Page 29 of 66 FirstFirst ... 919202122232425262728293031323334353637383949 ... LastLast
Results 281 to 290 of 656
Discuss How to install Leopard on HP Pavilion Elite Desktop at the Archiv (Leopard) - Hackint0sh.org; dear icchansan and all the other, i have the same computer as yours... HP 9290m.it ...
  1. #281
    Rookie Array

    Join Date
    Dec 2008
    Posts
    29
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default please HELP me with driver

    dear icchansan and all the other,
    i have the same computer as yours... HP 9290m.it (same mainboard, same cpu, 1.5 TB hdd, Gforce 8800gt...)
    After installed leo4all i have some problem with video driver card. (i have downloaded for 10.5.2 but after install the resolution remain to 1024x768... i see other resolution mode but if i select 1280x1024 60hz computer remain blue like freeze and after a hard reset the resolution is always 1024x768...

    i dont find LAN & WIRELESS driver could you send me the link.. please???

    tnx in advance for your help

    hope in your powerfull knowledge..
    remain waiting...

    Alberto.


  2. #282
    Hackint0sh Moderator Array icchansan's Avatar

    Join Date
    Sep 2007
    Location
    Puerto Ordaz, Venezuela, Venezuela
    Posts
    6,641
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    349

    Default

    For video please check the link in the post installation part, it will work for 8400~8800 GT, so you'll be fine, if your LAN and Wireless are different then ours, please post your chipset
    HP Pavilion Elite m9250f
    Snow Leopard 10.6.6, Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
    Macbook Pro 13"
    iPhone 4
    Follow meh: @icchansan

    If you just want to support hackint0sh.org with a donation click here

  3. #283
    Senior Professional Array dray's Avatar

    Join Date
    Sep 2008
    Posts
    106
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    11

    Thumbs up HP Pavilion Elite m9340f

    Ok, I was able to install JaS OSx86 10.5.4 ver! However, being new to all this, I am having several issues. No ethernet or wireless. It is only running on 1 core,resolution only available in 1024x768. No ps2 functionality(keyboard)and under hardware overview, it does not list the correct hardware.Sound does work!!I did not update the BIOS. Could not check off options "All and 1" under NON Critical block,It was greyed out. I did see an update available for my BIOS on the HP website for Ver5.32. I do have to boot using "CPUS=1" command or it will keep rebooting. Anyway to fix this? I am a newbie so please, detailed instructions!! eg; where and how to update/install drivers!
    Many Thanks in advance for all your hard work!!

    Here are my system specs:

    Core 2 Quad Q6700 (K) 2.66 GHz
    1066 MHz front side bus
    Socket 775
    Chipset
    Intel G33 Express
    Manufacturer: Asus Motherboard Name: IPIBL-LB
    Memory Installed 6 GB
    Hard drive 750 GB SATA 3G (3.0 Gb/sec)7200 rpm
    16X DVD(+/-)R/RW 12X RAM (+/-)R DL LightScribe SATA drive
    Wireless Ralink Wireless LAN Card
    Video Graphics GeForce 9500 GS 512 MB GDDR2 memory
    I/O Ports: HDMI, VGA, dual-link DVI
    TV tuner card with FM tuner
    Sound/Audio Integrated High Definition audio
    Realtek ALC 888S chipset

  4. #284
    Hackint0sh Moderator Array icchansan's Avatar

    Join Date
    Sep 2007
    Location
    Puerto Ordaz, Venezuela, Venezuela
    Posts
    6,641
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    349

    Default

    Try to open the BIOS MOD before select the Options, then you can select they "All and 1" if you dont want to MOD your BIOS or Cant do it, try to use DSDT Patcher and Chamaleon with DSDT Override, you need to use Retail OSX, I cant update this tutorial for this yet cuz I need a new HDD for this, you need to use the whole HDD for this installation so... Read about these stuff and try to follow this guide too, good luck

    P.S. I think theres a guy here with your same computer, but you have to check all the pages @.@
    HP Pavilion Elite m9250f
    Snow Leopard 10.6.6, Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
    Macbook Pro 13"
    iPhone 4
    Follow meh: @icchansan

    If you just want to support hackint0sh.org with a donation click here

  5. #285
    Senior Professional Array dray's Avatar

    Join Date
    Sep 2008
    Posts
    106
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    11

    Wink

    I believe I missed that step! I went straight to the AUWIN process.Will modifying my BIOS resolve all these issues? Also, do I need to re-install OS X and start from the beginning? I am dual booting with Vista. Will it be affected in anyway when flashing the BIOS? I will look for that thread.

    Thank You !
    Last edited by dray; 12-31-2008 at 03:12 PM.


  6. #286
    Hackint0sh Moderator Array icchansan's Avatar

    Join Date
    Sep 2007
    Location
    Puerto Ordaz, Venezuela, Venezuela
    Posts
    6,641
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    349

    Default

    Yeah after MOD your BIOS you dont need to use cpus=1, no idea if you need to install again but try to boot after mod to check it out

    Check this post to dual boot Vista/OSX


    Good Luck
    HP Pavilion Elite m9250f
    Snow Leopard 10.6.6, Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
    Macbook Pro 13"
    iPhone 4
    Follow meh: @icchansan

    If you just want to support hackint0sh.org with a donation click here

  7. #287
    Rookie Array

    Join Date
    Nov 2008
    Posts
    17
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Talking Upgrade power supply and video to 9800 GT, it works!

