Discuss Hackintosh Problem at the Archiv (Leopard) - Hackint0sh.org; I have installed iAtkos v4i on a 20gb drive but it doesn't boot! It is ...
-
Supporter Array
Hackintosh Problem
I have installed iAtkos v4i on a 20gb drive but it doesn't boot! It is the only os and it gets to the countdown. It counts down then reboots. Any ideas because i REALLY want this to work and i am a bit of a n00b at this.
-
-
IRC Netadmin
Team of Hackint0sh
Array
Post back here your detailed hardware info.
-
-
Supporter Array
Intel desktop motherboard, Intel pentium 4 processor, Maxtor 20gb Hard Drive, built in graphics to motherboard.
-
IRC Netadmin
Team of Hackint0sh
Array

Originally Posted by
Rooster212
Intel desktop motherboard, Intel pentium 4 processor, Maxtor 20gb Hard Drive, built in graphics to motherboard.
This not help. Need Detailed models/chipsets.
-
-
Supporter Array
Sorry, i'm not very good at this stuff 
I don't really know what you mean. Sorry.
Er, Ram? 512mb. Thats all else i could really tell you, i don't really know.
-
IRC Netadmin
Team of Hackint0sh
Array

Originally Posted by
Rooster212
Sorry, i'm not very good at this stuff
I don't really know what you mean. Sorry.
Er, Ram? 512mb. Thats all else i could really tell you, i don't really know.
LOL
Example: Read this thread, to know what I talking about: http://www.hackint0sh.org/forum/showthread.php?t=37447
-
-
Supporter Array
doesn't matter, i don't know how to find any of that stuff and i just managed to get a mac mini off ebay
-
IRC Netadmin
Team of Hackint0sh
Array
Everest and CPU-Z on Windows side maybe help you.
-
-
Supporter Array
OK i didn't win the mac mini someone else got it 
Downloading everest now so will get back to you.
Also tried kalyway, all modes (-x, -s etc) same prob.
-
Supporter Array
Desktop/Laptop: Desktop
Prebuilt: No
Mainboard Model D865GLC (0x1BD - 0x4F67C3)
Installation Methods: not managed yet
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name Intel Pentium 4
Codename Northwood
Specification Intel(R) Pentium(R) 4 CPU 2.80GHz
Package Socket 478 mPGA (platform ID = 2h)
CPUID F.2.9
Extended CPUID F.2
Brand ID 9
Core Stepping D1
Technology 0.13 um
Core Speed 2792.9 MHz (21.0 x 133.0 MHz)
Rated Bus speed 532.0 MHz
Stock frequency 2800 MHz
Instructions sets MMX, SSE, SSE2
L1 Data cache 8 KBytes, 4-way set associative, 64-byte line size
Trace cache 12 Kuops, 8-way set associative
L2 cache 512 KBytes, 8-way set associative, 64-byte line size
FID/VID Control no
Chipset:
Northbridge Intel i865P/PE/G/i848P rev. A2
Southbridge Intel 82801EB (ICH5) rev. 02
Memory Type DDR
Memory Size 512 MBytes
Channels Dual
Memory Frequency 166.2 MHz (4:5)
CAS# 2.5
RAS# to CAS# 3
RAS# Precharge 3
Cycle Time (tRAS) 7
Performance Mode enabled
Memory:
DIMM #1
General
Memory type DDR
Manufacturer (ID) Kingston (7F98000000000000)
Size 256 MBytes
Max bandwidth PC2700 (166 MHz)
Part number K
Serial number 60146E99
Manufacturing date Week 14/Year 04
Attributes
Number of banks 1
Data width 64 bits
Correction None
Registered no
Buffered no
Nominal Voltage 2.50 Volts
EPP no
XMP no
Timings table
Frequency (MHz) 133 166
CAS# 2.0 2.5
RAS# to CAS# delay 3 3
RAS# Precharge 3 3
TRAS 6 7
DIMM #2
General
Memory type DDR
Manufacturer (ID) Kingston (7F98000000000000)
Size 256 MBytes
Max bandwidth PC2700 (166 MHz)
Part number K
Serial number 0111E00D
Manufacturing date Week 36/Year 03
Attributes
Number of banks 1
Data width 64 bits
Correction None
Registered no
Buffered no
Nominal Voltage 2.50 Volts
EPP no
XMP no
Timings table
Frequency (MHz) 133 166
CAS# 2.0 2.5
RAS# to CAS# delay 3 3
RAS# Precharge 3 3
TRAS 6 7
Hope this helps, really want a Hackint0sh!!! :hack:
-
Similar Threads
-
By Raghav_K in forum General - Lion 10.7.x
Replies: 1
Last Post: 08-09-2011, 03:33 AM
-
By yumadilov in forum Kernel / Kext (Driver) Support
Replies: 1
Last Post: 05-06-2011, 01:16 PM
-
By kane38885 in forum Installation
Replies: 2
Last Post: 01-13-2011, 04:19 PM
-
By Alandalf in forum Installation
Replies: 0
Last Post: 09-19-2010, 11:46 AM
-
By dannyosx in forum Installation
Replies: 1
Last Post: 08-18-2010, 04:33 PM
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks