
3. Click on Configure tab
4. Click "Read from disk" button
5. Browse to your downloaded Flash&EEPROM files, first double click on SIM_EMU_6.01_iphone_u1.HEX and then double click on SIM_EMU_6.01_iphone_u1_EP.HEX, now they are loaded,positions 0 and 9 are red colored,thats fine.

6. In position 0 , type in data which u got from your carrier SIM with Woronscan - IMSI,Ki & ICCID!
For ADN/SMS/FDN# type 161, 15, 4, for SMS Centre type in your carrier SMS center number.

7. Now select position "9", here type IMSI from O2 card (thgat came with your new iPhone) ,and PIN1 ,PUK1 same like in position "0" ,NOTHING ELSE!
8. In "Config mode" check "Files" circle check button
9. Click on "Write to disk" button,u'll be asked to save new created SuperSim Flash&Eeprom files,Save it!
10. Write those NEW created Flash&Eeprom files on Silvercard with your programer software!

Quote:

Originally Posted by Nightlord

Do I need anything else? Can I input all those codes directly on the SIM-EMU menu on a regular phone instead of using "Sim-Emu 6.01 Configurator v2.1"?

Thank you,

you can, but it's more confortable with the "Sim-Emu 6.01 Configurator v2.1"!!
use a normal phone like nokia, check this!

clear?

fundidor · #**619** (**permalink**) 12-13-2007, 02:49 PM

Hi friends from this thread!

I have for the last week read most of the 62 pages of this thread.

I have been selling iPhones in my country and am stuck with 13 pieces I can not unlock.

After reading this thread it seems to me that the whole Super-Sim-Cloning solution lies on obtaining the "Ki number" from a SIM Card.

Here is my big question:

Lets say I had a brother working in a local mobile telephone company, and he would be willing to give me the brand new SIM Cards along with the KI numbers, would this be all that I need to be able to clone SIM cards and sell my iphones away?

Thanks a lot!

Greetings from south america!

hcint-fromi2ch · #**620** (**permalink**) 12-13-2007, 04:10 PM

Quote:

Originally Posted by freeknow

try using a phoenix programmer or a smart mouse programmer both serial!!

I have an Infinity USB Phoenix programmer, serially connected on a COM port.
Unfortunately it is NOT working for me.

Infinity USB Phoenix software, unlike in the Unlimited model, does not have the VCP mode. This is probably why I can easily read IMSI and ICCID, but I keep on getting the "Communication problem... closing COM port..." error message every few minutes while brute forcing Ki.

Anyone managed to extract Ki with Infinity USB Phoenix?

FYI, I am setting the Phoenix mode clock at 3.58MHz and port speed at 9600 baud and my SIM is definitely V1.

Any advice appreciated.
Thanks...

EDITED: I also tried with a Duolabs CAS 3 writer and have exactly the same problem with it (no VCP mode, communication errors)...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.hackint0sh.org/f124/2215.htm
Posted By	For	Type	Date
Pablogeo Blog Archive Cómo liberar el iPhone	This thread	Refback	01-14-2009 07:46 PM
??????????????????? iPhone \| iPhone Blog	This thread	Refback	01-14-2009 07:37 PM
Pablogeo Blog Archive Cómo liberar el iPhone	This thread	Refback	01-14-2009 04:52 PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[1.1.2 OTB] Tutorial MAC/PC with TurboSIM	iMaso	Turbo-, Supersim and Simcloning Solution	1089	10-03-2009 07:21 PM
iPhone Games - NES Emulator	elbarlo	Free Toolchain Software	109	08-17-2009 10:43 PM
Phone Number format	spoonet	Older Software Unlock Solution	130	11-22-2007 12:20 AM
Bye 1.1.2	svlad_jelly	Older Software Unlock Solution	20	11-21-2007 01:20 AM
How to make a 64gb iPhone (the idea)	fabiopigi	Free Toolchain Software	8	10-31-2007 12:12 AM