Results 1 to 8 of 8
Discuss Need help for a dell inspiron 1545 (N0454502) at the Distributions - Hackint0sh.org; ...
  1. #1
    Newbie Array

    Join Date
    Mar 2009
    Posts
    8
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Exclamation Need help for a dell inspiron 1545 (N0454502)

    So, I wan't to run leopard on a dell inspiron 1545 (N0454502).

    This are the specs:
    IntelŪ PentiumŪ Dual Core Processor T4200 (2,00 GHz, 800 MHz, 1 MB cache)
    2.048 MB 800 MHz Dual Channel DDR2 SDRAM [2 x 1.024]
    160 GB (5.400 rpm)
    Intel Integrated GMA 4500MHD
    Dvd+/-rw-station
    4-cel lithium-ion

    So, which distro do I need and how-to install it, please help, I've never done this before



  2. #2
    Hackint0sh Moderator Array icchansan's Avatar

    Join Date
    Sep 2007
    Location
    Puerto Ordaz, Venezuela, Venezuela
    Posts
    6,641
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    349

    Default

    Check there HCL before trying, Im not sure about your video card, I think is not compatible :/
    HP Pavilion Elite m9250f
    Snow Leopard 10.6.6, Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
    Macbook Pro 13"
    iPhone 4
    Follow meh: @icchansan

    If you just want to support hackint0sh.org with a donation click here

  3. #3
    Rookie Array

    Join Date
    Jan 2009
    Posts
    10
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default ideneb 1.4 works

    i installed ideneb 1.4 ( 10.5.6 ) on my insprion 1545. i used the sleep kernal and a few other drivers.. i installed it to a ( USB )160GIG WD hard drive. everything worked right off all but the wireless.. so i hope somone figers what it needed for the rest of what's missing.

  4. #4
    Hackint0sh Moderator Array icchansan's Avatar

    Join Date
    Sep 2007
    Location
    Puerto Ordaz, Venezuela, Venezuela
    Posts
    6,641
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    349

    Default

    Whats your wireless chipset? did you check the HCL?
    HP Pavilion Elite m9250f
    Snow Leopard 10.6.6, Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
    Macbook Pro 13"
    iPhone 4
    Follow meh: @icchansan

    If you just want to support hackint0sh.org with a donation click here

  5. #5
    Newbie Array

    Join Date
    Jun 2009
    Posts
    1
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default Where do I find drivers for dell inpiron 1545

    Quote Originally Posted by itzdemo View Post
    i installed ideneb 1.4 ( 10.5.6 ) on my insprion 1545. i used the sleep kernal and a few other drivers.. i installed it to a ( USB )160GIG WD hard drive. everything worked right off all but the wireless.. so i hope somone figers what it needed for the rest of what's missing.

    Hey all, I tried installing IDeneb v1.4 for my inspiron 1545 it worked in a limited way as in
    1. there is no proper video driver so Iam stuck at 1024x768
    no Intel GM45 Graphics Display VGA

    2. the lan does not work
    no Marvell 88E80XX 10/100 Ethernet Controller Lan Card Driver

    3. no blue tooth , wireless or WiFi drivers around too
    also I need a crash fix file , can anyone enlighten me as where I can find a kex database ? HELP



  6. #6
    Senior Professional Array

    Join Date
    Jun 2009
    Posts
    232
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    16

    Default manually edit the AppleYukon.kext

    You need to manually edit the AppleYukon.kext to put in the vendor and device id. The lan will work then.

    You do not list specs aso I can not tell what the rest of th machine is and I am not going to look it up for specs - if it has Intel 5100 wireless like many Dells - visit iwidarwin

    See - "Read first Before Posting" - http://www.hackint0sh.org/forum/f181/73003.htm

    Read this all the way through - but . . . you need to Google for your answers and do some research instead of relying on and expecting a spoon fed answer. Every machine is different. Visit the link at the bottom of this post.

    Here is a link to generically what is largely supported in IPC 10.5.6 iPC OSx86 10.5.6 Final PPF5 Complete driver list. | OSX86

    netkas.org does support on some of the newer more esoteric NVidia GPU's

    If it is not there in the list above or - it is not supported at this time - so do not cry you want it to be. do not expect someone here to spoon feed you a fix for free. This is a standard paste I use prefaced with a preamble to the question usually. So many people ask the same kind of question - this generic answer fits most all of them.

