I have tried several installations such as iAtkos 10.5.1 and Kalyway 10.5.1 with no success. So, I then tried JAS 10.4.6 with no success. The farthest I have gotten is with JAS 10.4.8 including SSE2/SSE3 with PPF1 and PPF2. I can install fully with 10.4.8, but get a Kernel Panic screen on bootup. I have noticed this seems to be very common, but have found no resolution to this issue.

My system includes the following:
Processor(s)

Number of processors 1
Number of cores 1 per processor
Number of threads 1 per processor
Name Intel Pentium 4
Code Name Northwood
Specification Intel(R) Pentium(R) 4 CPU 2.66GHz
Package Socket 478 mPGA
Family/Model/Stepping F.2.7
Extended Family/Model F.2
Brand ID 9
Core Stepping C1
Technology 0.13 um
Core Speed 2666.3 MHz
Multiplier x Bus speed 20.0 x 133.3 MHz
Rated Bus speed 533.3 MHz
Stock frequency 2666 MHz
Instruction sets MMX, SSE, SSE2
L1 Data cache (per processor) 8 KBytes, 4-way set associative, 64-byte line size
Trace cache (per processor) 12 Kuops, 8-way set associative
L2 cache (per processor) 512 KBytes, 8-way set associative, 64-byte line size

Chipset & Memory

Northbridge Intel i845G rev. B1
Southbridge Intel 82801DB (ICH4) rev. 02
Graphic Interface AGP
AGP Revision 2.0
AGP Transfer Rate 4x
AGP Side Band Addressing not supported, not enabled
Memory Type DDR
Memory Size 768 MBytes
Memory Frequency 133.3 MHz (1:1)
CAS# Latency (tCL) 2.5 clocks
RAS# to CAS# (tRCD) 3 clocks
RAS# Precharge (tRP) 3 clocks
Cycle Time (tRAS) 6 clocks

System

System Manufacturer HP Pavilion 06
System Name DA194A-ABA 764N
System S/N MX30604331 NA920
Mainboard Vendor MICRO-STAR INTERNATIONAL CO., LTD
Mainboard Model MS-6577
BIOS Vendor Phoenix Technologies, LTD
BIOS Version 3.10
BIOS Date 01/09/2003

Memory SPD

Module 1 DDR, PC2100 (133 MHz), 512 MBytes, Hyundai Electronics
Module 2 DDR, PC2100 (133 MHz), 256 MBytes, SpecTek Incorporated

Software

Windows Version Microsoft Windows XP Media Center Edition Professional Service Pack 2 (Build 2600)
DirectX Version 9.0c



I have an NVideo GeForce4 MX 440 with a Sound Blaster Audigy 2. If any other information I would gladly retrieve it. Any help would be greatly appreciated as to what I need to do. Thanks!

Any suggestions from anybody?

Thanks guys

I've send a PM linking to a tutorial that should help you.