saw another boot option
rd=diskx (x meaning disk to boot from)
still the same
Printable View
saw another boot option
rd=diskx (x meaning disk to boot from)
still the same
You will need:
* iATKOS V1.0i R2
* Windows XP/Vista
* EasyBCD [For Dual-Booting]
Installation:
1. Download the iATKOS v1.0i R2 from TPB
2. Burn the ATKOS v1.0i R2 to a DVD+/-R at 4X speed (DO NOT USE DVD+/-RW OTHERWISE YOU'LL SCREW UP)
3. Open diskpart and type the following:
4. Slide in your iATKOS V1.0i R2 DVD and reboot the computerQuote:
list disk
select disk x [x is the number of the disk where you want to install your leopard on it]
list partition [Now diskpart should tell you there's no partition on the disk, if it show up a partition go ahead and type delete partition]
create partition primary id=af
active
exit
5. Go into BIOS and set these options:
* HPET: Enabled
* Jmicron SATA Controller: Disable
* Onboard IEEE1394: Disable [you can enable it after the installation]
6. Boot from the DVD. Press F8 when it asks you and enter the options "-v" [If it doesn't load/freeze/kernel panic boot with "-v -f cpus=1"]
7. When it is loaded, open Disk Utility from the Utilities menu
8. Select your hard drive and click on partition
9. On Volume Schme select 1 partition and enter your desire name,
10. On format select as MAC OS X Extended (Journaled)
11. On options select as Master Boot Record
12. Create the partition
13. Quit Disk Utility
14. Go to the next step and click customize
* Bootloaders:
If you have a Core 2 CPU, select "EFI Bootloader" [it tend to be more stable with core 2 CPU]
otherwise select "Darwin X86 Bootloader"
* Patch:
Select "SEE2 SEE3 Kernel" If you don't have a Core 2 CPU
Select "Remove CPUPowerManagementDriver"
Select "Remove Thermal kexts"
*Driver:
Select "Netkas AppleSMBIOS.kext"
Select the other drivers that applies to you
[NOT RECOMMEND SELECTING ANY OTHER DRIVERS BESIDE NETWORK and VGA]
*For 8800 Series Users:
Select the AMD/nForce fix driver
Select the NVInject driver that applies to you
15. Once you're done click install
16. Go ahead and skip DVD verification if you want [Installation might take from 30min to 1 hour, so relax, get a cup of coffee]
17. When the installation is done reboot your computer
FOR DUAL-BOOTING
* Boot in to XP/Vista
* Download EasyBCD 1.7.1
* Install and open the program
* On the Add/Remove Entries click on Mac OS X and select x86
* Enter the name you want example "Mac OS X Leopard"
* Click add entry
* Reboot your computer
18. Press F8 when it ask you and boot with "-v"
19. If you get kernel panic/freezes boot with "-v -f cpus=1"
20. After the system has loaded, you will see a Leopard Welcome Video if you have selected the appropriate video driver.
21. Enter informations now have a working Leopard Desktop!!!
But wait not yet, you might notice the performance is very slow, because you did not enable UDMA yet.
Download the NForceATA Driver to your desktop [Thanks to medevil]
Open terminal and type the following:
To get Line In to work:Quote:
sudo -s
cp -R ~/desktop/AppleNForceATA.kext /system/library/extensions/
chmod -R 755 /system/library/extensions/AppleNForceATA.kext
chown -R root:wheel /system/library/extensions/AppleNForceATA.kext
rm -f /system/library/extensions.*
diskutil repairpermissions / (might take a while, be patient)
exit
you need the ALC883 8.8.1 Audio patch [Thanks to Skippy] (I know is for kernel 8.8.1 but work great under leopard without any problem)
To install, click on the installer, and install it. [DO NOT CHOOSE 3port_digital, LEAVE IT AS 3port OR IT WILL CRASH YOUR SYSTEM!]
Now reboot your leopard
You should notice your leopard load faster, higher performance! Plus your Line-In is working now!
--FOR CPUS=1 ISSUE--
this is for users that can't boot with dual-core/quad-core
NON-EFI Users:
download the P5N-E SLI Fix Patch
Drag both "mach_kernel" and IOHDIXController.kext to the desktop
Open Terminal and type:
EFI Users:Quote:
sudo -s
cp -R ~/desktop/mach_kernel /mach_kernel
cp -R ~/desktop/IOHDIXController.kext /system/library/extensions/
chmod -R 755 /system/library/extensions/IOHDIXController.kext
chown -R root:wheel /system/library/extensions/IOHDIXController.kext
rm -f /system/library/extensions.*
diskutil repairpermissions / (might take a while, be patient)
exit
sudo reboot
download the 10.5.1 EFI Nforce Kernel and drag mach_kernel to the desktop
Open Terminal and type:
EDIT:Quote:
sudo -s
cp -R ~/desktop/mach_kernel /mach_kernel
diskutil repairpermissions / (might take a while, be patient)
exit
sudo reboot
How to easily replace your Leopard kernel from Windows [Thanks to revolutionbr]
1- Get MediaFour MacDrive 7, it's a program that allows Windows to recognize and navigate through HFS+ partitions. This makes really easy to backup kexts, kernel and any other file from your leopard installation, even if it's broken.
2- Open your Leopard drive and right on the root, you'll find mach_kernel, which is your kernel file. Backup the file anywhere you want (it's okay to backup it on a windows partition though) and then overwrite it with your new kernel file.
3- Reboot and enter in Leopard using -v -f flag.
4- When back in Leo, enter the terminal app and enter the following:
Quote:
sudo -s
(enter your password)
diskutil repairpermissions /
reboot
5- Wait for reboot and enjoy your just patched OSX.
If you have any kernel panic or booting problem, just get back to windows and slip back your old kernel file.
This time, boot with -v -f (no more cpus=1! And next time you can boot without kernel flag!)
Now both of your core works! And If you run some 3D Apps such as StuntMANIA!Pro Racing game, you'll notice increase in framerate.
Instant Loop Problem
If you tried to boot your leopard but it just keep restart, here's the solution:
Slide yout iATKOS DVD back in [Don't forget to use "cpus=1" if you need to!]
when is loaded click next and click customize
uncheck everything except "SSE2 SSE3 Kernel"
Install it
reboot
Now you should be able to boot into your leopard [[Don't forget to use "cpus=1" if you need to!]
USB Flash Drive Problem:
If you can't mount your USB Flash Drive, follow the steps below:
Download the USB Fix (Thanks to TheTimester)
Extract it to the desktop
Drag both System.kext and IOUSBMassStorageClass.kext to /system/library/extension
replace it and when ask for password type so
open disk utility and repair permission
reboot
Now your USB Flash Drive should be able to mount. :hack:
Special Thx to KellyKelly
Idea:
icchansan, post your "Lightbulb P5N-E SLI nForce Guide" as a new thread. Think is very good for other users.
;)
This is my first attempt to install Mac on a PC. I purchased the Retail version 10.5.4 and can I use it to install. I ordered it from Newegg and should have it in a couple of days. Can I even use a retail disk?
Hiya there, can you tell us your specs?Quote:
Originally Posted by gyoung1988
Asus P5N-E Sli, 4G Ram, New SATA Seagate 500G HD, Intel Core 2 Duo E6300 Conroe 1.86GHz LGA
APPLE Mac OS X v10.5.4 Leopard (New version) - Retail
I want to do a clean install, no duel booting.
Ah ok, looks like it gonna work, follow this thread, btw theres a new kernel called voodoo, maybe works for you really good :D