    First remember someone is sitting at a computer on THEIR time for FREE to answer your question. No one here is getting a salary from Apple. ( I am not - and I am a UNIX engineer) If it is a wild or ridiculous question, or you just keep posting mulitple questions, you'll get noticed and then ignored. If you want some kind of esoteric solution - at first it will be seen as funny and then - at least I will ignore it.

    Second, please realize, the "hackintosh" MAC OS is NOT a commercial software OS product. It is built usually by various individuals - who in their own time put the OS together as a hobby or proof of concept. Trying to upgrade it using ceertain Apple software will lock it up or disable some features. This is not an Apple support line or source, and no one "owes" you anything for FREE support demonstration software. Apple allows this kind of thing - or turns a blind eye so far - because it supports the next product line of computers they might support or retail and helps them refine the use of the UNIX base OS in their business sell legitimate OS software.

    so that said . . . after a successful install, and it does not boot all they way through then f8 at boot, or get to the Darwin prompt, and then . . .

    You need to boot with -s as the command line flag. If it loads that to a command line, you've got likely kext problems. Then try -x -v so you can see where it stops, slows, issues errors or hangs. If you get in that way to a desktop you've got probably video kext problems. These can be LOTS of different problems depending on whose distribution you installed and how old it is. Get the newest one - right now which is 10.5.6. IPC has some issues with laptop keyboards not working after install - IDeneb seems to go better. The Apple retail product in some cases does not have all the support (kexts) for generic machines the hackintosh OS's do - but some distros are not as good as others.

    Look for what loads and what does not load

    NO ONE can help you right now. You do not say what is wrong, you do not say what you did that does not work and you offer no clues as to your level of expertise as to EXACTLY where you are stumped. You just scream "please help me". Posting that you think you got it working without understanding what you did does not help either. You might now really have it working as it should be.

    If you go to a Medical Doctor and just scream "please help me" and will give no symptoms or clues as to what is going on - even a Doctor cannot help you but begin guessing - and guess what - they get paid to do so - no one here is being paid by you, and still the doctor could end up killing you rather than saving you because you did not tell a critic piece of information - like a severe allergy or something like that which could kill you in his efforts to help you. Computers - especially the OS's of computers are NO DIFFERENT.

    You do not say what is going on. No one is a mind reader here and were not sitting in front of your machine.

    Usually a Kext is likely probably not loading or blocking something - or the kernel panics. That means dies the horrible crash like a aircraft pilot would it the pilot panic'ed in an emergency situation and did not know what to do.

    The kexts are vendor and device ID specific - so if the kext does not have the right vendor and model ID referenced in the kext file - it will fail - or pass up the device anyway. The kexts ARE the drivers - and sometimes you only need to change or add the vendor and device ID.

    You have to figure this out yourself - it is YOUR machine. They are all different as to what is in the unit from the manufacturer, and even if using common device components - the vendor and device ID may be different that what the kext might have in it.

    If you have Windows still on the same machine - and it is working - you can do kext editing from inside windows by installing some helper tools to look into the HPS drive. You can use a Windows Text Editor - Editpad Lite (only one that will work) and Ext2Fsd 0.46 - An open source Ext2 File System Driver for Windows - Softpedia and Catacombae - HFSExplorer (HFS Explorer) to see and get at the Mac files in Windows; OR you can BUY Macdrive. If you are having dual boot problems try installing EasyBCD from inside Windows to boot between the two. Its free.

    This above will only work if you have been smart enough to do a dual boot machine where Windows is on another partition or permanent drive in the same computer. If Windows will not boot use a Vista repair disk or the XP disk to repair the boot sector - then install EasyBCD through Windows and it will see the MAC partition to let you set it up on the boot manager. Google how to get one if you do not have them.

    You can see the vendor and device ID in Windows, and the kext will have a name and you can find the vendor and device ID in the text of the kext info.plist. You can edit this from the Windows side with the editor above - and use no other - they will not work.

    After you get in through safe mode, you can run "diskutils repairpermissions /" (without the quotes) and to fix the changes you made from the Windows side.

