Page 1 of 2 12 LastLast
Results 1 to 10 of 16
Discuss [Kalyway] stuck at gray apple screen at the Archiv (Leopard) - Hackint0sh.org; hello I'm in need of some help I'm trying to install kalyway 10.5.2 AMD and ...
  1. #1
    Rookie Array

    Join Date
    Oct 2007
    Posts
    13
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default [Kalyway] stuck at gray apple screen

    hello I'm in need of some help I'm trying to install kalyway 10.5.2 AMD and I'm having some problems getting it going I have made a 15gig partition unallocated on my 100gb hard drive. I'm using vista I put disk in tray reboot run disk by pressing f10 at start up. Darwin loader comes up I press any key or do f8 and try a -x next the apple gray screen comes up with the loading cricle sits there for awhile then a small white square with a cricle in it (like a no smoking type sign) and then after a while it shuts down. Can some one please help please. Comp specs below. I have by the way a leo4allv3 and kalyway 10.5.2 AMD discs not sure if ones better then the other. Thx

    Gateway mx7525
    Vista ultimate
    Processor: mobile AMD Athlon 64 processor 4000+ 2.6GHz
    Memory (ram) 1534mb
    System type: 32-bit os
    Graphics: ATi mobilty radeon X600 128mb



  2. #2
    IRC Netadmin
    Team of Hackint0sh
    Array f41qu3's Avatar

    Join Date
    Nov 2006
    Posts
    1,572
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default

    Try use a Leo4All v3 DVD. Is better for AMD Systemz.

    If you just want to support hackint0sh.org with a donation click here.

    Twitter: @f41qu3 @hackint0sh @hmbt_org @iphone_dev

  3. #3
    Rookie Array

    Join Date
    Oct 2007
    Posts
    13
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    ok when I use the leo4all and at Darwin I do f8 then -v I get a lot of text runs by looks like it's going fine then goes to 2nd black screen with more text at the end it says
    Extension "com.apple.driver.AppleOnboardPCATA" has no explicit kernal dependency; using version 6.0
    ApplePS2controller: timed out on mouse input stream.
    IOPCCardBridge:: start failed
    Still waiting for root device
    Still waiting for root device

    Not sure if that helps. But it might

  4. #4
    IRC Netadmin
    Team of Hackint0sh
    Array f41qu3's Avatar

    Join Date
    Nov 2006
    Posts
    1,572
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default

    It's a incompatibility with your chipset.

    Need try test other OSX86 version.

    (Or try use other connection of HDD/DVD).
    If you just want to support hackint0sh.org with a donation click here.

    Twitter: @f41qu3 @hackint0sh @hmbt_org @iphone_dev

  5. #5
    Rookie Array

    Join Date
    Oct 2007
    Posts
    13
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    My chipset is a ATi radeon xpress 200m. And i'm not sure whatyou mean by hdd/DVD is there a guide I can read to get an idea? I'm also trying to download some more distro's? See if one works. Thanks for the help so far and any else you give.


  6. #6
    Rookie Array

    Join Date
    Oct 2007
    Posts
    13
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    can I use an USB extranal HDD

  7. #7
    IRC Netadmin
    Team of Hackint0sh
    Array f41qu3's Avatar

    Join Date
    Nov 2006
    Posts
    1,572
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default

    I don't know...you need to test to know...
    If you just want to support hackint0sh.org with a donation click here.

    Twitter: @f41qu3 @hackint0sh @hmbt_org @iphone_dev

  8. #8
    Newbie Array

    Join Date
    Aug 2008
    Posts
    2
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by f41qu3 View Post
    Try use a Leo4All v3 DVD. Is better for AMD Systemz.

    I've been trying to get kalyway 10.5.2 to work on my system...but with mixed results. Depending on the options i select during install i get either:

    (a) grey apple screen (if i dont select legacy flag)

    (b) "still waiting for root device" or

    (c) the applenforceata found 0 units code (if i leave that mobo selection checked)...i got it to boot into the os once, that was with the applenforceata box checked...however it didnt read my usb external drive and wouldnt boot back into the os on reboot.

    also: I get "appleUSBHCI: unable to inittialize UIM" in the script I've noticed.

    Do you think I would have a better shot with leo4all? or can someone enlighten me on which boxes to check during installation or any other helpful ideas...I've been making a chart on what boxes I tick and the results but havent found the right combo yet...

    system:
    msi 7260 board
    nvidia nforce 550 chipset
    amd ath 64 dual core 4200+
    geforce 7600gt
    two 250 gig sata drives (external is usb/not main drive)

    also: dual-booting with xp

    trying to use:
    "Kalyway_10.5.2_DVD_Intel_Amd"
    Last edited by thisredbox; 08-10-2008 at 07:08 PM.

  9. #9
    Newbie Array

    Join Date
    Aug 2008
    Posts
    2
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    i too got stuck on the grey screen telling me to reboot when using kalyway
    i dont understand why a patched osx has to be so difficult

  10. #10
    IRC Netadmin
    Team of Hackint0sh
    Array f41qu3's Avatar

    Join Date
    Nov 2006
    Posts
    1,572
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default

    Quote Originally Posted by thisredbox View Post
    I've been trying to get kalyway 10.5.2 to work on my system...but with mixed results. Depending on the options i select during install i get either:

    (a) grey apple screen (if i dont select legacy flag)

    (b) "still waiting for root device" or

    (c) the applenforceata found 0 units code (if i leave that mobo selection checked)...i got it to boot into the os once, that was with the applenforceata box checked...however it didnt read my usb external drive and wouldnt boot back into the os on reboot.

    also: I get "appleUSBHCI: unable to inittialize UIM" in the script I've noticed.

    Do you think I would have a better shot with leo4all? or can someone enlighten me on which boxes to check during installation or any other helpful ideas...I've been making a chart on what boxes I tick and the results but havent found the right combo yet...

    system:
    msi 7260 board
    nvidia nforce 550 chipset
    amd ath 64 dual core 4200+
    geforce 7600gt
    two 250 gig sata drives (external is usb/not main drive)

    also: dual-booting with xp

    trying to use:
    "Kalyway_10.5.2_DVD_Intel_Amd"
    Leo4All v3 is better for AMD Systemz, Kalyway don't properlly work on there.
    If you just want to support hackint0sh.org with a donation click here.

    Twitter: @f41qu3 @hackint0sh @hmbt_org @iphone_dev


 

 
Page 1 of 2 12 LastLast

Similar Threads

  1. kalyway stuck on apple boot screen
    By joeyduude in forum Installation
    Replies: 1
    Last Post: 06-17-2011, 10:03 AM
  2. Keys out of order Rebuilding catalog b-tree, stuck on gray apple screen
    By GeorgeRamosJr in forum Kernel / Kext (Driver) Support
    Replies: 2
    Last Post: 04-07-2010, 11:59 PM
  3. Asus p5n7a-vn kalyway 10.5.2 gray screen
    By cabal2000 in forum Installation
    Replies: 3
    Last Post: 09-27-2009, 11:51 PM
  4. iATKOS - Mac OSX boot stuck at Gray Screen?
    By quantass in forum Installation
    Replies: 0
    Last Post: 05-02-2009, 02:36 AM
  5. Kalyway 10.5.1 stuck on grey apple screen
    By vinitg in forum Archiv (Leopard)
    Replies: 2
    Last Post: 03-05-2008, 10:49 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 05:38 PM.
twitter, follow us!