Network - Yukon 88E8040T PCI-E
INTEL PRO WIRELESS 3945 ABG

VIDEO - MOBILE INTEL 965 EXPRESS

CPU - INTEL CORE2DUO T5550

HARD DRIVE - 180GB SATA

MAINBOARD - it just says toshiba p305 on sisoft sandra.

Almost forgot, thanks! any help is much appreciated!

I have been able to install Mac Os X on my Toshiba P305. My install options for iPC 10.5.6 Final are listed below.

Main problems are:

-Only works on external display, laptop display does not work.
-wifi does not work (but you can buy a new wifi card that does for US$18)
-mem card reader does not work
-built in mic does not work


Here is my install setup

Toshiba P305 Intel Duo Core 2.16 GHZ 4GB RAM
IPC 10.5.6 Final / 9.4.0 StageXNU Universal Kernel / AppleACIPBattery Manager / Clamshell / Dualboot Time Sync/ Seatbelt 10.5.5 fix / Shutdown restart fix / PS/2 keyboard fix / Kext Helper b7
LAN: Marvell Yukon 88e8040T works with standard 10.5.7 drivers
sound: Conexant High Def SmartAudio 221 works using VoodooHDA
wifi: Intel Pro 3945ABG (not working)
video: IntelGMA X3100 10.5.6 original drivers (only external monitor works)
webcam: Chicony 2.0 USB works with CAMTWIST driver
harddisk: dual 320GB

you can get the Yukon 88E8040T driver here

WORKING Solution for Marvell Yukon 2 88E8040 Fast Ethernet! - InsanelyMac Forum

The details of my laptop are listed below. My video card is GMA X3100 Device ID:0x2a02 Rev 0x000c and I have the 1.5.36 standard X3100 drivers from an iPC 10.5.6 install. My problem is that the external monitor works fine but the laptop display is all black (but powered on). I have tried all different versions of the X3100 drivers that have been listed here in this thread but nothing works. Screen sleep trick does not work, and also the power button then 's' trick does not work. With one of the drivers, I was able to get an all blue screen on the laptop display, but then OS would not boot all the way.

I have installed SwitchResX, and made a custom settings with the info from the EDID info listed below but that also does not work. I have noticed that in SwitchRes is identifies my laptop display name as "VGA/SVGA Display", but it identifies my external monitor by its correct manufacture name. SwitchResX crashes when i boot (red X on the app icon when i start), but then i can click on the app icon in the menu bar and it seems to start ok. EDID from SwitchResX for the laptop display gives this:

EDID Version........1.2
Manufacturer........LPL
Product Code........417 (01A1) (A101)

Descriptor #0 is Timing definition:
Mode = 1440 x 900 @ 59.939Hz
Pixel Clock............. 96.21 MHz Non-Interlaced

Horizontal Vertical
Active.................. 1440 pixels 900 lines
Front Porch............. 64 pixels 1 lines
Sync Width.............. 32 pixels 3 lines
Back Porch.............. 224 pixels 8 lines
Blanking................ 320 pixels 12 lines
Total................... 1760 pixels 912 lines
Scan Rate............... 54.665 kHz 59.939 Hz

Image Size.............. 367 mm 230 mm
Border.................. 0 pixels 0 lines

Sync: Digital separate with
* Negative vertical polarity
* Negative horizontal polarity

Descriptor #1 is Unknown descriptor. ASCII interpretation follows (?)
Descriptor #2 is ASCII data: LGPhilipsLCD
Descriptor #3 is ASCII data: LP171WP4-TLN1

In system preferences > Display it shows the correct resolutions for the laptop display, but none of them work.

Toshiba P305 Intel Duo Core 2.16 GHZ 4GB RAM
iPC 10.5.6 Final / 9.4.0 StageXNU Universal Kernel / Clamshell / Dualboot Time Sync/ Seatbelt 10.5.5 fix /Shutdown restart fix / PS/2 keyboard fix
LAN: Marvell Yukon 88e8040T works with standard 10.5.7 drivers
sound: Conexant High Def SmartAudio 221 works using VoodooHDA
wifi: Intel Pro 3945ABG (not working)
video: IntelGMA X3100 10.5.6 original drivers (only external monitor works)
webcam: Chicony 2.0 USB works with CAMTWIST driver
harddisk: dual 320GB

Intel GMA X3100:

Chipset Model: GMA X3100
Type: Display
Bus: Built-In
VRAM (Total): 144 MB
Vendor: Intel (0x8086)
Device ID: 0x2a02
Revision ID: 0x000c
Displays:
Display:
Resolution: 1440 x 900
Depth: 32-bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme:Supported
Built-In: Yes
SDM-P232W:
Resolution: 1920 x 1200 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme Supported
Rotation: Supported

I am using these original drivers from the IPC 10.5.6 install
AppleIntelGMAX3100 1.5.36
AppleIntelGMAX3100FB 1.5.36
AppleIntelGMAX3100GA.plugin
AppleIntelGMAX3100GLDriver.bundle
AppleIntelGMAX3100VADriver.bundle
AppleIntellIntegratedFramebuffer.kext (no changed if I remove it)

After you finish the iPC 10.5.6 Final install

boot with -f -s.

When you get to the shell prompt type

mount -uw /
mkdir /drivers
mv /System/Library/Extensions/AppleIntelGMA* /drivers
reboot

Then you you can finish the install process. Once this is done connect an external monitor. Then use Kext Helper to reinstall all the GMAX3100 files in the /driver directory and reboot.

You will see the wallpaper on the external monitor but not the dock or menus.

1. with external monitor connected, click anywhere in external monitor to ensure finder is selected
2. press shift-alt-a
3. type "sys"
4. press alt-o
5. type "displays"
6. hit enter
7. at this point you should get the window to change resolutions
8. click gather windows
9. set both internal and external monitors to correct resolutions (if 1280x800, set to 1280x768 first - use SwitchResX when all is working to get proper 1280x800x32@60)
10. click on Arrangement in the display props to change the external monitor to be the primary monitor by dragging the menu bar to external monitor.

once you do this final step the external becomes the primary display.

I also fine it useful to use VNC to connect to my Hackintosh sometimes when a window pops up on my laptop display and I cannot see it. Just got to System Props > Sharing > Screen Sharing to turn on the VNC server. Then click Computer Settings to set the VNC login password for the VNC connection.