Results 1 to 2 of 2
Discuss MAC OS X 10.4.8 Launch Troubles. Help! at the Archiv (Leopard) - Hackint0sh.org; Hi, everyone! I'm writing regarding my MAC OS X troubles. At the beginning i'd like ...
  1. #1
    Newbie Array

    Join Date
    Apr 2007
    Posts
    1
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default MAC OS X 10.4.8 Launch Troubles. Help!

    Hi, everyone!

    I'm writing regarding my MAC OS X troubles.
    At the beginning i'd like to sorry you for my English and ask for an indulgence. I'm new to OS X...

    Two days ago, I have decided to install MAC OS X 10.4.8. I have used previously downloaded JAS 10.4.8 AMD Intel SSE2 SSE3 DVD. Once I have it installed it boots up, but i cannot get it to work, becouse of kernel panic. And i think it doesn't depend on CPU, but on graphics card...

    I had tried to find some informations over the net, before i have written here, but the only information i have found is that it's problem with graphics card and i'm not the only one, who have this...

    That is what it prints before hangs up:
    Code:
    SAT1: family specific matching fails
    SAT2: family specific matching fails
    IDE0: family specific matching fails
    display: family specific matching fails
    XVR0: family specific matching fails
    XVR1: family specific matching fails
    XVR3: family specific matching fails
    SMB0: family specific matching fails
    VT86: family specific matching fails
    USB0: family specific matching fails
    USB2: family specific matching fails
    MMAC: family specific matching fails
    MACI: family specific matching fails
    pci10de,5e: family specific matching fails
    Matching service count=25
    NVDANV40HAL Loaded and registered
    display: family specific matching fails
    HUB0: family specific matching fails
    panic (cpu 0 caller 0x001A3129): Unresolved Kernel trap (CPU0, Type 14=pagefault), registers:
    CR0: 0x8001003B, CR2: 0x00000000, CR3: 0X00b79000, CR4: 0x000006e0
    EAX: 0x00000000, EBX: 0x022bb800, ECX: 0x00000000, EDX: 0x00000000
    CR2: 0x00000000, EBP: 0x13b33e28, ESI: 0x02166000, EDI: 0x00000000
    EFL: 0x00010206, EIP: 0x2ab0a0ea, CS: 0x00000008, DS: 0x00000010
    
    Debugger called: <panic>
    Backtrace, Format-Frame> Return Address (4 potential args on stack)
    
    0x13b33c48: 0x128d1f (0x3c9728 0x13b33cbc 0x131ed0 0x0)
    0x13b33c88: 0x1a3129 (0x3cec08 0x0 0xe 0x3ce438)
    0x13b33d98: 0x19aaf4 (0x13b33da8 0x0 0xe 0x48)
    0x13b33e28: 0x293f9ea7 (0x22bb800 0x22bb800 0x1 0x3be0f5)
    0x13b33eb8: 0x38be9b (0x22bb800 0x2166000 0x287ea40 0x22bb800)
    0x13b33f38: 0x38b703 (0x22bb800 0x287e880 0x0 0x3c0fb1)
    0x13b33f88: 0x38ce48 (0x22bb800 0x8 0x134e3a 0x38cd6e)
    0x13b33fc8: 0x19a96c (0x28879a0 0x0 0x19d0b5 0x233f160) Backtrace terminated-invalid frame pointer 0x0
    
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.GeForce(4.3.6)@0x293d4000
    dependency: com.apple.iokit.IOPCIFamily(2.1)@0x23c5a000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.4)@0x23d3f000
    dependency: com.apple.iokit.IONDRVSupport(1.4.4)@0x23d5a000
    dependency: com.apple.NVDAResman(4.3.6)@0x2ab08000
    Kernel version:
    Darwin Kernel version 8.8.1: Sat Dec 9 22:18:27 AZOT 2006; semthex:/nebukadnezar/BUILD/obj/release-I386

    My computer's configuration:
    Code:
    CPU: AMD Athlon64 3000+ Venice @ 2528MHz
    Mobo: Gigabyte GA-K8NXP-9 (nForce4 Ultra)
    GPU: Gigabyte GeForce 6600 TurboForce Edition NX66 series accelerator (NV43)
    MEM: 2x TwinMOS 512MB DDR400 CL2.5 DualChannel
    HDD: Samsung Sp0411N (40GB ATA/133): here OS X is installed
    HDD: Seagate ST30817SA (80GB SATA/150): here i have Gentoo Linux installed
    DVD: Toshiba SD-M1802
    DVD+/-RW: Plextor PX-708A


    Some info about graphics card:
    Code:
    05:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a2)
    Some info about CPU:
    Code:
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    Some info about chipset:
    Code:
    00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
    00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
    00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
    00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
    00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
    00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
    00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
    00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
    00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
    00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
    00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
    00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
    00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
    I have readen that soeone has succesful launched OS X on Athon64 3200+ (Venice). Someone else has it done on the same motherboard as mine...

    My friend has GeForce 6600GT and he also got it to work...
    I wonder why i doesn't work for me?

    I would be really gratefull if you could help me...
    THANKS!



  2. #2
    Professional Array xtreme571's Avatar

    Join Date
    Apr 2007
    Location
    USA
    Posts
    52
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    11

    Default

    try installing without titan/natit...see if that works.

    your mobo might be a conflict as well.
    Before you ask any question, try searching it first.
    Search Button is ur best friend...so is google.

    I AM IN NO WAY TELLING YOU TO COMMIT PIRACY. IF YOU LIKE OS X OR ANY PART OF IT. BUY A MAC.
    TESTING 4 PCs and 1 Macbook . Only the macbook works perfectly .

    If any members post has helped you...add to their rep.

 

 

Similar Threads

  1. Having some troubles ...
    By lyMikee in forum Installation
    Replies: 0
    Last Post: 07-17-2011, 04:43 PM
  2. Having troubles..
    By Kootoe in forum Installation
    Replies: 0
    Last Post: 12-03-2009, 05:16 AM
  3. So I'm new to this and have some troubles...
    By Shenec in forum iOS 3.x (iPhone OS 3.x)
    Replies: 1
    Last Post: 10-04-2009, 09:24 AM
  4. [1.02] Installer troubles
    By dimigon in forum General
    Replies: 1
    Last Post: 01-04-2008, 04:23 AM
  5. SSH/password troubles
    By fussel in forum General
    Replies: 9
    Last Post: 12-10-2007, 12:17 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 12:36 PM.
twitter, follow us!