works great..thanks Maso...unlocked three OTB for use with simms..now to order them...

i have 2 iphones with TurboSim.. and i install the turbosim,, but,,, i have to restore one iphone,, what i have to do to configure the restored iphone with turbosim..???? can u help me plzzz

Just wanted to pop in here and say, thank you.

Fantastic and flawless guide.

I came across one hiccup but, after shaving more of my SIM cards down and aligning the TurboSIM, everything worked.

Without your help, my girlfriend would be a sad chica for Christmas.

Thanks again.

"12. put the original SIM supplied with the iPhone (not your own!) onto the TurboSim and carefully insert it into your iPhone"

Exactly how important is that? I have the TurboSIM and my SIM-card that I want to use after this process. I have done this to one iPhone already, and doing it on the 2nd now.

The thing is this 2nd iPhone didn't come with a AT&T sim. It says "(not your own!)", but important is it? Will I make the TurboSIM break?

Thanks in advanced.

1. i have jailbraked iphone

2 i have a turbosim programed with other iphone..

but.. i want to installa applesaft on this jailbraked iphone,, what i have to do to install the applesaft already all files are on the phone with 0755 rights

note: this turbosim works before with other iphone,, and works fine,, its just installing in other iphone,.. when we use the commands the machine never responds or just put a circle rotating..

LOL and we wouldnt want THAT, would we? happy xmas!

__________________
iPhone US W46 OTB 1.1.2
-> fully restored to 1.1.3 with iTunes
-> fully unlocked to carrier blau.de with ZiPhone

I suppose you will have to erase the turbosim in order to program it new. put it into any phone together with your own sim, with the PIN lock enabled. when the phone asks for the PIN dont enter your 4 digit PIN but the 8 (10)? digit PIN that came with the turbo sim. this will erase all data on the turbo sim. and then you can program it once again with the new phone. if you dont HAVE that turbosim pin, you have a problem.

__________________
iPhone US W46 OTB 1.1.2
-> fully restored to 1.1.3 with iTunes
-> fully unlocked to carrier blau.de with ZiPhone

you will need an original SIM (e.g. AT&T) to withdraw some data from it, whih will be programmed onto the turbosim. you cannot do it without that.

__________________
iPhone US W46 OTB 1.1.2
-> fully restored to 1.1.3 with iTunes
-> fully unlocked to carrier blau.de with ZiPhone

Hi all,

Thanks for the tutorial iMaso. I'm close, but I can't load applesaft.trb no matter what I try.

On a jailbroken phone with the AT&T SIM+TurboSIM out, I unload /System/Library/LaunchDaemons/com.apple.CommCenter.plist, insert my AT&T/TurboSIM, and then run turbo-info and it looks ok:

# turbo-info
initializing modem
AT+CPMS="SM","SM"
ERROR
modem initiated
OK. No Error

However, turbo-app always fails with "ERROR: Bad file." I've tried rebooting and repeating various steps, but always get "Bad file". Here's my turbo-app output with -v. Any help greatly appreciated!

# turbo-app -v /private/var/root/applesaft.trb
SRC /private/var/root/applesaft.trb
SIZE 2021
initializing modem
1 -> ATV1
1 <- ATV1
OK
1 -> ATE1
1 <- ATE1
OK
1 -> AT+CPMS="SM","SM"
1 <- AT+CPMS="SM","SM"
+CPMS: 0,30,0,30,0,50
OK
1 -> AT+CMGF=0
1 <- AT+CMGF=0
OK
1 -> AT+CPMS?
1 <- AT+CPMS?
+CPMS: "SM",0,30,"SM",0,30,"MT",0,50
OK
modem initiated
1 -> AT+CMGW=10
1 <- AT+CMGW=10>
1 -> 029100110000810004FF020C00
1 <- 029100110000810004FF020C00
+CMGW: 21
OK
1 -> AT+CMGR=21
1 <- AT+CMGR=21
+CMGR: 2,,10
029100110000810004FF020C00
OK
1 -> AT+CMGD=21
1 <- AT+CMGD=21
OK
ERROR: Bad File

what exactly do you mean by "shaving" ? off from where?
and is it neccesary?

thanks