Results 1 to 5 of 5
Discuss help me please windows 7 and mac os x HP g61 at the Dual Booting - Hackint0sh.org; please help me out here. im new here to the hackintosh communtiy and was wondering ...
  1. #1
    Newbie Array

    Join Date
    Jan 2010
    Posts
    5
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default help me please windows 7 and mac os x HP g61

    please help me out here. im new here to the hackintosh communtiy and was wondering if anyone could help me here... i have an hp g61 notebook computer with windows 7 and i would like to install mac os x on my notebook as a dual boot any help would be appreciated and which version should i use ipc, iatkos, etc... thanks


    AMD K10
    Windows 7 (6.1) Home Premium Edition (Build 7600)
    CPU Arch : 1 CPU - 2 Cores - 2 Threads
    CPU PSN : AMD Athlon II Dual-Core M300
    CPU EXT : MMX(+), 3DNow!(+), SSE (1, 2, 3, 4A), x86-64, AMD-V
    CPUID : F.6.2 / Extended : 10.6
    CPU Cache : L1 : 2 x 64 / 2 x 64 KB - L2 : 2 x 512 KB
    Core : (45 nm) / Stepping : DA-C2
    Freq : 799.11 MHz (199.78 * 4)
    MB Brand : Quanta
    MB Model : 363F
    NB : AMD 785GX rev 00
    SB : ATI SB750 rev 00
    GPU Type : AMD M880G with ATI Mobility Radeon HD 4200
    DirectX Version : 11.0
    RAM : 3072 MB DDR2 Dual Channel
    RAM Speed : 333 MHz (3:5) @ 6-5-5-15
    Slot 1 : 2048MB (6400)
    Slot 1 Manufacturer : Hyundai Electronics
    Slot 2 : 1024MB (6400)
    Slot 2 Manufacturer : Elpida
    Last edited by thededer; 01-25-2010 at 12:58 AM.



  2. #2
    Newbie Array

    Join Date
    Jan 2010
    Posts
    5
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    please somebody help me

  3. #3
    Newbie Array

    Join Date
    Feb 2010
    Posts
    2
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default RE:help me please windows 7 and mac os x HP g61

    Hi, I have successfully Dual Booted Windows 7 and Mac OSX 10.5.6 on to a Compaq Mini 110c 1100DX Netbook. Considering they are from the same company I think that the BIOS should be somewhat the same. What I did was install Windows 7 first, get that all setup, then go to the control panel and search Partition, and then click on the title that said Create or Partition a Hard Drive. Some gray area saying Unallocated Space Shows up, If it dosent then right click on the main hard drive and click Shrink Partition Volume. Type how much space you want in MB for your OSX partition. After that happens, you will have two partitions. I assume you know how to install OSX from there on, but if you dont send me a reply and I would be happy to help with anything that happens. It is a very tricky process, but by googling and looking on forums found the solution. Try InsanelyMac. I got all my info from that site. Good Luck! Hope you get it running!

  4. #4
    Newbie Array

    Join Date
    Jan 2010
    Posts
    5
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    im not sure what distrobution to use and im not sure on plugins (kexts) and im not sure how to do this im completly noob to hackintosh

  5. #5
    Newbie Array

    Join Date
    Feb 2010
    Posts
    2
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    I used iDeneb 10.5.6 then did the update to 10.5.8. When you click on custumize, alot of drivers (kext) appear. Just try to match the kexts to the specs your computer has. I noticed your computer is a AMD, there is a AMD patch so the os will recognize it as a intel. After you get the os installed. It should hopefully boot if not, just come back here and i will try to help you and guide you through the steps to see whats wrong with it. Also if you get stuck on selecting the drivers I would also be glad to help. Good Luck!


 

 

Similar Threads

  1. Replies: 0
    Last Post: 11-16-2011, 02:00 PM
  2. Replies: 0
    Last Post: 09-14-2011, 05:50 AM
  3. Replies: 0
    Last Post: 04-05-2011, 02:20 AM
  4. Replies: 0
    Last Post: 05-10-2010, 08:25 PM
  5. Replies: 0
    Last Post: 03-27-2008, 02:32 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 09:02 PM.
twitter, follow us!