    My wife bought me a $25 500Watt PS with PCIE16x power connector and a BFG 9800 GT OC/512MB for Christmas (www.tigerdirect.com et al) < $200 CDN.

    Happy to report the PS fit fine in the case, and the 9800 GT works including CI/QE with Leopard 10.5.6.

    So now my investment, is $99 for another 720MB drive, $200 for PS/Video, and $650 for the 8430f. About a $1000 CDN, or $750 USD. Much cheaper than a Mac Pro, lol. I'm using the ICH9R chipset RAID0, so I'm not using the two drives under Leopard, just under Vista and Ubuntu.

    Oh and without any tape mods or anything, I used clockgen.exe to set my FSB to 329, RAM runs at 490MHz, instead of 400MHz, CPU is 2.94GHz and is highly stable. Somehow clockgen.exe magically updates something somewhere, so that the settings stay set even when I boot into Leopard. I tried FSB at 333 but the ram went to 500MHz, and it was not stable. Anyway 23% speed improvement instead of 25% is close enough After playing Crysis for a few hours (maxed out btw) the CPU didn't go above 58C. Runs at about 37C when idle at the 2.94GHz setting.

    Anyone know how to change (a utility other than clockgen.exe or setfsb.exe) the RAM timings to not be 2:3 but something else to keep it running at 400MHz when the FSB is changed? Or even better a hacked AMI bios for the mainboard that has features to do this (like a real ASUS mainboard, rather this crippled OEM bios).

    Happy New Year!

    Hardware Overview:

    Model Name: Mac
    Model Identifier: KJ382AA-ABA m9250f
    Processor Name: Intel® Core(TM)2 Quad CPU Q6600 @
    Processor Speed: 2.94 GHz
    Number Of Processors: 1
    Total Number Of Cores: 4
    CPU Features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM SSE3 MON DSCPL VMX EST TM2 SSSE3 CX16 TPR PDCM
    Memory: 4 GB
    Bus Speed: 1.31 GHz
    Boot ROM Version: XXXX.88Z.XXXX.XXX.0712261124 (American Megatrends Inc.)
    Serial Number: SOMESRLNMBR
    L2 Cache: 8 MB

  8. #288
    Hackint0sh Moderator Array icchansan's Avatar

    Join Date
    Sep 2007
    Location
    Puerto Ordaz, Venezuela, Venezuela
    Posts
    6,641
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    349

    Default

    You hax0r great news, then you release features in the BIOS? What are you using retail or iatkos to update? eh dunno anything about overclock >,<: cant try but good news, didnt buy any new fan? Merry Xmas and Happy New year
    HP Pavilion Elite m9250f
    Snow Leopard 10.6.6, Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
    Macbook Pro 13"
    iPhone 4
    Follow meh: @icchansan

    If you just want to support hackint0sh.org with a donation click here

  9. #289
    Rookie Array

    Join Date
    Nov 2008
    Posts
    17
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Smile RE: Upgrade power supply and video to 9800 GT, it works!

    > didnt buy any new fan?

    No new fan, I'm using the stock Cool Max CPU fan that came with the HP.
    I'm using iAtkos 10.5.4 as the base install, then I upgrade to 10.5.5 then 10.5.6 using the tips from links you posted. Much thanks.

    Most of the overclocking sites say the Q6600 can easily use a 400MHz FSB (CPU would be 3.6GHz, vs 2.4GHz at 266Mhz) and stay stable and relatively cool. But I would need a "real ASUS" mainboard with bios support to change the FSB:RAM clock ratio and change voltages etc. The RAM seems to be the stability point on these HP machines. I couldn't push it past 490MHz. I may upgrade to 8MB of RAM, if so I may get OC'able RAM or something, but that would push the price of this hackintosh way past $1000 CDN, which would be sort of silly; I could have built a custom system from scratch for about the same price.

    BTW, you can get clockgen from www.cpuid.com
    Use the IDT CV174C PLL

    http://www.ocforums.com/showthread.php?t=569900

    Anyway with the 9800GT I can play Crysis and Fallout 3, which were not playable with the stock 8500GT (yes on Vista, not mac os).

    I'm still struggling with the boot132/Chameleon stuff, but I hope to use a firewire drive instead of USB drive; I think I finally figured out how to insert all the correct kexts into the ram disk image for firewire support; a couple more hours hacking and I'll post back the details. Though I'm pretty addicted to Crysis right now

    Happy New Year.

  10. #290
    Senior Professional Array dray's Avatar

    Join Date
    Sep 2008
    Posts
    106
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    11

    Default

    So I was able to mod my BIOS and no longer need to boot with cpus=1. However, I tried to install the video driver posted on your post installation tutorial and now when I boot into OS X, it asks me restart with Chinese letters under it. Is there a way to undo this change without having to re-install Leopard?

    Thanks!


 

 

Similar Threads

  1. How to install Leopard on HP Pavilion Elite Desktop
    By icchansan in forum Installation
    Replies: 532
    Last Post: 05-01-2012, 06:31 PM
  2. Replies: 100
    Last Post: 02-13-2011, 08:36 PM
  3. hp pavilion elite desktop m9340f HELP!!!! PLEASE!!
    By kevinmdj in forum Installation
    Replies: 1
    Last Post: 03-17-2010, 08:19 PM
  4. HP Pavilion Elite e9160f Desktop - any suggestion
    By igi123456 in forum Distributions
    Replies: 1
    Last Post: 09-01-2009, 09:07 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 02:41 PM.
twitter, follow us!