Discuss ATI x1950 pro at the Archiv (Leopard) - Hackint0sh.org; i have ATI x1950 pro. i get is a blue screen with no mouse. In ...
ATI x1950 pro
i have ATI x1950 pro. i get is a blue screen with no mouse. In -v mode it recognizes the card or at least identifies it, but it hangs at the blue screen. How do you fix this?
Anybody know how to get past the blue screen with the x1950 pro???
Try switching to the other port on the video card. I had the same problem and this worked for me.
Originally Posted by tbar
The problem I had with my x1950 xt was when I installed one of the x1950 drivers I only saw the background blue screen on both ports using the DVI connector. I had to switch to the DVI to 15 pin VGA adapter in order to see the desktop on one of the ports.
Good luck, I know it took quite a bit of experimentation to get it all sorted out.
Unfortunately the x1950 pro is only partially working on a hac. What you need is the file Natit edited which can be found in insanelymac forum. with that you dvi pot will work and there will not a blue screen. You will have resolutionchange ect.
The problem is that there will not be Quartz extreme and Core image accelaration. The Atix1000.kext namely does not support the x1950 pro. The result till now is a kernel panic. Hoefully new ati drivers will eventually support it.
Otherwise get a 1950 XT or XTX instead.
With this installer version 3, you now get FULL DVI and DUAL MONITOR SUPPORT!!!
Works for both X1950XT 7244 and X1900XT 7249
Should also give resolution support for the X1950 Pro (7280) not qe/ci though
You will get full qe/ci/rotat/openGL/res change support dual dvi and dual monitor
Here is the link
Hi guys, I have the same problem with my OSX86
You know, I am a windows user and never had contact with an apple computer (they are quite expensive in Brasil)... so...
I have the folowing pc
Radeon X1950 Pro Powercolor
With Jas OSX86 10.4.8 (have not updated to 10.4.9 yet)
When I boot, i see the grey apple screen and then I get stuck in the blue screen.
Now, about this driver, how can i install it if i can't enter the OS?
can someone teach me?
Sorry, one more thing. Can someone tell me what this other port mean? And how do I try this fix?
Originally Posted by tbar
most of thise cards got more then one output.
Originally Posted by grbrum
it was a tip to try the other output.
don't know if it is right or wrong to call an dvi output port, but this is how it should be understand
languages are really bad "protocols" if you are a non native
uphuck 1.3 on sata with pata dvd
k8n-e deluxe nforce 3 fully working
sil controler not testet
line out works, line in not testet
radeon x1650 agp 256mb ddr33 with this link
no DVI, everything else ist working
system hangs on shutdown or reboot, will crash when clickin about this mac
and varios other errors happen randomly
Hey, google jccool ati
i used his driver on my x1950 pro and now it works fine (no hardware aceleration support though), but at least I have full resolution support.
By revlimiter in forum Installation
Last Post: 06-25-2010, 06:47 AM
By tissemikkel in forum Hardware
Last Post: 12-10-2008, 10:41 PM