    You come in single user with the -s command at the prompt. Do what it says to mount the volume and then

    You do a "sudo -s" first (no quotes)
    cd /System/Library
    chmod -R 755 Extensions /
    touch Extensions /
    diskutil repairpermissions /

    If you had trouble with the registration looping or other things then . . . after that above of mounting the volume make a password for root by typing

    passwd root

    Then when done type

    touch /var/db/.AppleSetupDone

    reboot

    There are lots of other ways to do this and much more from the -s boot option (single user mode) but it is really getting UNIX specific as to the commands, and if you are there and know nothing anyway - you should probably pay someone, buy a real MAC or just give up - OR get ready for a real extensive learning curve and research on the web.

    You need to do some research on how the MAC OS works. Match your kext families with the missing parts of the OS not loading - change the vendor and device ID's and one at a time - you'll get them working and the boot errors will go away. You can also read the boot errors that went by too fast in the log after you get in to the OS.

    If you have/had IPC 10.5.6 ppf4 or ppf5 you would likely have most of the kexts - but they might not have the right vendor ID and device ID for the unit you are trying to install on.

    It works for both CPUs Intel or AMD. IDeneb 10.5.6. might go more successfully.

    Once installed, you need to boot in safe mode from the Darwin prompt with the -x option. Use -v also so you can see what it is loading and if it does stop in safe mode and where. Then you can try -v -f on another boot to see if it will make it all the way

    The MacOS is at it's core - UNIX - you cannot just lump a question in something and throw it here that is non-descriptive as to tell anyone not at your PC what is TRULY going on, even though I am a UNIX engineer.

    No one can help you if they cannot tell what is really going on - and if you are not ready to learn some UNIX - give up now.

    If you install the right kexts (Kernel EXTensionS) with the right vendor id's applicable the system will load them as it finds the hardware during the boot process. Remember the kext might be there - but have the wrong vendor and device ID - so it will get passed up.

    Read the clues of the boot process yourself and do some research as to what they mean and then if you have a specific question you cannot find on the Internet or in the forums - that someone can identify - post that.

    Of course you can always BUY a real MAC, and then holler "please help me" all you want to Apple Computer Support, and at some point they will tell you the same thing.

    If you install the right kexts (Kernel EXTensionS) with the right vendor id's applicable the system will load them as it finds the hardware during the boot process.

    Read the clues of the boot process yourself and do some research as to what they mean and then if you have a specific question you cannot find on the Internet or in the forums - that someone can identify - post that.

    Visit the Main Page - OSx86 for the best source of simple question info

  7. #7
    Newbie Array

    Join Date
    Aug 2009
    Posts
    2
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Cool @bobburns

    @bobburns -

    hey man, good response. I have sent you a PM, if you want you could tell me to go stick-it, but I think you could help?

    Quote Originally Posted by bobburns View Post
    You need to manually edit the AppleYukon.kext to put in the vendor and device id. The lan will work then.

    You do not list specs aso I can not tell what the rest of th machine is and I am not going to look it up for specs - if it has Intel 5100 wireless like many Dells - visit iwidarwin

    See - "Read first Before Posting" - http://www.hackint0sh.org/forum/f181/73003.htm
    Visit the Main Page - OSx86 for the best source of simple question info

  8. #8
    Newbie Array

    Join Date
    Oct 2010
    Posts
    1
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    I am on my 1545 and my wireless is working. Pick the Broadcom in your wireless devices on the setup. Broadcom is the manufacture of the dell wireless card. It works like a champ. I am looking for the Intel GM45 Video kext to get my card working right. Everything else is working like a champ!

 

 

Similar Threads

  1. Mac OS X for Dell Inspiron 1545 (2.2 Ghz version)
    By Vikram Raja in forum Installation
    Replies: 0
    Last Post: 11-25-2011, 12:47 PM
  2. Replies: 1
    Last Post: 03-07-2011, 01:51 AM
  3. Dell Inspiron 1545
    By thegameisover in forum Installation
    Replies: 7
    Last Post: 02-02-2011, 10:22 PM
  4. iATKOS for Dell inspiron 1545
    By samjack50009 in forum Installation
    Replies: 1
    Last Post: 05-17-2010, 04:32 AM
  5. Dell Inspiron 1545
    By grjaennette in forum Installation
    Replies: 5
    Last Post: 06-22-2009, 09:14 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 12:23 AM.
twitter, follow us!